ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Easy and effective offset serve arm for rudder.
16 posts
 
   3DBatix Forum Index -> Workshop
 
Author Message
Balsa+Nitro



Joined: 21 Jul 2004
Posts: 22

PostPosted: Mon Aug 16, 2004 7:55 pm    Post subject: Easy and effective offset serve arm for rudder.  

Well I needed an offset servo arm in a hurry, and came up with one that works great, has adjustable offset and length, is cheap, and best of all most of us have the correct parts laying around to make it. It is made from the spare servo arms that come with Hitec 5945 servos. You attach two of the 4 arm red RC car arms to the shorter of the two full arms with Micro Fasteners servo screws. The excess screw on the bottom side needs to be cut off with a dremel cutoff wheel. The holes align perfectly, and the screws hold them perfectly tight. The red arms can be moved in of out to dial in length, and cut to the correct offset. No drilling is required. I can hold the rudder to stall my 5945 servo (183 oz) and there is no flexing.


Rudder Servo, 600p.jpg
 Description:
Offset arm in Yak 54.
 Filesize:  59.36 KB
 Viewed:  560 Time(s)

Rudder Servo, 600p.jpg



_________________
"...The only thing that counts is faith expressing itself through love." Galatians 5:6
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Mon Aug 16, 2004 10:22 pm    Post subject:  

Interesting... Idea
_________________
--Meyrick--
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Tue Aug 17, 2004 9:54 am    Post subject:  

Meyrick wrote:
Interesting... Idea


very....

but seems like it would work. smile

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 300
Location: Tacoma(area), WA

PostPosted: Tue Aug 17, 2004 4:17 pm    Post subject:  

Yes it should work..but for how long?? How big is this plane?? That's some scary stuff if it's bigger than 1/4 scale
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
Balsa+Nitro



Joined: 21 Jul 2004
Posts: 22

PostPosted: Tue Aug 17, 2004 6:12 pm    Post subject:  

It's an 8lb 2oz Yak from Extreme Flight.
_________________
"...The only thing that counts is faith expressing itself through love." Galatians 5:6
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 300
Location: Tacoma(area), WA

PostPosted: Tue Aug 17, 2004 7:44 pm    Post subject:  

Hmm it's probably light enough where it'll be fine.. Check those bolts a lot though!! Shocked
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Tue Aug 17, 2004 10:48 pm    Post subject:  

Itll stay, those are the hex head servo screws from central hobbies, they are really tight goin into servo arms like that.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Wed Aug 18, 2004 4:33 am    Post subject:  

thats a good idea! I don;t see why it wouldn't work no mattero the size of the plane just make sure it is strong enough control horns smile you could even use if you were scared about the screws little bolts with nuts and some loctite
_________________
-Chris-
3D Foamy
Back to top  
craigman



Joined: 31 May 2004
Posts: 105
Location: Redding, CA

PostPosted: Fri Aug 20, 2004 7:53 pm    Post subject:  

It should be just fine...
Really,, when have you ever seen a plastic servo horn break? Me,, never... I've seen some pretty nasty crashes where it tears off a rudder or elevator, or whatever, and have never seen a broken servo horn.
Good luck!
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 300
Location: Tacoma(area), WA

PostPosted: Fri Aug 20, 2004 10:54 pm    Post subject:  

Not talking about the arm breaking. Talking about those bolts vibrating loose.
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Fri Aug 20, 2004 11:35 pm    Post subject:  

they are wood screws dude, they arent commin out.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 300
Location: Tacoma(area), WA

PostPosted: Sat Aug 21, 2004 8:32 pm    Post subject:  

Hope not
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Sat Aug 21, 2004 8:57 pm    Post subject:  

i do however question the splice that seems to be existent next to the servo mounting tabs..
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 300
Location: Tacoma(area), WA

PostPosted: Sun Aug 22, 2004 9:17 pm    Post subject:  

Oh whoa. Didn't even see that.
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
Balsa+Nitro



Joined: 21 Jul 2004
Posts: 22

PostPosted: Mon Aug 23, 2004 3:58 am    Post subject:  

It's not a splice. I marked the center of the rails with a felt tipped pen so I could get the servo mounted dead center. That's all.
_________________
"...The only thing that counts is faith expressing itself through love." Galatians 5:6
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1025
Location: Sunnyvale, CA

PostPosted: Mon Aug 23, 2004 3:42 pm    Post subject:  

After lookin at it..i thought that that was probably what it was...
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
 
   3DBatix Forum Index -> Workshop All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive