ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

4.8v,6.0v & 7.2v
13 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Sun Sep 12, 2004 12:28 pm    Post subject: 4.8v,6.0v & 7.2v  

I have always just used 4.8v. What are the higher voltage for?
To change a system from one to the other do you just change out the battery, or is there some type of regulator?
thx
Shaun
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Sun Sep 12, 2004 12:35 pm    Post subject:  

For a 6V nimh pack you dont need to run a regulator. The higher voltages, like the 7.4v packs need a regulator. The receiver will only run off ~6V tops.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Sun Sep 12, 2004 12:57 pm    Post subject:  

Zak, I'm guessing the higher voltage is for more performance?
I just got a Funtana 90 yesterday.
This will be my first 3-d plane!
I cant afford to throw down the $$$ for the ds8411"s right now,
I'm looking at the Hitec hs635hb's with karbonite gears. At $29.99 each = 69.0oz,0.15 sec at 4.8V OR 83.0oz, 0.18sec at 6.0v
http://www.servocity.com/html/hs-635hb_high_torque.html
Would I be able to tell the difference between 4.8 and 6.0? Question
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 279
Location: Tacoma(area), WA

PostPosted: Sun Sep 12, 2004 1:52 pm    Post subject:  

On some of my planes I've run 4.8 then 6.0 and could tell the difference. Depends on the plane and how "in tune" you are with it I suppose. More voltage will give your servos more speed and torque.
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Sun Sep 12, 2004 5:09 pm    Post subject:  

Go with 6V on that plane. Youll notice the higher speed of the servos, and the added torque is a bonus.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Sun Sep 12, 2004 5:16 pm    Post subject:  

Ok thanks, Will do!
So I am assuming that all I have to do is unplug the 4.8vbattey and plug in a 6.0v? Thats all there is to it?
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Sun Sep 12, 2004 5:19 pm    Post subject:  

Yep, im pretty sure the wall chargers do 6V as well.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Sun Sep 26, 2004 5:29 am    Post subject:  

Ok Zak, Or anyone else that can help.
This is the battery that I just bought.http://horizon.hobbyshopnow.com/products/description.asp?prod=JRPB4470
It's a JR 6v 5cell 2400mha .
I put it on the standard wall charger that came with my radio for 20 hrs and it didn't take a charge?
Does that mean I need to go get a new charger?
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 916
Location: Fremont, CA

PostPosted: Sun Sep 26, 2004 6:05 am    Post subject:  

Shaun wrote:
Ok Zak, Or anyone else that can help.
This is the battery that I just bought.http://horizon.hobbyshopnow.com/products/description.asp?prod=JRPB4470
It's a JR 6v 5cell 2400mha .
I put it on the standard wall charger that came with my radio for 20 hrs and it didn't take a charge?
Does that mean I need to go get a new charger?


Check the chargers output information. Maybe it's designed to charge only 4 Cells 4.8v which has a maximum voltage output of 5.8v and it will not charge a 6v battery. In that case you need a charger that is capable of charging 5 cells 6v

_________________
--Meyrick--
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Sun Sep 26, 2004 6:51 pm    Post subject:  

Ok, Thanks Meyrick.
I went out and bought a real Battery charger tonight.
Thx
Shaun
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 279
Location: Tacoma(area), WA

PostPosted: Sun Sep 26, 2004 9:27 pm    Post subject:  

What'd you get?
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Mon Sep 27, 2004 2:52 am    Post subject:  

Ace super 3 digipace.Are quick chargers bad on you battery?
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 916
Location: Fremont, CA

PostPosted: Mon Sep 27, 2004 4:48 am    Post subject:  

Shaun wrote:
Ace super 3 digipace.Are quick chargers bad on you battery?


Quick chargers are fine. Your battery capacity is large enough. For that 2400mah, I would charge it at 1.5~2 amp rating for quick charging. But if you have time, try charging it slower overnight.

_________________
--Meyrick--
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive