ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

UCANDO question
3 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
DiabloKid



Joined: 20 Sep 2004
Posts: 11
Location: Washington DC

PostPosted: Mon Sep 20, 2004 7:19 am    Post subject: UCANDO question  

hi guys, I watched the vid from Meyrick and have a question.

You got the plane to do a flat spin and was wondering what the planes setup was/is? I have one with a Saito 100 and the cg pretty far back but I cant get it to flat spin!

What is your planes setup and did you do any mixing? I have a Futaba 9C and mixing is still new to me Smile

thanks

matt

_________________
www.HideinMy.com
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 716
Location: Fremont, CA

PostPosted: Mon Sep 20, 2004 8:50 am    Post subject: Re: UCANDO question  

DiabloKid wrote:
hi guys, I watched the vid from Meyrick and have a question.

You got the plane to do a flat spin and was wondering what the planes setup was/is? I have one with a Saito 100 and the cg pretty far back but I cant get it to flat spin!

What is your planes setup and did you do any mixing? I have a Futaba 9C and mixing is still new to me Smile

thanks

matt



Hi Matt, I'm running a Saito 100 now. I use an elevator to Ail and elevator to flap mixing. So when I'm in 3D rate condition, When I do full down elevators both Ails goes down as well. It seems the UCD flat spins better by adding this mix.

_________________
--Meyrick--
Back to top  
DiabloKid



Joined: 20 Sep 2004
Posts: 11
Location: Washington DC

PostPosted: Mon Nov 01, 2004 10:13 am    Post subject:  

thanks for the response, I will have to sit down with someone and have them show me how to do. I am getting used to the radio now but mixing is'nt sinking in yet with me Rolling Eyes

matt

_________________
www.HideinMy.com
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive