ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Zaks funtana video?
28 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Wed Sep 22, 2004 5:10 am    Post subject: Zaks funtana video?  

Zak,
Have you got the motor problems worked out yet?
I think it's about time for a video isn't it?
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 917
Location: Fremont, CA

PostPosted: Wed Sep 22, 2004 5:59 am    Post subject:  

I think he scrapped the YS motor. He's thinking about getting a Saito 1.80 for the Funtana. Insane!
_________________
--Meyrick--
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Wed Sep 22, 2004 6:39 am    Post subject:  

Saito 180!!!!!!!!!!!!!
That makes me feel SOOOooooo not worthy with my saito 100 Sad
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 367
Location: Morgan Hill, CA

PostPosted: Wed Sep 22, 2004 7:27 am    Post subject:  

I flew a funtana 90 with a Saito 1.50 and it was perfect. The plane weighed 9.5 Ibs. I think the 150 and 180 weigh the same, so... even better.
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Wed Sep 22, 2004 9:21 am    Post subject:  

Tom Uhlendorf wrote:
I flew a funtana 90 with a Saito 1.50 and it was perfect. The plane weighed 9.5 Ibs. I think the 150 and 180 weigh the same, so... even better.


I've been meaning to ask, how are these planes coming out to be 9.5-10.0 Lbs? Mine weighs under 9 lbs (between 8.5 - 8.75 lbs) and that is with dual wire tail brace, HS-5645MG all around, 20 oz tank, different tail wheel, Blocked wheel pants, YS 1.10FZ, beafed up wings, Robart hinges and control horns and a 1650 NiMH 5-cell battery. I've double checked the scale accuracy also.

I don't have a pilot either so that may contribute some.

Either way, the Saito 150 or 180 would be a great combo.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Wed Nov 03, 2004 8:05 pm    Post subject:  

Zak............... Where's the video Question
_________________
http://www.texomarc.org/
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 917
Location: Fremont, CA

PostPosted: Wed Nov 03, 2004 8:18 pm    Post subject:  

Shaun wrote:
Zak............... Where's the video Question


I don't think he has a reliable motor yet that would last 4 minutes. Mr. Green

_________________
--Meyrick--
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Thu Nov 04, 2004 6:09 am    Post subject:  

Oh, I see. Thks
_________________
http://www.texomarc.org/
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Fri Nov 05, 2004 4:41 pm    Post subject:  

Yeah that stupid YS still doesnt run right. If someone would only buy it! That way i could drop a Saito 180 in it.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Sat Nov 06, 2004 3:49 am    Post subject:  

Ok, I'll give you $50 Wink
_________________
http://www.texomarc.org/
Back to top  
STILLBRANDON



Joined: 24 Dec 2004
Posts: 3
Location: PALM COAST FL

PostPosted: Sat Dec 25, 2004 10:34 pm    Post subject:  

Hello Guys,
I need some info from you..I have my S90..Going this Wed to get me a engine for it..I have spent alot of time trying to get the right one..What do you think I should put on it..Everyone says the YS 110 is the perfect one..I know that the guy Kyle has a YS 120 on his..Flys so good on the video..I was thinking of getting a Saito 180 ..sure not much differance in weight..Will that be over kill on power..will it hover at 1/4 throtle..I just don't want to get to much power that I have to stay way below 1/2 throtle..One more question..Will the Cowl still work on the plane if I put a Saito 180 on it ? Please let me know what you think..How about the YS 140 ? I am lost and need the help of you guys..Thanks..Brandon In FL Very Happy
Back to top  
tavis



Joined: 23 Dec 2004
Posts: 8

PostPosted: Sun Dec 26, 2004 7:49 am    Post subject:  

STILLBRANDON wrote:
Hello Guys,
I need some info from you.I was thinking of getting a Saito 180 ..sure not much differance in weight..Will that be over kill on power..will it hover at 1/4 throtle..I just don't want to get to much power that I have to stay way below 1/2 throtle..One more question..Will the Cowl still work on the plane if I put a Saito 180 on it ? Please let me know what you think..How about the YS 140 ? I am lost and need the help of you guys..Thanks..Brandon In FL Very Happy


Hi Stillborne, Very Happy I had a new YS 140L and never could get it to run good[NO MIDRANGE]So I sold it and took a $200 loss Boo hoo! I have always had great proformance from Saito, so I think I will go with a GK1.50 or 1.80.I also am wondering if the 1.80 would be too much.There is such a thing as too much power you know.I have a 6 lb Su-Do-Khoi with a 1.00 on it and it is hard to controle.It hovers at 1/4 throtle so ther is not much of a linier throtle curve.Also i think the 1.80 will need a larger tank than the stock one in the kit.Then you will have more fuel wheght.Or if you keep the stock tank you will have short flights. My sudokhoi has a 8 oz. tank with the 1.00 and i get 6 min. of 3D flying.I would like 10 min. but cant carry the extra fuel [wing loading].
I am not shure the ys 110 is going to be as strong as Kyle's 1.20 and I would not want to use anything less than he did.The saito 1.50 is looking like the best choice so far but I realy would like the 1.80 for the same size and weight just $25 more.
I also wonder if the 1.80 is going to cause the plane to wing rock in hairier fom the masive extra torqe and long 18x6 prop.Now I am thinking of longer landing gear too hense[MORE whieght] d'oh! I strongly think you cant go wrong with the 1.50 Pray This is the stuff that keeps me awake at nite tossing and turning AnxiousI would greatly apreshiate some mor imput on this from some one that has a 1.80 on thers.Thanks Wink
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 917
Location: Fremont, CA

PostPosted: Sun Dec 26, 2004 8:07 am    Post subject:  

I think the Sai180 is a beast. Although all the Funtana I've seen flying at my field uses them. I'm going with the Saito 120 with an APC 17x4W prop, 20/20 fuel. This should be just enough.
_________________
--Meyrick--
Back to top  
tavis



Joined: 23 Dec 2004
Posts: 8

PostPosted: Sun Dec 26, 2004 8:16 am    Post subject:  

Idea If you go with the saito 1.80 and it hovers at 1/4 thotle with not much throtle curve you can alwas throtle back on the linkage so the carb only opens just short of full throtle.Some expo on thotle may also work.
This way you could alwase use the 1.80 on a bigger plane later.not that you would ever want another plane though after fying the Funtana .90 Drool
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Sun Dec 26, 2004 8:32 am    Post subject:  

tavis wrote:

I am not shure the ys 110 is going to be as strong as Kyle's 1.20 and I would not want to use anything less than he did. The saito 1.50 is looking like the best choice so far but I realy would like the 1.80 for the same size and weight just $25 more.


Tavis, I have a YS 1.10FZ and my FT90 hovers less than half throttle and has great pull out power. I use a APC 16x4 with 20% spinning @ 10,300. I have unlimited vertical at two clicks over half throttle. I haven't tried 30% yet, but the 1.10FZ (atleast mine) is as strong as kyle's 1.20. Probably stronger than the 1.20 on 30%. I have a APC 16x6, but my Tru-turn spinner is touching the prop so I am not going to go use it. I don't trust it touching. The YS 1.10FZ has been compared to the Saito 150 since the YS 1.20 is no longer beginning produced. The Saito 1.20 can't touch the 1.10FZ IMHO. My FT90 weighs 8.62 lbs, so I'm sure that has something to do with it also.

My YS .91FZ spinning a 15x6 hovers another plane that weighs 9.1 lbs easily, but doesn't have as much pull out as the 1.10FZ spinning an APC 16x4.

Please don't under estimate the YS 1.10FZ's power, but the Saito 150 or 180 would be an excellent choice also. The 180 is stonger than the 1.10 as you would already know, but the 150 and the 1.10 are pretty close in power (usable power, not specified HP ratings which mean nothing in the real world).

Just my opinion,
DTB

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
tavis



Joined: 23 Dec 2004
Posts: 8

PostPosted: Sun Dec 26, 2004 8:59 am    Post subject:  

Meyrick wrote:
I think the Sai180 is a beast. Although all the Funtana I've seen flying at my field uses them. I'm going with the Saito 120 with an APC 17x4W prop, 20/20 fuel. This should be just enough.


For thos like Kyle that have goten there hands on good running YS thats the ticket.But I dont think the Saito 1.20 will have the power that a [good running YS 1.20 like Kyles} will have.I am thinking of going with the Saito 1.80 and adjusting the servo to limit power and gass usage.
By the way do the people using the 1.80 at your club have prop clealance problems.
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Sun Dec 26, 2004 10:26 am    Post subject:  

Ive flown one with the 180, and its not too much. The prop clearance has been fine ( i dont think the LG were modified). The 180 is a good amount of power though.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
tavis



Joined: 23 Dec 2004
Posts: 8

PostPosted: Sun Dec 26, 2004 6:33 pm    Post subject:  

3dbatixkid wrote:
Ive flown one with the 180, and its not too much. The prop clearance has been fine ( i dont think the LG were modified). The 180 is a good amount of power though.


Thanks Zak,
I am glad to hear this.What size gas tank would you recomend for 10min.+ fight times.
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Sun Dec 26, 2004 7:18 pm    Post subject:  

tavis wrote:
3dbatixkid wrote:
Ive flown one with the 180, and its not too much. The prop clearance has been fine ( i dont think the LG were modified). The 180 is a good amount of power though.


Thanks Zak,
I am glad to hear this.What size gas tank would you recomend for 10min.+ fight times.


I would think 16 oz is PLENTY if you can squeeze the tank in there.

_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
TeamMoki3D



Joined: 08 Oct 2004
Posts: 386
Location: Belvidere, NJ

PostPosted: Mon Dec 27, 2004 11:55 am    Post subject:  

you could always put a YS 1.40 in it
_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
Montgomery



Joined: 07 Dec 2004
Posts: 4
Location: Tampa, Florida

PostPosted: Tue Dec 28, 2004 3:53 am    Post subject: The 180 is a good amount of power though.  

The 180 is great in this plane! With 90oz. metal gear servos in the back & 2 batterys @ the back of canopy, it will ballance @ 7 1/2" behind leading edge with no dead weight anywhere. You will heve to redrill the fire wall though. the hole pattern needs to be about 1/8" farther apart for the 180.
A 14oz tank gets you about 11-12 min.
Back to top  
Montgomery



Joined: 07 Dec 2004
Posts: 4
Location: Tampa, Florida

PostPosted: Tue Dec 28, 2004 4:01 am    Post subject: do the people using the 1.80 at your club have prop clealane  

I have A 18/6 and about 2" of ground clearance left. Your only going to be on the ground for about 2' anyway, 17/4 should be fine.
Back to top  
tavis



Joined: 23 Dec 2004
Posts: 8

PostPosted: Tue Dec 28, 2004 7:11 pm    Post subject:  

TeamMoki3D wrote:
you could always put a YS 1.40 in it



Had one.Ran like ####. Mad
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Mon Jan 17, 2005 7:17 pm    Post subject:  

Im happy to say that my dad pulled off a miracle and my YS runs great now. I will put some flights on the plane and then hopefully get some video.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 63
Location: Milwaukee,WI

PostPosted: Mon Jan 17, 2005 7:20 pm    Post subject:  

Sweet! Very Happy What was wrong with it?
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Mon Jan 17, 2005 7:22 pm    Post subject:  

He set the regulator back to flush, and got a really low idle goin. Trick is, you have to have it running at under 2k rpm before you can check to see if the low end is set right. Then he did the top end and it all ran great.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Tue Jan 18, 2005 6:38 am    Post subject:  

Glad to here you got the ys going again Zak,
When you had the 120 in the plane before did you have to move the rudder and the throttle servo up for balance of the cg?

I have the saito 100 in mine right know but I just found a great deal on a used ys120. Wink .

_________________
http://www.texomarc.org/
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Tue Jan 18, 2005 7:02 am    Post subject:  

All my stuff is in the stock locations. My battery is mounted on the former which is behind the wing bolts. I have a new battery from Fomeco comming for it. The TP 1900 in it is in bad shape i think.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive