ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

3-D BI-WING?
13 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Shaun



Joined: 10 Sep 2004
Posts: 188
Location: texas

PostPosted: Tue Oct 12, 2004 8:34 am    Post subject: 3-D BI-WING?  

Have any of ya'll tried a bi-wing for 3-d flying?
_________________
http://www.texomarc.org/
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 650
Location: Fremont, CA

PostPosted: Tue Oct 12, 2004 10:26 am    Post subject:  

Just the Foame II... Mr. Green
_________________
--Meyrick--
Back to top  
-3de-



Joined: 25 Sep 2004
Posts: 25
Location: Reno----911

PostPosted: Tue Oct 12, 2004 12:20 pm    Post subject:  

Anyone seen Chip Hydes Double vision fly in person? The vid's I've see of it look sweet.
http://www.chiphyde.com/html/dv/doublevision.html

Video link:
http://www.chiphyde.com/images/products/dv/chipdvhi.wmv
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 188
Location: texas

PostPosted: Tue Oct 12, 2004 8:10 pm    Post subject:  

What a great looking bipe! I wish I could afford to play with the big boys toys Crying or Very sad
_________________
http://www.texomarc.org/
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 92
Location: Kalamazoo, MI

PostPosted: Wed Oct 13, 2004 12:46 pm    Post subject:  

Just this last Sunday I got a chance to see an Elite Ultimate bipe fly ( I beleive thats the name of it ). It was pretty awesome. VERY stable with plenty of athority. The wind was blowing up to, I'd say, 7mph and it was doing quite well Very Happy
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 188
Location: texas

PostPosted: Wed Oct 13, 2004 8:34 pm    Post subject:  

I have toyed with the idea of getting a foamy, I just can't make up my mind?
_________________
http://www.texomarc.org/
Back to top  
pattern3dflyer



Joined: 13 Oct 2004
Posts: 9

PostPosted: Mon Oct 18, 2004 6:47 pm    Post subject:  

I have an E-Flite Ultimate with the E-Flite 370 brushless and a Phoenix 10. It is the most fun you can have with your pants on. period.

When you are hovering with no wind and in the sweet spot it will actually get stuck in a tork roll. All I do is hold a smidge of right rudder and my right hand goes completely away from my transmitter and it spins like a top. Talk about fun!

It snaps so fast its a blur! The 370 on a fresh charge pulls it up like a model rocket. The stock motor I got was defective but I hear it will hover on a fresh charge. Just get the brushless.

George Hicks did an awesome job of design. I can't wait to get his Tensor. I hear you can do a rolling harrier on the tensor with only aileron input! The future looks good for foamys. Wink

Besides replacing the motor, you may want to modify the aileron linkage. The kit supplies you with these long control horns that creat a differential throw between top and bottom. Make a short stubby horn out of zip locks that poke out of the aileron straight back. This just makes it roll truer.
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 188
Location: texas

PostPosted: Tue Oct 19, 2004 5:42 am    Post subject:  

Hey Meyrick- Does the Foame II fly differently then the Pitts s-2c?

Pattern3d - Thats the first Bipe that I was looking at I had just about made my mind up to get it when a guy at a local hobby shop talked be out of it?He said it was to unstable?I sure did like the looks of it!!

_________________
http://www.texomarc.org/
Back to top  
pattern3dflyer



Joined: 13 Oct 2004
Posts: 9

PostPosted: Tue Oct 19, 2004 6:27 am    Post subject:  

Unstable? I don't know what he is talking about unless you want to buy this plane to learn RC.

This thing is point and shoot and not a beginner plane. It is only hands off when you have aligned it perfectly. You need to have flown a plane with little or no dihedral with a semi or semisymetrical wing first and then you're ready.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 650
Location: Fremont, CA

PostPosted: Tue Oct 19, 2004 6:29 am    Post subject:  

Shaun wrote:
Hey Meyrick- Does the Foame II fly differently then the Pitts s-2c?


Yeah, the foameII is insane. Control surfaces are two times bigger than the Pitts so 3D is wild. It uses two aileron servos and the roll rate is twice as fast. But it is also rock solid, harriers are super solid. Parachutes into the wind drops the plane almost straight vertical with no wing rock.

_________________
--Meyrick--
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 188
Location: texas

PostPosted: Tue Oct 19, 2004 7:19 am    Post subject:  

Pattern3d-I have been flying for 10-12 years.
But I haven't had the kahona's to try it on my regular planes.
I told the guy what I was looking for.
He might have interpreted what I told him to that I wanted a stable foamy that is capable of 3-d?
And not as wanting a plane that was to squirrley to learn 3-d on.

What I want is a cheap plane that I can practic 3-d on, and not crash my bigger planes.

I can do 3-d on g-2, but thats not the same Sad.

_________________
http://www.texomarc.org/
Back to top  
pattern3dflyer



Joined: 13 Oct 2004
Posts: 9

PostPosted: Tue Oct 19, 2004 7:07 pm    Post subject:  

Shaun,

Flying 10-12 years! You'll love it! Its perfect for you.

The only negative thing is that with all the cool decals, it is a good looking plane , so you may still not want to dork it in.

The other thing is if its gusty it can get real shakey, but when its calm it's a blast. It will fly in high steady winds with the 370 (10 - 15) mph but you need some space 'cause downwind gets there in a hurry. Luckily there was a tree to catch it for me. Didn't hurt it at all.

There are probably lots of other great foamy bipes out there that are great, but I am just really happy with mine.
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 188
Location: texas

PostPosted: Wed Oct 20, 2004 4:04 am    Post subject:  

Thanks pattern3d-
Trust me I have had my fair share of trees Smile.
I guess I should have been more clear and said that I have been in and out of the hobby for that period of time, But the more that you talk about the plane the more I like the sounds of it.
I'm sure alot of the small planes the size that I'm looking at are going to be a bit shakey with the wind.
It just would be nice to have a plane that I can fly in my back yard and not have to travel all the way to the field.!

_________________
http://www.texomarc.org/
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive