ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

First 3d plane...suggestions?
21 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Tue Nov 23, 2004 8:06 pm    Post subject: First 3d plane...suggestions?  

I want to get into 3d aerobatics and I need help selecting my next plane.

This would be my "second" plane. I've flown trainers in the past and I currently have a Ugly Stick, but I'm still just a beginner with airplanes. I do have, however, a fair bit of experience with heli's, so my thumbs understand inverted flight and rudder control is not a problem. I also fly a CAP 232 Torque Roller ( Zak suggested this to me long ago) on my G2. Still, I've only had a plane in the air two or three times...and that was 3 years ago. I'm way past a beginner on the sim, but I have no real experience with a plane.

I actually haven't flown anything for about 2 years now. (I was finishing up my schooling.) Anyway, I was all ready to get back into heli's, I even bought a new one. While I was waiting for it to show up, I went down to Bayside RC field to hang out, and I saw Zak's dad. We talked for a while, I asked about Zak, and he told me about this site. (VERY cool by the way!!!)

So I'm reading all about how I need a Funtana 90 and how the 90's fly better than the 40's and I'm all ready to buy my first big plane, and my first 4 stroke engine, and I'm looking at bigger cars so that I can fit my new airplane in, etc., ect...!

I got kind'a excited about the whole thing. Luckily I wandered back to Bayside the next weekend and saw Mike West again. He thought that the big plane at this point in my flying career was a bad idea (go figure!), and suggested that I keep my stick/trainer until I can fly the crap out of it. He then proceeded to show me what he meant by borrowing someone's trainer and flying the crap out of it! Shocked

Okay, so after a warm dose of reality, I'm reading to proceed at a modest pace. I would, however, like to move to a mid winged, aerobatic plane soon. (Zak, please don't tell your dad I said this.) I think a 40 sized would be great, since the "pucker factor" would be small, I could use one of my 50 sized heli engines, and I wouldn't need to buy a new car to fit it in! Very Happy

I've looked into the profiles, however I'm not sure that I can get a profile into my car, unless the wings can come off. (I got a little sports car.) I've seen Zak fly the snot out of a Sig something Extra (heavily modified!), so I've looked at this as well. Zak, would you suggest a Something Extra today, considering what else is out there? I've also looked at the U Can Do's, but the people on this site don't seem to like them much. Any other suggestions?

Thank you for the help...sorry about the book!
Michael
Back to top  
Flatlandmike



Joined: 29 Oct 2004
Posts: 22

PostPosted: Tue Nov 23, 2004 8:43 pm    Post subject:  

funtana 40 there cheaper now i get them at 155 new at the lhs and as long as you keep the rates low or just modest you wont have probs with it they will break but there dam good planes

get to where you can throw that trainer in every direction with oput losing orintation and land lightly then the funtana on low rates would be no prob



funtana-in-the-corner.jpg
 Description:
 Filesize:  89.92 KB
 Viewed:  375 Time(s)

funtana-in-the-corner.jpg


Back to top  
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Tue Nov 23, 2004 9:12 pm    Post subject:  

FlatLandMike,

I've been looking at the Funtana...It seems like this is the one to get, however I'm worried about it's frailty. There seems to be a lot of broken wings and torn off landing gears out there with this plane.

Also, It seems that everyone suggests the 90 Funtana over the 40. Does the 40 fly well, or is it that the 90 is just that much better?

Is it sacrilegious to hang a 2 stroke on the end of a Funtana? They are such beautiful planes!

Thank's for the help!
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Tue Nov 23, 2004 9:54 pm    Post subject:  

Well, after having the 40 and the 90, the 90 does fly better. I thought the 40 to be too squirrely, and shyed away from suggesting it as a first 3D plane, but the people that did get it to learn 3D on seemed to like it. A profile is also a good plane if you can get it in your sports car Razz Biggest thing ive come to realize, is you should fly ANYTHING you have. If you need to get somethin to fly, then you can make a choice, but dont get in over your head. Most people will get a plane thats more than they can handle cause it will be "good in the future" well, they usually dont last that long.

Ok thats my schpiel.

_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Flatlandmike



Joined: 29 Oct 2004
Posts: 22

PostPosted: Tue Nov 23, 2004 10:03 pm    Post subject:  

well the landing gear will come off if you sneeze on it but it goes back in with a smig of epoxi and 5 minutes and i think half the pooeple i know have little 2 strokes in them but im runnin a ys 63 that just ripps this plane around between 46 and 91 2 strokes use a 2 stroke if you need to no worries and i bet theres some one selling these every where i have bout 2 of them for a spare but have resold them as i havent beaten this one up at alli thonk i got them for 50 or so bucks a piece if your gonna beat up the plane a bit the extreme flight 540 profile will take more abuse a lot more i have landed inverted with my funtana and the only damge was a broken needle was doing a little rudder draggin Rolling Eyes and let it get to flat and slow i havwe the 90 in a box but decided to trade it for a rx for my 28% extra
_________________
www.lmacky.org
Back to top  
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Tue Nov 23, 2004 10:22 pm    Post subject:  

Thanks Zak, and FlatLandMike.


Zak, how did that old Something Extra fly for you? I remember you made a barn door sized rudder for it! I've read that this plane is not really considered 3d worthy. What are your thoughts. The kit is pretty cheap!

Why is no one into the UCD? I've read where several people were dumping them for the Funtana. I'd just like to know.


I will probably get the 40 Funtana...but I'm going to wring the old Stick out for a while...just to honor Mike West. He's going to need to give me flying lessons though...

Michael
Back to top  
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Tue Nov 23, 2004 10:52 pm    Post subject:  

Whoa! I've spawned!
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Tue Nov 23, 2004 10:56 pm    Post subject:  

skwarwheels wrote:
Whoa! I've spawned!


I cleaned it up for you.

The UCD is a good Torque rolling and hovering plane, but does not perform other 3D maneuvers that well like elevators, harriers, blenders etc. You would have to add spoileron mixing to get them going somehow.

_________________
--Meyrick--
Back to top  
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Tue Nov 23, 2004 11:04 pm    Post subject:  

I LOVE this site!


Thanks for all the help!

Is there an order to which maneuvers to practice first? Actually...is there a list of all the maneuvers that can be performed?

Man...I'm really a Noob!

Michael
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Wed Nov 24, 2004 9:46 am    Post subject:  

skwarwheels wrote:

Is there an order to which maneuvers to practice first? Actually...is there a list of all the maneuvers that can be performed?

Michael


Usually people start out with hovering. But here's a list from Mike McConville

http://www.horizonhobby.com/Explore/Article.aspx?ArticleID=1022

http://www.horizonhobby.com/Explore/Article.aspx?ArticleID=1033

_________________
--Meyrick--
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Wed Nov 24, 2004 12:56 pm    Post subject:  

skwarwheels wrote:
Thanks Zak, and FlatLandMike.


Zak, how did that old Something Extra fly for you? I remember you made a barn door sized rudder for it! I've read that this plane is not really considered 3d worthy. What are your thoughts.


I liked my second one. It flew alright, could have use a better engine. The plane flies nice though, not quite as radical as some other things, but a nice plane none the less.

_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 122
Location: Kalamazoo, MI

PostPosted: Wed Nov 24, 2004 6:06 pm    Post subject:  

I'm very partial to the Tower Hobbies Uproar. I just ordered my third and should be here soon. It will do what ever you want with a Thunder Tiger .46 Pro. You do have to tweak the kit slightly to make it perform the best, but at $40, you can't loose. This plane will slow to a crawl, mid thottle will sport fly around the sky and wide open will tail touch with enough to pull out. I can also tell you what I know to modify it. No pucker factor Cool
_________________
God bless us all, and keep us safe.
Back to top  
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Wed Nov 24, 2004 9:36 pm    Post subject:  

Thanks guys!

Zak, could you elaborate on what you modified on the Sig.

Radioflyer, I'd like to know what you've done to your Uproars. I'm shying away from it b/c of it's semi sym wing, though...


I'm trying to figure out how I could fit a profile in my car (maybe some of it can hand out the window... Very Happy ) If I put the profiles back into the possible choices, then what would you suggest.

Aaauugghhh! I'm ANALizing this way too much!!! Hehe!

Michael
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Wed Nov 24, 2004 11:34 pm    Post subject:  

Biggest thing i did on the SE was lighten it. It was very hollowed out to keep it light. I aslo cut the stab down, and built new elevators that were bigger with a CB. Also did this on the rudder.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Thu Nov 25, 2004 12:14 am    Post subject:  

Thanks Zak!

I just went out and did some serious measuring of my automobile (...in the dark, I might add!)

After much deliberating...and three sheets of graph paper...I'm pretty convinced that I can get a profile into my car.

The only problem is that I would have to run along side of it until I got to the airfield!!! Laughing


Have a happy T-day Everybody!

Michael
Back to top  
Rcflyer



Joined: 01 Jul 2004
Posts: 65

PostPosted: Thu Nov 25, 2004 12:02 pm    Post subject:  

Hey i am pretty new to 3d like you I have a funtana 90 right now but I know you are looking for something smaller so if you doin't mind going into electric, Here yesterday morning I recieved a profile yak 55sp-e arf from toddsmodel website its ultralight you can order just the plane only for $100.00 are the plane motor,gearbox, and speed controler for $200.00 all you need is 4 moicro servious a battary pack (1320 3 cell) and a micro reciever and you are off! the wings seprate and it comes with a carrying box for easy transport anywhere! backyard,schoolyard, are a gym you name it! I havit flown it yet becasue I still got to get the charger (this is my first electric plane) and the radio equiment.

Just thought I would throw that out there to give you another idea.

and heres teh link www.toddsmodels.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 672
Location: Sunnyvale, CA

PostPosted: Thu Nov 25, 2004 12:07 pm    Post subject:  

Know what i hate...when people post links to cool planes... Razz Laughing NOW I WANT ONE!!!! Surprised
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 121
Location: Kalamazoo, MI

PostPosted: Sat Nov 27, 2004 2:10 pm    Post subject:  

Skwarwheels, sorry it took so long to get back with you. My first was stock. The second, which I flew for at least 6 years, had little things done over time.
First I added winglets or gates to the tips. They were about 3"x 8". This made the plane track much more straight,IMP. I will be doing this again but in a little different configuration. Next, I ripped the tail feathers off and added counterbalances to both rudder and elevator. ( see pic.) At that point I beveled both sides of the surfaces. After that I sqaured up the inboard ailerons. This was VERY effective and I highly recomend it. In a hover the roll rate was mushy and after it was responsive. I added a 12.75x 3.25 to the TG .46 and it would hover and pull out great. This was after 3 crashes and repairs that I know added much more weight than first flight. As for the semi symetrical wing, I think it adds to the stablity at slow flight. I would recomend this as a second plane to anyone because of its extensive training range. I also used to transport it in the back of a Ford tempo 4 door with no problems.
I might try to make the ribs symetrical on this next on just to see how it does. A touch of down was needed when inverted but it would do outside waterfalls with no problem. I hope this helps Rolling Eyes



IMG_0600.jpg
 Description:
 Filesize:  30.32 KB
 Viewed:  103 Time(s)

IMG_0600.jpg



_________________
God bless us all, and keep us safe.
Back to top  
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Fri Dec 03, 2004 7:46 am    Post subject:  

Hi guys!

I was gone for the holiday, and the site was down for a bit, but thank you for responding!

Radioflyer, thank you for replying with your modifications for the Uproar. I will keep them in mind for my next plane. I saw that the Uproar is now 59 bucks or so, which put's it into the price of some highly praised profile kits as well. Any thoughts out there as to how the profiles fly? Would a Burrito or a OMP yak be a good second plane?

Rcflyer, it's funny that you mentioned the profile yak 55sp-e arf from toddsmodel, because I ran across that plane a few days ago myself.

A few posts ago, Zak mentioned that the main goal is to fly anything that you have. I took that to mean you should be flying alot! I've never looked that seriously at the foamies (or the yak 55sp-e), but I can see where I would be able to get some daily stick time with one of these.

Kinda changed my thinking... The Yak deal for 200 bucks seems like a winner. Is this true?

Thanks for all the help everyone!!!
Michael

ps...Zak, that's not how you spell "schpiel"...hehe!
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 121
Location: Kalamazoo, MI

PostPosted: Fri Dec 03, 2004 2:19 pm    Post subject:  

I thought I wouldn't like my profile(TG G-200) but I love it. Keep in mind that if you don't have alot of stick time a tail heavy plane for 3D isn't the most stable in the world. My profile rocks side to side alot when I come in to land. IMO, a foamy, like the Foamtana, would be a great way to go. It's an investment that you won't regret. It cost alot at first but after that it's not to bad Very Happy
_________________
God bless us all, and keep us safe.
Back to top  
JR.Master



Joined: 07 Nov 2004
Posts: 57
Location: San Angelo

PostPosted: Mon Dec 06, 2004 5:12 pm    Post subject:  

Okay not being rude or anything but i'm 14 and my second plane well i'm still flying it but anyways to me a 3d plane would be a good 3rd plane that's why i've gone from my greatplanes extra 300 40 to a Lanier Staudcher S600 31.5% and they say it is 3d capable but on G2 it took me a good 2 years to get flying like Chip Hyde. So i would suggest the greatplanes extra 300 .40 size it will do dead stick flat spins. snap rolls on take off but i would recomend stabilizers for the tail or it will rip the elevator off. It will provide plenty of power with a 4 stroke i don't know what size but i have a 2 stroke webra 50 on it and it provides plenty of power and the best part it lands like a low wing tail dragger and like a demon in the sky but i hope you have a computer radio to do dual ratings cause you'll need it when you start.
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive