| |
| Author |
Message |
JR.Master

Joined: 07 Nov 2004 Posts: 57 Location: San Angelo
|
Posted: Thu Dec 02, 2004 7:40 pm Post subject: I NEED HELP ON DECIDEING WHAT SIZE ENGINE I NEED AND PROP! |
|
|
| HI guys i was just seeing what size engine and prop i need for a Lanier rc Staudcher S600 i want pleny of power for 3d i t recomends a 3.2 to 5.0 cubic inch. the plane is to weigh 20-25 pounds ,if you have any suggestions could you help me out. Ohh yes if you have a engine and a prop that would fir the plane I could be interested only if in my price range. Remember i want planty of power so any engine closest to 5.0 cubic inch and a prop like ex. ??x4 anything that can easily hang on the prop. |
|
| Back to top |
|
 |
Tom Uhlendorf

Joined: 18 Sep 2004 Posts: 345 Location: Morgan Hill, CA
|
Posted: Thu Dec 02, 2004 8:27 pm Post subject: |
|
|
Good luck finding a xyx4 prop that size. For an engine I would get the ZDZ 80, DA 100, or 3W 75. I don't know the size props though. But go and find the prop range for the engine you want, and lets say it is a 22x12 to a 26x12. Go with a 24x8 or 10, or a 26x10 or 8. And for 3d, use menz props. You are looking for the biggest diameter props with the lowest amount of pitch, but without bogging the engine down or over reving it at the same time.
Hopes this helps.
-Tom _________________ Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!) |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 866 Location: Fremont, CA
|
Posted: Thu Dec 02, 2004 9:50 pm Post subject: |
|
|
ZDZ80RV is probably your best choice, it's cheap and powerful and get a 26x10 Menz prop for it. _________________ --Meyrick-- |
|
| Back to top |
|
 |
Radioflyer

Joined: 14 Sep 2004 Posts: 121 Location: Kalamazoo, MI
|
Posted: Fri Dec 03, 2004 2:07 pm Post subject: |
|
|
For any Lanier plane get a V8(or a 6 will do) in a truck of any sort and drive over it. This will save you from any future problems. I'm kidding, I have not had good luck with Lanier and have heard stories the same. Good-luck though, the bigger planes may be better quality  _________________ God bless us all, and keep us safe. |
|
| Back to top |
|
 |
3Dfanatic
Joined: 15 Apr 2004 Posts: 278 Location: Tacoma(area), WA
|
Posted: Fri Dec 03, 2004 7:29 pm Post subject: |
|
|
It's not gonna take THAT much power. A 4-banger truck would do just fine  _________________ -Aaron
cutimages.com
offthewallrc.com |
|
| Back to top |
|
 |
N81U

Joined: 09 Aug 2004 Posts: 93 Location: Goodyear AZ
|
Posted: Fri Dec 03, 2004 9:20 pm Post subject: |
|
|
Use a DA 100 with a 27x 10 MenzS if you can find one, Mezlick of the same size will do great also
Lee |
|
| Back to top |
|
 |
| |