ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

I need help picking a motor/controller please...
16 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Wed Dec 15, 2004 12:03 am    Post subject: I need help picking a motor/controller please...  

Hi guys,

I'm ready to take the plunge into foamys, and since I've been a good boy this year, I've decided to ask santa for a motor and a controller Very Happy

Problem is that Santa doesn't have a clue as to which motor to deliver down the chimney...and I'm not really that sure either.

I've seen people recommend the AXI 2212/34 b/c you don't need a gearbox, and I've seen people recommend the Hacker B20-15L, or the HiMax HA2015-4100 b/c they can deliver 25+ oz's or thrust (wow!)

It seems that a Castle Creations Phoenix 25 brushless controller would take care of the controlling part of most applications...

Anyway, I could use some help before Santa ends up getting me a sweater or something. I'm telling you fella's...it wouldn't be the same! Shocked

Thanks!
Michael
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 685
Location: Sunnyvale, CA

PostPosted: Wed Dec 15, 2004 5:51 pm    Post subject:  

I would definetly go with the AXI. Why, because its QUIET, light, and VERY efficient, about 83% in fact.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Wed Dec 15, 2004 7:39 pm    Post subject:  

Definitely the Axi 221234 with a PHX25. It's an awesome combo.
_________________
--Meyrick--
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 123
Location: Fremont, Ca

PostPosted: Thu Dec 16, 2004 12:03 am    Post subject:  

What they said. Very Happy I'm going to be getting that combo soon.
_________________
Lower??!!
Back to top  
N81U



Joined: 09 Aug 2004
Posts: 96
Location: Goodyear AZ

PostPosted: Thu Dec 16, 2004 9:56 am    Post subject:  

This is the combo I use for my FoamtanaS, it works great, lots of thrust for 11 amps. But for the same price at 14 to 17 amps and even more thrust you could go for the Hacker A20-22L out runner. I got one yesterday for the Bipe I am developing, it made the FoamtanaS ballistic.

Lee



P1010011.jpg
 Description:
 Filesize:  58.17 KB
 Viewed:  202 Time(s)

P1010011.jpg


Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Thu Dec 16, 2004 10:13 am    Post subject:  

N81U wrote:
This is the combo I use for my FoamtanaS, it works great, lots of thrust for 11 amps. But for the same price at 14 to 17 amps and even more thrust you could go for the Hacker A20-22L out runner. I got one yesterday for the Bipe I am developing, it made the FoamtanaS ballistic.

Lee


Looks cool, what's the price on those Hacker Outrunners?

_________________
--Meyrick--
Back to top  
N81U



Joined: 09 Aug 2004
Posts: 96
Location: Goodyear AZ

PostPosted: Thu Dec 16, 2004 12:18 pm    Post subject:  

Meyrick

Retail is $92.99 on the A20-22L and it is not the only size they have http://www.hackerbrushless.com/motors_a20.shtml.

Do not quote me on this but http://www.darrolcady.com/ is working on getting them in stock, and think a motor and Controller will go for under $130.00 Very Happy

Lee


Last edited by N81U on Thu Dec 16, 2004 12:22 pm; edited 1 time in total
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Thu Dec 16, 2004 12:21 pm    Post subject:  

N81U wrote:
Meyrick

Retail is $92.99 on the A20-22L. Do not quote me on this but http://www.darrolcady.com/ is working on getting them in stock, and think a motor and Controller will go for under $130.00

Lee


What size prop does it swing and how much thrust? Let us know if you work out a deal and get them in stock.

_________________
--Meyrick--
Back to top  
N81U



Joined: 09 Aug 2004
Posts: 96
Location: Goodyear AZ

PostPosted: Thu Dec 16, 2004 12:30 pm    Post subject:  

Hacker recommends 10x4.7 SF or 11x3.8 SF. It was like 7000RPM with the 11x3.8. I don’t know what the thrust is but it was more than Axi 2212/34 probably 8 to 12 OZ more thrust.

Lee
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Thu Dec 16, 2004 12:59 pm    Post subject:  

Hmmm, the Axi swings a 12x6 prop and probably with 30oz thrust.
_________________
--Meyrick--
Back to top  
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Thu Dec 16, 2004 7:49 pm    Post subject:  

Thanks to all the responses!!!


I must admit that I don't quite have an understanding of the whole electric thing. Please correct me...

If you have a motor and a certain prop, the motor uses "x" amount of amps. Switch to a prop that takes a bigger cut of air, and the amps go up. Right?

This is where I get lost... A battery has a max discharge rate (say of 10C). If you you have a 1500mah battery, should you keep the discharge under 15 amps? If you got with the n81u suggested, at 17-19 amps, do you need a different battery setup. I notice that most 10-12 amp setups use a 3s setup, where the 17-20 amp setups use 3s2p setups.

uhmmm....basically I don't have any idea what I'm doing. This mean's I'll probably be selling some pretty new equipment in the next few weeks...right after I accidentally blow myself up! Wink

Michael
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Thu Dec 16, 2004 10:24 pm    Post subject:  

skwarwheels wrote:
Thanks to all the responses!!!
This is where I get lost... A battery has a max discharge rate (say of 10C). If you you have a 1500mah battery, should you keep the discharge under 15 amps? If you got with the n81u suggested, at 17-19 amps, do you need a different battery setup. I notice that most 10-12 amp setups use a 3s setup, where the 17-20 amp setups use 3s2p setups.
Michael


Don't worry about the amps. Most of your flying will be under 10 amps. Also batteries have burst amps that could last a few seconds. With this setup, just get a battery that is 1200/1320mah with a 12~14C discharge rate like the Thunderpowers and you'll be fine.

_________________
--Meyrick--
Back to top  
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Fri Dec 17, 2004 8:22 am    Post subject:  

Meyrick wrote:

Quote:
With this setup, just get a battery that is 1200/1320mah with a 12~14C discharge rate like the Thunderpowers and you'll be fine.



Thanks Meyrick. I'm assuming you meant the AXI motors when you said "with this setup". Would you do the same battery setup if you go with the high amp Hacker motor?

Does anyone use the AXI 2212/26? One thing I notice is that motor comparision charts don't seem to compare "apples" to "apples". Looking at the chart on Chris' 3D foamy site, the AXI 2212/34 is charted with two different props using a 3s1p pack. The next motor is the AXI 2212/26, however it is charted using a 2s1p pack.

Is this to show that you can get simular thrust with a lighter setup? I just end up wondering what kind of pull I would get if I were to use the 3s1p pack. It would seem that the AXI 2212/26 would be a stronger motor than the AXI 2212/34 on the same 3s1p pack, it's simularly priced, and therefor would be a better choice. The concern is that I don't see anyone using this setup, and none of the motor charts have it charted that way? Clearly I'm missing something.

It's all kinda frustrating to a Supernoobian like me...
Michael
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Fri Dec 17, 2004 8:30 am    Post subject:  

skwarwheels wrote:
Meyrick wrote:

Quote:
With this setup, just get a battery that is 1200/1320mah with a 12~14C discharge rate like the Thunderpowers and you'll be fine.


Thanks Meyrick. I'm assuming you meant the AXI motors when you said "with this setup". Would you do the same battery setup if you go with the high amp Hacker motor?
Michael


I use a 3cell 1320 and a 3cell 1200 on both an AXI 22/12/34 and Himax 4100. I don't have experiences with Hackers.

_________________
--Meyrick--
Back to top  
Jairzinho



Joined: 28 Dec 2004
Posts: 2
Location: Costa Rica

PostPosted: Tue Dec 28, 2004 4:20 pm    Post subject:  

what is the diff between Axi 2208/34 and 2212/34? Embarassed

Im trying to understand all this electric world, but, where can i find a good guide?

Thanxs a lot guys

Regards

Jairzinho

_________________
Pura Vida, Costa Rica
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 871
Location: Fremont, CA

PostPosted: Tue Dec 28, 2004 4:44 pm    Post subject:  

Jairzinho wrote:
what is the diff between Axi 2208/34 and 2212/34? Embarassed

Im trying to understand all this electric world, but, where can i find a good guide?

Thanxs a lot guys

Regards

Jairzinho


The 220834 is a smaller motor designed to 3D 7~10oz. planes. The 221234 is designed to 3D 12~15oz. planes

_________________
--Meyrick--
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive