ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Zak's Foamtana....
17 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
Ramz



Joined: 05 Nov 2004
Posts: 30
Location: New Brunswick, Canada

PostPosted: Fri Dec 17, 2004 12:52 pm    Post subject: Zak's Foamtana....  

Hey Zak. I loved your Foamtana video! That was some fantastic flyin! I've got a few questions for you...How much does Lee charge for the Foamtana? How much did yours weigh? What prop did you use? If you were going to build another one would you do anything different? How does it compare to a superstar shocky with a similar setup? I really like how it flies and i'm thinking of getting one. Thanks.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Fri Dec 17, 2004 4:05 pm    Post subject:  

Lee's prices can be found here. www.darrolcady.com
_________________
--Meyrick--
Back to top  
Ramz



Joined: 05 Nov 2004
Posts: 30
Location: New Brunswick, Canada

PostPosted: Fri Dec 17, 2004 7:48 pm    Post subject: .  

Thanks Meyrick. Much appreciated.
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 685
Location: Sunnyvale, CA

PostPosted: Fri Dec 17, 2004 10:37 pm    Post subject: Re: Zak's Foamtana....  

Ramz wrote:
Hey Zak. I loved your Foamtana video! That was some fantastic flyin! I've got a few questions for you...How much does Lee charge for the Foamtana? How much did yours weigh? What prop did you use? If you were going to build another one would you do anything different? How does it compare to a superstar shocky with a similar setup? I really like how it flies and i'm thinking of getting one. Thanks.


Thanks Ramz. Mine weighed about 14 oz rtf, and i was running a GWS 12x8 prop. I would do better aileron pushrods on my next one, and some actual hinges on the ailerons. Other than that, i wouldnt change a thing. The shock flyer is a much different plane. The shockys are a lot smaller and lighter, and are a bit wilder. The Foamtana is really the more like a 40% compared to other foamies. It is a lot bigger, and flies that way, but is still very maneuverable.

Hope this helps

_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Ramz



Joined: 05 Nov 2004
Posts: 30
Location: New Brunswick, Canada

PostPosted: Sat Dec 18, 2004 8:14 am    Post subject: ...  

Thanks Zak. I ordered one yesterday so it'll be here soon hopefully. I'm gonna run the AXI 2212/34 but i'm gonna try a 730 3 cell thunder power before i invest in a 1320. Also, what kind of prop adapter were you using with your axi? the one with that comes the the motor mounting kit? Did you have to modify the prop to make it fit?
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Sat Dec 18, 2004 8:45 am    Post subject: Re: ...  

Ramz wrote:
Thanks Zak. I ordered one yesterday so it'll be here soon hopefully. I'm gonna run the AXI 2212/34 but i'm gonna try a 730 3 cell thunder power before i invest in a 1320. Also, what kind of prop adapter were you using with your axi? the one with that comes the the motor mounting kit? Did you have to modify the prop to make it fit?


The 730mah will work fine but will only last about 5~7 minutes. The prop adapter that comes with the mounting kit is what we use. You will have to drill out the hole on the GWS props a little bigger to fit. Also make sure you get the PHX25 speed controller. You will have a blast.

_________________
--Meyrick--
Back to top  
Ramz



Joined: 05 Nov 2004
Posts: 30
Location: New Brunswick, Canada

PostPosted: Sat Dec 18, 2004 1:05 pm    Post subject: Re: ...  

Meyrick wrote:


The 730mah will work fine but will only last about 5~7 minutes. The prop adapter that comes with the mounting kit is what we use. You will have to drill out the hole on the GWS props a little bigger to fit. Also make sure you get the PHX25 speed controller. You will have a blast.


Yeah that's what i figured. I get about 10-12 mins of flight time on my shocky with the 730 3 cell and my club has a 8 minute flight time rule anyways. For outdoors i'll probably end up getting a 1320, maybe even 2 depending on how things go. I planned on getting the 25 amp phoenix as my tsunami 10 wouldn't cut it. Thanks for all the help guys. Much appreciated. I may post some pics when i get it done.
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 270
Location: Toronto, Canada

PostPosted: Sat Dec 18, 2004 2:16 pm    Post subject:  

Everyone here on their 2212/34's r running pheonix 10's but to be safe i would go with the 25
_________________
-Chris-
3D Foamy
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Sat Dec 18, 2004 3:14 pm    Post subject:  

Chris wrote:
Everyone here on their 2212/34's r running pheonix 10's but to be safe i would go with the 25


I used to run PHX10 on my Himax 4100s. But I've burnt out 2 of them already. I did have many many flights on them though.

_________________
--Meyrick--
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 685
Location: Sunnyvale, CA

PostPosted: Sat Dec 18, 2004 4:07 pm    Post subject:  

They should never burn out.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Sat Dec 18, 2004 4:58 pm    Post subject:  

3dbatixkid wrote:
They should never burn out.


I had "TWO" that did. I even tried to program it and will not recognize.

_________________
--Meyrick--
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 279
Location: Tacoma(area), WA

PostPosted: Sat Dec 18, 2004 5:16 pm    Post subject:  

8 minute flight rule? How lame Surprised
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 685
Location: Sunnyvale, CA

PostPosted: Sat Dec 18, 2004 6:30 pm    Post subject:  

Meyrick wrote:
3dbatixkid wrote:
They should never burn out.


I had "TWO" that did. I even tried to program it and will not recognize.


They died cause you were pullin 30 amps through the poor things...

_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 122
Location: Kalamazoo, MI

PostPosted: Sat Dec 18, 2004 7:43 pm    Post subject:  

I'm really in the dark about what ya'll are talking about. I know Amps and I know about burning stuff up ( cars mostly ) I would love to get a Foamtana in the future or maybe Lee's new Shark Bipe but I'm not sure what I need to make it go. What is the best stuff to throw in this thing to make it reliable and as lite as possible. I run Futaba stuff so I have to ask- what receiver, servos, battery,do you use BEC, favorite charger for your LiPo, and what LiPo batt. to use Question I'd prefer to get in to this with the best stuff once, and not make mistakes with my purchases. I wasn't sure if I should start a new thread asking these questions or if there was already a thread explaining my questions. If there isn't can someone start a thread on electric set-ups including size(weight), power, prop(size and make), batt. needed and size of servos or torque. I know alot of guys have personal likes and dislikes so the more preferences the better Very Happy
_________________
God bless us all, and keep us safe.
Back to top  
Ramz



Joined: 05 Nov 2004
Posts: 30
Location: New Brunswick, Canada

PostPosted: Sun Dec 19, 2004 11:28 am    Post subject: Flight times..  

3Dfanatic wrote:
8 minute flight rule? How lame Surprised


The reason we have this rule is becuase if we didn't, then there would be many guys who whould never get a chance to fly. My shocky will fly for about 15 mins or 20 if i'm takin it easy. We've only got the gym for 2 hours and with the amount of people flyin we have to limit the flight times so everybody can get a turn. Yeah it kinda sucks...especially when your just gettin warmed up.
Back to top  
Jynx13



Joined: 06 Jan 2005
Posts: 15

PostPosted: Thu Jan 06, 2005 7:26 pm    Post subject:  

Hey Zak.
Did you have to use servo arm extensions on the hs 55's?

Thanks
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Thu Jan 06, 2005 10:16 pm    Post subject:  

I used Hs56s on this plane. And no, i havent extended the arms. The wood control horns that Lee provides in the kit are very well set up, and allow for lots of throw.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive