ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

BME 30% Edge 540
23 of 83 posts archived
 
   3DBatix Forum Index -> Workshop
 
Author Message
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sat Dec 25, 2004 6:00 pm    Post subject: BME 30% Edge 540  

An awsome plane that im hoping to have done soon next week.. even though i won't be able to fly it.. The only thing i wasn't impressed with was thier choice of mounting the wing. They have the set screw on the bottom of the wing so you ahve to flip it over every time.. im gonna change it though. Overall its a really nice plane and i have no complaints about the covering! So far i have done all of the hinging, glued the spar holder inside the fuse, wheel pants and landing gear, and made a big long list of stuff to buy with my christmas money laughing i'll keep you updated on this plane!
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sat Dec 25, 2004 6:01 pm    Post subject:  

oops, meyrick i accedentally made two of the same topic laughing
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sat Dec 25, 2004 6:47 pm    Post subject:  

No problem, took care of it. big grin Show us some pics of that bad boy.
_________________
--Meyrick--
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sat Dec 25, 2004 9:05 pm    Post subject:  

i will if there is any way that i can make the picture smaller with out losing any of the picture because my pictures are close pictures and take up the whole frame.. is there any way to make them smaller?
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sun Dec 26, 2004 8:03 am    Post subject:  

TeamMoki3D wrote:
i will if there is any way that i can make the picture smaller with out losing any of the picture because my pictures are close pictures and take up the whole frame.. is there any way to make them smaller?


Yeah, you need a photo editor. Make the size 640x480. You can download a bunch of editors here.
http://www.snapfiles.com/Freeware/gmm/fwgraphicedit.html

_________________
--Meyrick--
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Dec 26, 2004 5:51 pm    Post subject:  

thanks, in my next post i will have tons of pics! smile
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Mon Dec 27, 2004 8:49 pm    Post subject:  

Well, the pics didn't quite work out but heres my setup..
Setup:

Engine- Moki 2.10 (Bisson Large Volume Pitts Muffler)
Servos- Hitec 645MG's(4) JR 8611(1) Hitec 605BB(1)
Battery- 1800 Mah NiCad JR pack (4 cell)
Weight- (+-) 16 pounds
Prop- Bambula 20x8 wood
Transmitter- Futaba 9C
Reciever- 9 Channel PCM
Accesories- Cermark and Expert
Changed the stab from bolt on to epoxy on laughing
Changed the wings from drill through the wing tube to some inserts and a 10-32 bolt

Meyrick, maybe I could email the pics to you and you could size them down? Or too much trouble?

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C


Last edited by Butthead on Fri Dec 31, 2004 3:51 pm; edited 1 time in total
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Mon Dec 27, 2004 8:51 pm    Post subject:  

TeamMoki3D wrote:

Meyrick, maybe I could email the pics to you and you could size them down? Or too much trouble?


Go ahead email them to me.

_________________
--Meyrick--
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Tue Dec 28, 2004 1:28 pm    Post subject:  

Isn't 18 pounds way heavy for only a 2.10?
_________________
Lower??!!


Last edited by 3D-kid330 on Tue Dec 28, 2004 3:49 pm; edited 1 time in total
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Tue Dec 28, 2004 2:16 pm    Post subject:  

3D-kid330 wrote:
Isn't 18 pounds heavy for only a 2.10?


Hmm, didn't even realize that. I know Zak's 15lbs DP Extra had barely enough vetical. Soucy, maybe time to think about a DA50?

_________________
--Meyrick--
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Tue Dec 28, 2004 3:47 pm    Post subject:  

or a 60cc, what is 2.1 in cc
_________________
-Chris-
3D Foamy
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Tue Dec 28, 2004 3:49 pm    Post subject:  

Ditto that.

Its gonna be way lagging in the uplines and pullout if it comes to 18 lbs.
But then the wing loading will get higer with a DA since it's heavier, right?

_________________
Lower??!!
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Tue Dec 28, 2004 3:49 pm    Post subject:  

well, there is a way that i can get a g62.. Idea
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Tue Dec 28, 2004 3:52 pm    Post subject:  

my hangar 9 cap 232 27% weighs 17.67 pounds and it has enough power to do a tail slide then go straight up.. and beleive me, i wont be doing the same stuff you guys are.. at least not as low!
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Tue Dec 28, 2004 3:52 pm    Post subject:  

2.1 is 35ccm, in other words it probably wont pull it with authority. A Zenoah, has enough power but I think they are heavy?
_________________
Lower??!!
Back to top  
60 posts here were not archived
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Tue Jan 18, 2005 7:05 am    Post subject:  

Looks awesome. Any way to get video once you get it in the air?
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Tue Jan 18, 2005 5:18 pm    Post subject:  

well, there is a photographer that flys at our field.. but i dont know if he takes video or just still pics. if i fiund out then ill try to get some footage. otherwise, ill just have pics of it flying. yhou guys might have to wait about 4 months though, it got down to -3 this morning! frown
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sat Apr 16, 2005 2:10 pm    Post subject:  

got the motor broken in today and im goin flying tomorow big grin big grin Cool Cool cant wait! also made all the surfaces have about another inch of throw embarrassment . gonna be awesome. tomorow ill give a flight report and some pics of it flying.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Mon Apr 18, 2005 3:13 pm    Post subject:  

well, sunday wasn't the best flying day. i took my edge up for its maiden and it all seemed well. but i did a kinda low pass and the moki all of a sudden quit on me. i tried to bring it down on our auxillary strip, but it hit pretty hard. the gear were ripped off and the bottom of the fuse is all thrashed up and stuff. its fixable but it still sucks.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
JR.Master



Joined: 07 Nov 2004
Posts: 462
Location: San Angelo

PostPosted: Mon Apr 18, 2005 5:35 pm    Post subject:  

Hey show some pictures of it all scuffed up and all man.
_________________
Did I do that? Hummmmmm!Yep, sure did!
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Mon Apr 18, 2005 8:50 pm    Post subject:  

Sorry to hear about that though. But whats with Moki's and overheating? Mine was in the ground like 5 times before Zak replaced the bearings for me and I put the fuel reg on and it was fine. Could it have been that the cowl cooling was insufficient or the Moki was just too lean? Mine is picky about where the settings are, because it likes it really rich or it will start heating up and leaning out. (Or maybe it's my cowl cooling?)

Sorry to hear about that, hope you can get it flying again soon.

_________________
Lower??!!
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Tue Apr 19, 2005 3:37 am    Post subject:  

that sucks...make sure the air can get into the cowl easily and flow out it easily aswell.
_________________
-Chris-
3D Foamy
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Tue Apr 19, 2005 3:48 am    Post subject:  

3D-kid330 wrote:
Sorry to hear about that though. But whats with Moki's and overheating? Mine was in the ground like 5 times before Zak replaced the bearings for me and I put the fuel reg on and it was fine. Could it have been that the cowl cooling was insufficient or the Moki was just too lean? Mine is picky about where the settings are, because it likes it really rich or it will start heating up and leaning out. (Or maybe it's my cowl cooling?)

Sorry to hear about that, hope you can get it flying again soon.

yes, that's ectually what it was. the cowl on an edge is VERY tight and i tried to cut as much away without making it look rediculas. what we are going to do is re-mount the moki inverted and cut away the bottom of the cowl since it's all scratched and torn up.

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
 
   3DBatix Forum Index -> Workshop All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive