ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Quique Yak 54 72"
11 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Fredy



Joined: 25 Jul 2004
Posts: 45

PostPosted: Tue Dec 28, 2004 9:22 pm    Post subject: Quique Yak 54 72"  

anyone gotten the qq yak 54 72" yet?
_________________
I would pay a monthly fee for a 24hr daily "R/C Channel" that can show in Mexico.
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 28
Location: North Carolina

PostPosted: Tue Dec 28, 2004 10:12 pm    Post subject:  

They are real nice. If you are thinking about getting one I would go for it.
_________________
Ryan Smith
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 924
Location: Fremont, CA

PostPosted: Tue Dec 28, 2004 10:26 pm    Post subject:  

I guess you gotta get it with the YS140. That's $900 right there for a 72" wingspan plane.
_________________
--Meyrick--
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 28
Location: North Carolina

PostPosted: Tue Dec 28, 2004 10:59 pm    Post subject:  

You don't HAVE to get the YS, its just a good combo.

Just use your common sense and you won't have any trouble. There are plenty of good engines that can be used in this airplane. YS 140 series, Webra 145, Webra 160, OS 140, OS 160, ST 2300, or if you like electrics, you can convert it.

Quique is a good friend of mine and I have seen this airplane in development for a long time. If you do what he says, then there shouldn't be any problems. I know some people are having difficulties with the landing gear plate pulling out, but that's about it.

One of my pattern buddies has offered me a killer deal on a NIB OS 1.40 EFI with an extra injector that I just might get and put in a Yak.

_________________
Ryan Smith
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 28
Location: North Carolina

PostPosted: Tue Dec 28, 2004 11:00 pm    Post subject:  

Hmm...

Double post. Sorry fellas. Cool

_________________
Ryan Smith
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 924
Location: Fremont, CA

PostPosted: Tue Dec 28, 2004 11:48 pm    Post subject:  

What is AUW? I guess the OS160 would be a good choice if you can get it down to 12lbs or less.
_________________
--Meyrick--
Back to top  
jebrando



Joined: 23 Nov 2004
Posts: 4

PostPosted: Wed Dec 29, 2004 4:54 am    Post subject: I got one  

Got mine last november... All i have for now is HS-475HB for ailerons, CS-65 for elevators, CS-70MG for rudder and a 6V Hydrimax for it.

I mean to put an OS-160FX, maybe in February. I saw a video where a oriental guy fly one with OS160... It´s just a killer flight!!!
Back to top  
Fredy



Joined: 25 Jul 2004
Posts: 45

PostPosted: Wed Dec 29, 2004 6:29 am    Post subject:  

yes its a killer plane. I meant to ask about someone here having it to compair and talk about it. I allready have mine and maidend yesterday. Like you say. there is a problem with the landing gear being to week. I ripped it off on the first landing (and believe me it wasn't hard at all) I even had previously put a small reinforcement to it, but apparently it was not enough. I fixed it right away and today, in a few minutes I'm going back to really try it out.

This is yesterday's report:

1. Nice zig-zag parachutes,
2. Nice inverted flat spins, and
3. Nice inverted flight. Barely any down elevator.
4. I think the knife edge tucked in toward the belly a little bit, but need to do a couple more to be certain.
5. What amazed me the most were the nice water falls. Man that throw really kicks in that flip.
6. The harriers would cause wings to rock heavily from one side to another, I'll have to try with spoilerons.

So if someone has one or gets one, please feel free to post their review. I'd like to compair and see how we can get better flying out of this plane at 6500ft ASL altitude.

There's quite a thread on RCUniverse about it. You can also see it at:

http://www.rcuniverse.com/forum/m_1868363/mpage_19/key_/tm.htm

_________________
I would pay a monthly fee for a 24hr daily "R/C Channel" that can show in Mexico.
Back to top  
jebrando



Joined: 23 Nov 2004
Posts: 4

PostPosted: Wed Dec 29, 2004 6:44 am    Post subject:  

What´s your Yak configuration!?

Did you tried to Torque Roll? In videos, i saw that this plane roll too faster and the corrections must be so faster too...
Back to top  
Fredy



Joined: 25 Jul 2004
Posts: 45

PostPosted: Wed Dec 29, 2004 6:57 am    Post subject:  

I havent tried it quite well. I'm flying at 6500 ft and still struggling to get enough thrust.
I'll try torque rolling as soon as I get settled on that thrust.

Please post me the links to those videos. I'd like to se how other people are flying.

_________________
I would pay a monthly fee for a 24hr daily "R/C Channel" that can show in Mexico.
Back to top  
Flatlandmike



Joined: 29 Oct 2004
Posts: 22

PostPosted: Wed Dec 29, 2004 10:34 pm    Post subject:  

when the tourge roll get fast enough you only need to use either the rudder or the elevator for corrections since it will be in the direction of the corection faster i think the torq roll is easyer when its faster but im still a rookie so i may be wrong but it works better for me this way
_________________
www.lmacky.org
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive