ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Best 40 size 3D with full fuselage??
8 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Joedaniwhite



Joined: 15 Jan 2005
Posts: 11
Location: Millbury, MA

PostPosted: Sat Jan 15, 2005 3:10 am    Post subject: Best 40 size 3D with full fuselage??  

Hey guys! I have a nice Saito 82 sitting here that I'd like to stuff into a 40 size 3D plane. What's the best 40 size full bodied fuselage 3D plane I can stuff my 82 into? I did have a couple of profiles. The engine would come loose after a while and I ended up compacting the wooden motor mounts. The 82 also loosened up the front of the profiles after a while. I did enjoy the way they flew, I'm just into regular looking aircraft.
_________________
As always, thanks for the help!
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 66
Location: Milwaukee,WI

PostPosted: Sat Jan 15, 2005 7:27 am    Post subject:  

I think probably a U Can Do, or a funtana. The 82 would be great on the UCD, but it might not be enough on the Funtana. The funtana 40 is also prone to tip stalls. There's not alot of selection of 40 size birds that aren't profiles.
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 122
Location: Kalamazoo, MI

PostPosted: Sat Jan 15, 2005 1:24 pm    Post subject:  

I've got the 82 in a Funtana and it's great. Plenty of pull-out power Exclamation I love it.
_________________
God bless us all, and keep us safe.
Back to top  
TeamMoki3D



Joined: 08 Oct 2004
Posts: 430
Location: Belvidere, NJ

PostPosted: Sat Jan 15, 2005 1:27 pm    Post subject:  

i agree, the funtana 40 and the UCD 46 would be awsome matches, but the UCD won't do as many scale like 3D maneuvers(if that makes any sence. Laughing i would get the Funtana .40 if i were you!
_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
Joedaniwhite



Joined: 15 Jan 2005
Posts: 11
Location: Millbury, MA

PostPosted: Sat Jan 15, 2005 5:16 pm    Post subject: Then the Funtana 40 it is!!!  

Then the Funtana 40 it is!!! Thanks for the tips Y'all I had the Saito 82 in a Twist. The Twist was okay and did lots of manuvers, just not very well in my opinion?? (for whatever that's worth) The bigger planes seem to fly better (like the Funtana 90) but no sense letting a great motor sit idle. I shall buy the Funtana 40 for the 82 and see what I can do.

Joe

_________________
As always, thanks for the help!
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 122
Location: Kalamazoo, MI

PostPosted: Sat Jan 15, 2005 6:31 pm    Post subject:  

Make sure you go back into the past forums on this site regarding the Funtana 40 set-up. There is some important tips that will make this plane last and fly great. Any questions, just post. Zak and many others have been there and done that and know what their talking about Exclamation Good-Luck Very Happy
_________________
God bless us all, and keep us safe.
Back to top  
TeamMoki3D



Joined: 08 Oct 2004
Posts: 430
Location: Belvidere, NJ

PostPosted: Sat Jan 15, 2005 7:08 pm    Post subject:  

a few things to lighten up would be and places where there is un'needed bulk ply. balsa isnt worth the strength loss cutting away. look around inside the fuse and take a dremel to to some of the heavy stuff.
_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
Joedaniwhite



Joined: 15 Jan 2005
Posts: 11
Location: Millbury, MA

PostPosted: Sun Jan 16, 2005 3:06 am    Post subject:  

Thanks guys, I'll check back in the forum for F-40 set up. Maybe someday I'll be able to fly it like Zak?? Very Happy

Froze my fingers off here in Mass yesterday. PS: I have an insane foamie and I swear I'm getting more stick time and fun out of that than some of my bigger planes. The insane foamie is nice because it has carbon fiber on the leading and trailing edges for those unscheduled landings! Shocked

Take care guys!

_________________
As always, thanks for the help!
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive