ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

How far back on the CG
4 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Joedaniwhite



Joined: 15 Jan 2005
Posts: 11
Location: Millbury, MA

PostPosted: Sun Jan 16, 2005 11:08 am    Post subject: How far back on the CG  

Are you guys going past the recommended aft CG locations given on the plans? I have a UCD3D-60 and a Funtana 90. I have the CG's all the way at the aft postion as it says on the plans. Still can't get the planes to perform quite like the ones I'm watching on this website. Maybe it's just that I suck??? Crying or Very sad

Can you guys give me an example how you are running these planes?? I'm also buying the Funtana 40 for my Saito 82. Any CG tips would be greatly appreciated. Very Happy

Joe

_________________
As always, thanks for the help!
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Sun Jan 16, 2005 11:21 am    Post subject: Re: How far back on the CG  

Joedaniwhite wrote:
Are you guys going past the recommended aft CG locations given on the plans? I have a UCD3D-60 and a Funtana 90. I have the CG's all the way at the aft postion as it says on the plans. Still can't get the planes to perform quite like the ones I'm watching on this website. Maybe it's just that I suck??? Crying or Very sad

Can you guys give me an example how you are running these planes?? I'm also buying the Funtana 40 for my Saito 82. Any CG tips would be greatly appreciated. Very Happy

Joe


Joe, the recommended CG is a starting point merely. I have a FT90 with a CG @ 7.5" instead of 7-1/8". I'd move the CG until it feels more comfortable for your flying style. What motor and prop do you have on your FT90 also? There are a lot of factors that can contribute.

I have a Fat Free Taco with a recommended CG of 1/2" behind the spar. My CG is 1.25" behind the spar. I moved it until I felt it flew the way I wanted it.

Just move the CG aft in 1/4" intervals until you find your spot.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Joedaniwhite



Joined: 15 Jan 2005
Posts: 11
Location: Millbury, MA

PostPosted: Mon Jan 17, 2005 4:24 pm    Post subject:  

Thanks for the help. Both my planes are slightly under powered. The UCD3D has an OS91 in it swinging a 15X6 prop. In cooler weather it hovers just over half throttle. In the summer I'm over 3/4 throttle to hover. I have the CG all the way back to 5.25 inches. The plane hovers extremely well though. When you put it there, it's like it's stuck in the hover. I hesitate bringing it down low because it doesn't have punch to get me out of trouble on the warmer days. I'm running 15% fuel. Maybe I'll step it up a bit?? (I wish I put the Saito 100 in there)

The UCD tucks to the belly BAD on knife edge and a lot of mixing was needed to correct it. The other thing I don't like is the extremely long tail moment. I feel it prevents the plane from doing some great spins, waterfalls, etc... My gosh, I wrote a book here! I'll write another one about the Funtana 90 tomorrow.

Joe

_________________
As always, thanks for the help!
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Mon Jan 17, 2005 6:19 pm    Post subject:  

Joedaniwhite wrote:
Thanks for the help. Both my planes are slightly under powered. The UCD3D has an OS91 in it swinging a 15X6 prop. In cooler weather it hovers just over half throttle. In the summer I'm over 3/4 throttle to hover. I have the CG all the way back to 5.25 inches. The plane hovers extremely well though. When you put it there, it's like it's stuck in the hover. I hesitate bringing it down low because it doesn't have punch to get me out of trouble on the warmer days. I'm running 15% fuel. Maybe I'll step it up a bit?? (I wish I put the Saito 100 in there)

The UCD tucks to the belly BAD on knife edge and a lot of mixing was needed to correct it. The other thing I don't like is the extremely long tail moment. I feel it prevents the plane from doing some great spins, waterfalls, etc... My gosh, I wrote a book here! I'll write another one about the Funtana 90 tomorrow.

Joe


Joe, normally when it is cooler the air is denser, so the engine performs better and vice-versa when it is hot as you know. Stepping up the nitro would give you a little extra kick in performance. The OS .91's setup sounds correct. If the UCD hovers fine and you are happy with it, then you just need a little more power to satisfy your taste.

For the tucking problem, this may help. Try the following:

Fly the model on a normal pass and roll into knife-edge flight, maintain height (do this test in both left and right knife-edge flight). Since it tucks toward the belly, you have two options. 1st, raise both Ailerons slightly approximately 2 turns or move the CG foward some. Try the ailerons first.

The UCD's tail is really more like a pattern plane for better tracking but really shouldn't hurt the performance a lot.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive