ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Batton down the hateches!!! well..receivers..
27 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Sat Jan 22, 2005 7:40 pm    Post subject: Batton down the hateches!!! well..receivers..  

learned a good lesson today. Make sure everything in your plane is STRAPPED DOWN TIGHTLY!!! In the middle of a violent pop up snap, the receiver fell out of its strap. When it fell, it unplugged the equalizer for the ailerons. So when i came outta the snap, i had only rudder and elevator! I got it into a harrier and was gettin close to puttin it down when it rolled into knife edge. I jammed on the rudder and the power and got it into knife edge before it clipped the wing tip. Repair should be easy. Here are some picutres.


Receiver out.JPG
 Description:
 Filesize:  112.22 KB
 Viewed:  442 Time(s)

Receiver out.JPG



Bent landing gear.JPG
 Description:
 Filesize:  141.76 KB
 Viewed:  442 Time(s)

Bent landing gear.JPG



Funtana aileron failure.JPG
 Description:
 Filesize:  133.3 KB
 Viewed:  442 Time(s)

Funtana aileron failure.JPG



_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sat Jan 22, 2005 7:56 pm    Post subject:  

MAN THAT SUCKS! Your just having so much good luck with that thing aren't you? Rolling Eyes
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sat Jan 22, 2005 8:02 pm    Post subject:  

Man, I ran in the clubhouse when he yelled "LOCK OUT!!" :mrgreen:
_________________
--Meyrick--
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sat Jan 22, 2005 8:38 pm    Post subject:  

sooooooooooooooooooooooo.......................................................................................how did u land it? lol
maybe you should tae some lessons from kyle!

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sat Jan 22, 2005 8:53 pm    Post subject:  

TeamMoki3D wrote:
sooooooooooooooooooooooo.......................................................................................how did u land it? lol
maybe you should tae some lessons from kyle!


Having no ailerons and plane turned into a knife edge position so he had no choice but to knife edge it to the ground. He's lucky the grass was thick and soft, otherwise it's a write off.

_________________
--Meyrick--
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 147
Location: North Carolina

PostPosted: Sat Jan 22, 2005 8:55 pm    Post subject:  

Did you just splay that left gear leg out when it hit or did it get the gear plate? That sucks. Silenced
_________________
Ryan
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Sat Jan 22, 2005 8:56 pm    Post subject:  

gear plate is fine. LG is just bent.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sat Jan 22, 2005 10:40 pm    Post subject:  

Ok, see my new signature... it may kick in right now. But what does the title of this topic say? What are hateches and battons? And if they are real words what do they have to do with R/C? Just call me a dumb a$$ if I sound like one. big grin

Jeez I embarrass myself. Rolling Eyes Or Zak... Rolling Eyes Razz
Back to top  
craigman



Joined: 31 May 2004
Posts: 105
Location: Redding, CA

PostPosted: Sat Jan 22, 2005 11:54 pm    Post subject:  

Hey Zak,,
what ya think of the Funtan 90? What engines do you recommend for it? 2 stroke and 4 strokes.
I have the 40 size. How does it compare?
I'm thinking of stepping up to the 90 size.
Thanks for any info you can shoot my way! big grin
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Sun Jan 23, 2005 2:39 am    Post subject:  

Dang'it Zak Crying or Very sad
I'm sorry to hear from you mishap.I was really looking forward to some video.

_________________
http://www.texomarc.org/
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Jan 23, 2005 5:37 am    Post subject:  

Tom Uhlendorf wrote:
Ok, see my new signature... it may kick in right now. But what does the title of this topic say? What are hateches and battons? And if they are real words what do they have to do with R/C? Just call me a dumb a$$ if I sound like one. big grin

Jeez I embarrass myself. Rolling Eyes Or Zak... Rolling Eyes Razz

batton= nail or secure.
i think Zak meant to put Hatches not hateches
so, all of this emans "Batton down the Hatches.... well recievers"
he wants people to secure their receiverse and not make the same mistake. get it? Razz
P.S. dont be embarressed, i had to look these up in a dictionary before i posted Anxious

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sun Jan 23, 2005 9:34 am    Post subject:  

Great! Thank you. smile
I looked them up on the websters on line and found nothing.
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Jan 23, 2005 9:50 am    Post subject:  

Tom and I are now the unstoppable duo of BEAVIS AND BUTT-HEAD!!
Look out world, here we come! laughing

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sun Jan 23, 2005 9:58 am    Post subject:  

KICK ASS!
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Sun Jan 23, 2005 2:36 pm    Post subject:  

Great save. Could have been a lot worse.
_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Sun Jan 23, 2005 3:48 pm    Post subject:  

craigman wrote:
Hey Zak,,
what ya think of the Funtan 90? What engines do you recommend for it? 2 stroke and 4 strokes.
I have the 40 size. How does it compare?
I'm thinking of stepping up to the 90 size.
Thanks for any info you can shoot my way! big grin


I really like the Funtana 90. It flies nice, better than the 40 IMO. The YS 120 is plenty of power, but a Saito 180 would be really nice on it. As for two strokes, i think an OS 160 would be a good combo, but i havent seen any set up that way. The 90 is easier to fly than the 40, and a bit more forgiving.

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Sun Jan 23, 2005 3:49 pm    Post subject:  

Shaun wrote:
Dang'it Zak Crying or Very sad
I'm sorry to hear from you mishap.I was really looking forward to some video.


Dont worry! Itll be fixed before you know it! well, maybe not because tennis is starting..but ill get it fixed and back in the air. Video will be on the way!

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Sun Jan 23, 2005 6:31 pm    Post subject:  

Hey Zak,
I know you didn't get to fly the Funtana90 for very long. But How did it fly compared to your larger Katana.
I boo,boo today with mine and I was thinking about going larger.

_________________
http://www.texomarc.org/
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Mon Jan 24, 2005 5:31 am    Post subject:  

you could probably go to a Moki 1.8 or OS 1.60 size plane with the www.GiantScalePlanes.com Katana 1.40 size., here is the link.. http://www.giantscaleplanes.com/Katana_72.htm VERYYY nice plane.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Mon Jan 24, 2005 8:28 am    Post subject:  

Actually that Katana is a POS! DON'T GET IT. It comes out way to heavy, and more than they say. And is really hard to do 3d with it. You could do 3d with it, bet it is REALLY hard. It flys precision really well though. Also the way everything fit together on mine wasn't the best.
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Mon Jan 24, 2005 9:18 am    Post subject:  

oh
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 147
Location: North Carolina

PostPosted: Mon Jan 24, 2005 11:22 am    Post subject:  

TeamMoki3D wrote:
Tom and I are now the unstoppable duo of BEAVIS AND BUTT-HEAD!!
Look out world, here we come! laughing


I think Mark Leseberg has ya'll beat to that... Mad

_________________
Ryan
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Mon Jan 24, 2005 3:42 pm    Post subject:  

Eh? Question
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Mon Jan 24, 2005 3:48 pm    Post subject:  

i dont get it, he's beavis and butthead?
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Mon Jan 24, 2005 5:24 pm    Post subject:  

Forget that! If he wants to be in... he can be Stewert. Razz
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Mon Jan 24, 2005 5:30 pm    Post subject:  

hahahahhah
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Mon Jan 24, 2005 6:47 pm    Post subject:  

Shaun wrote:
Hey Zak,
I know you didn't get to fly the Funtana90 for very long. But How did it fly compared to your larger Katana.
I boo,boo today with mine and I was thinking about going larger.


The big one flies quite a bit different. A lot of things are different on the big one as compared to the Funtana. This is not to say that either one flies bad, they are just different.

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive