ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Laser
26 posts
 
   3DBatix Forum Index -> Giant Scale
 
Author Message
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sun Jan 23, 2005 12:09 pm    Post subject: Laser  

Last week on tuesday this was dropped off at my house...33% Lanier Laser 200

My set-up (as of now)is going to be:

ZDZ-80 single and Bisson inverted pitts muff
Hitec PCM Rx
Futaba heavy-duty Switches
6v 1500mah nimh packs for rx and ignition
Hitec 5945 servos all around maybe a 5995 on rudder but I doubt it.
And a Bolly 26x10 prop after break-in on engine and a 24x10 for break-in if i remmeber thats what they say to use can't fully rememebr though.



Picture2.jpg
 Description:
 Filesize:  83.61 KB
 Viewed:  488 Time(s)

Picture2.jpg



_________________
-Chris-
3D Foamy


Last edited by Chris on Sun Feb 27, 2005 9:30 am; edited 2 times in total
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Jan 23, 2005 12:13 pm    Post subject:  

nicce Cool my dad had the same laser and it rocked! except he had a 100cc in it. a whiiiiillllleee back. not too fond of that color scheme, you gonna change it?
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sun Jan 23, 2005 1:13 pm    Post subject:  

no i like the black with silver on the wings and the bottom of the wings are pink i like it, what 100cc did he have and how was it i was thinking da-100
_________________
-Chris-
3D Foamy
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Jan 23, 2005 2:21 pm    Post subject:  

since it was a whillle ago, i dont remember which engine it was. but it was 100cc. it flew AWSOME!! he didnt let me fly it since i was only like 4, but he says it flew VERY scale! (not engine wise though Cool )
PS DA 100 would do just fine in it.

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sun Jan 23, 2005 3:20 pm    Post subject:  

i'm not gonna get a da cause i can get a zdz 80 cheaper and i think the 100 would be way to much and add un-needed nose weight.
_________________
-Chris-
3D Foamy
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Jan 23, 2005 4:12 pm    Post subject:  

be sure to build it light, i think its got a 97" wingspan... wouldnd want to have it underpowered.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sun Jan 23, 2005 4:31 pm    Post subject:  

it's already built...wings are under the cloths to the right of the plane...this one flew on a da-50 and almost unlimited vertical it's 96" BTW and this plane comes out like 19 lbs rtf it's won;t be under powered at all....not even close with the zdz 80
_________________
-Chris-
3D Foamy
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Jan 23, 2005 4:47 pm    Post subject:  

woooooooow!! 19 pounds!? my dads was 23 pounds. thank the guy who built it for you! laughing
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Sun Jan 23, 2005 4:57 pm    Post subject:  

what made you choose a lazer? i had one and it was a tank.... didnt fly very well, it was a frank built...
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Mon Jan 24, 2005 8:31 pm    Post subject:  

This laser is light for one it's deisgned by Mr Godfrey and his planes fly awesome, I got an amazing deal on it, i had seen it fly and it flew amazing everyone who i know who has flown or had one absolutely LOVED it. And this isn;t frank built it's lanier
_________________
-Chris-
3D Foamy
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Mon Jan 24, 2005 10:07 pm    Post subject:  

frank built is a contracting company genious, mine was lanier too....
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Tue Jan 25, 2005 5:26 am    Post subject:  

john, my dad's came out really heavy too... maybe its just how some people like to build this plane. but it flies awsome!
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Tue Jan 25, 2005 5:37 am    Post subject:  

john wondra wrote:
frank built is a contracting company genious, mine was lanier too....


Thank you I'm sorry I do;t spend my life searching forums and that I really don;t care about contracting companies please calm down....

_________________
-Chris-
3D Foamy
Back to top  
JR.Master



Joined: 07 Nov 2004
Posts: 462
Location: San Angelo

PostPosted: Sat Jan 29, 2005 4:19 pm    Post subject:  

My dad calculated what type of engine size you need to pull the plane by using power to weight ratio and it came around a 100cc engine. That is if you want unlimited verticle , just in case you get stuck in a sticky situation.
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sat Jan 29, 2005 7:53 pm    Post subject:  

what weight did he use to calculate that?
_________________
-Chris-
3D Foamy
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Wed Feb 02, 2005 7:45 pm    Post subject:  

A little update I guess, I'll be getting a zdz-80 single for sure and am gonna be running a bisson inverted pitts, got a great deal on the muffler way cheaper then if i were to bouy the stock muffs from zdz, I guess it pays to know the bissons laughing
_________________
-Chris-
3D Foamy
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Thu Feb 03, 2005 2:31 pm    Post subject:  

JR.Master wrote:
My dad calculated what type of engine size you need to pull the plane by using power to weight ratio and it came around a 100cc engine. That is if you want unlimited verticle , just in case you get stuck in a sticky situation.

i dont think your gonna need a 100cc, for a 19 pound plane for unlimited verticle... i think 80cc would be best. heck, i have a moki 210 on a 17 pound plane, and it does 5 snaps on the upline.

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Thu Feb 03, 2005 3:41 pm    Post subject:  

I agree with Moki a 80cc is gonna be more then enough.
_________________
-Chris-
3D Foamy
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Wed Feb 16, 2005 5:16 pm    Post subject:  

so chris, hows this Laser coming along?
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Wed Feb 16, 2005 6:15 pm    Post subject:  

nothing has changed lol except I have a bisson inverted pitts muffler for it that I have to pick up sometime when he they are in my area (I don;t liek too far from them) and I had a job interview today so i can afford to get this plane flying laughing
_________________
-Chris-
3D Foamy
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sun Feb 27, 2005 9:26 am    Post subject:  

This is the cowl of my Laser known by some as "Big Black" Anyways the bottom of the wings are pink and I had some pink sticky covering vinyl stuff and I was bored so I decided to make myself a decal I designed in paint shop pro. I just printed it out,and taped it onto the vinyl stuff and cut it out with a hobby knife.

I noticed the first Z wasn't quite lined up so I re-adjusted it.



Picture.jpg
 Description:
 Filesize:  125.74 KB
 Viewed:  157 Time(s)

Picture.jpg



_________________
-Chris-
3D Foamy
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sun Feb 27, 2005 9:27 am    Post subject:  

My printed version for sizing.


Picture.jpg
 Description:
 Filesize:  95.44 KB
 Viewed:  156 Time(s)

Picture.jpg



_________________
-Chris-
3D Foamy
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Feb 27, 2005 10:22 am    Post subject:  

nice, did you get the servos and engine in yet?
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sun Feb 27, 2005 10:30 am    Post subject:  

Not yet, won't be for a while. I don't have a job and I don't have enough money.
_________________
-Chris-
3D Foamy
Back to top  
-3de-



Joined: 25 Sep 2004
Posts: 81
Location: Reno----911

PostPosted: Sun Feb 27, 2005 10:55 am    Post subject:  

My friend just bought a 50% laser with a 3w 240 on it for $4500.00
He also has a laser with a 97 inch wingspan that flys very well.
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sat Mar 12, 2005 12:03 pm    Post subject:  

a member of the bisson family dropped off my muffler today...very nice!
_________________
-Chris-
3D Foamy
Back to top  
 
   3DBatix Forum Index -> Giant Scale All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive