ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

I'm having prop issues
11 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
El Diablo



Joined: 10 Jan 2005
Posts: 37

PostPosted: Mon Jan 24, 2005 5:30 pm    Post subject: I'm having prop issues  

I hung an O.S. 1.20 Surpass on my Funtana but I'm not sure what prop to run on it for 3D. I assume that the O.S. 1.20 and the YS 1.10 are comparable motors in respect to power. I had a 16x8 (it was all I had laying aroud) for starters but didn't like the feel of it. I also had a 15x8 and didn't like it either. I am aware that I want a lower pitch prop for 3D, maybe something in the 4 or 5 range. But I want to eliminate as much guesswork (at 17 bucks a pop) as possible. I'm running 15% nitro right now but I'm willing to go up or down if there is a benefit. I'm specifically curious about Kyle's fuel/prop combo and effective RPM range. I would also like to know where you guys buy your props from. Any input will help
_________________
If you aint crashin'... you aint pushin' the envelope.
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Mon Jan 24, 2005 6:23 pm    Post subject:  

Keep the fuel. A prop that I guess would be good is an APC 16x4w or 17x4.
_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Mon Jan 24, 2005 7:12 pm    Post subject:  

I'm thinking about putting something larger then the saito 100 I have on mine now. Ys 120 or os 160. Can't make up my mind.

Here is Kyle's set up:thanks again guys. Here is my set up.

Engine: YS 120
Prop: Master Airscrew 16x6 K-series
Servos: Hitec 645s-6volts
CG: 7.5
Expo:Ailerons- 25% Elevator- 30% Rudder- 10%
RX: Hitec Eclipse 7
Mixing: Spoilerons for the tumble.
No dule rates

I'm flying at sea level.
and i'll have to check the finished weight and my throws. i'm not sure what they are.




< Message edited by Kyle Woyshnis -- 12/21/2004 11:20:59 AM >

_________________
http://www.texomarc.org/
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Mon Jan 24, 2005 8:33 pm    Post subject: Re: I'm having prop issues  

El Diablo wrote:
I hung an O.S. 1.20 Surpass on my Funtana but I'm not sure what prop to run on it for 3D. I assume that the O.S. 1.20 and the YS 1.10 are comparable motors in respect to power. I had a 16x8 (it was all I had laying aroud) for starters but didn't like the feel of it. I also had a 15x8 and didn't like it either. I am aware that I want a lower pitch prop for 3D, maybe something in the 4 or 5 range. But I want to eliminate as much guesswork (at 17 bucks a pop) as possible. I'm running 15% nitro right now but I'm willing to go up or down if there is a benefit. I'm specifically curious about Kyle's fuel/prop combo and effective RPM range. I would also like to know where you guys buy your props from. Any input will help


Sorry El Diablo, the YS 1.10FZ and the OS 1.20 are not compariable. The YS 1.10FZ is comparible to the Saito 150. The YS .91FZ and the Saito 1.20 are comparible.

I have a YS 1.10FZ spinning APC 16x6 @ 9549 with my CG a little aft of 7.5". (Great CG location BTW!!!) I flew my friends FT90 today that has a Saito 150 up front spinning a 16x6 also. This motor combo with the Saito 150 gives the same performance as the YS 1.10FZ for those that own a YS 1.10FZ. The power is not lacking at all with the Saito 150. If I had to buy a motor other than my YS 1.10FZ or a YS in general, the Saito 150 or 180 would definately be the choice for me.

My friend and I flew our FT90's today and had a vertical race just for fun to see how the Saito 150 and the YS 1.10FZ would compare. Believe it or not, the YS 1.10FZ and the Saito 150 were so close it was hard to really tell who won. I think the Saito 1.50 and the YS 1.10FZ are so close that you probably couldn't tell the difference honestly except for the exhaust tone between the two. It was really hard to tell who really won because they were so close. To the Saito owners, I am not writing this to down the Saito at all. The Saito 150 motor is a monster on this plane and anyone who is not impressed should really rethink about what they are actually looking for in this plane. Anytime you can hover at less than 1/2 throttle is a good thing in my book and both the YS 1.10FZ and the Saito 150 will do this. I think any YS (.91 & up) or Saito (1.20 & up) would be a good combo for those that are interested IMHO.

My friend started out with a Saito 100 on his FT90 as the manual states and absolutely hated it. I flew it with the 100 and it really did lack in power for this particular plane, but would hover at WOT or 1-2 clicks under WOT. Knife edge was out the question with the 100. It would not hold the nose up and lost height quickly in a knife edge. This was my experience with the Saito 100 or atleast with this particular Saito 100 my friend had on his FT90.


Just my observation between the YS and Saito engines for the Funtana S 90.

DTB

Oh sorry, BTW I think for the OS 1.20 a 15x4W or 15x6 would work great. A 16x4 may work depending on how fast you want the spool up to be. I personally like a faster spool up. I would love to try a APC 17x4.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Kyle Woyshnis



Joined: 04 May 2004
Posts: 77

PostPosted: Tue Jan 25, 2005 4:14 pm    Post subject:  

looks like Shaun beat me to it...

My fule is Wildcat YS20/20.... and I have no idea what my RPM is. i dont have a tach..

_________________
Kyle Woyshnis

www.kyle.macapple.com
Back to top  
El Diablo



Joined: 10 Jan 2005
Posts: 37

PostPosted: Tue Jan 25, 2005 5:29 pm    Post subject: Props  

OK cool, I think I'm gonna try the 16x4w, and the 16x6 and see if I like either if those. I think I need to check the gaps on my valves too. I cant remember but I thought that I had an 18x6 on it on my Ultimate a few years ago, and it ran real good then. I'm not sure if thats too much prop or not. Do yo guys think the wide props make that much difference for 3D.
_________________
If you aint crashin'... you aint pushin' the envelope.
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Tue Jan 25, 2005 5:41 pm    Post subject: Re: Props  

El Diablo wrote:
OK cool, I think I'm gonna try the 16x4w, and the 16x6 and see if I like either if those. I think I need to check the gaps on my valves too. I cant remember but I thought that I had an 18x6 on it on my Ultimate a few years ago, and it ran real good then. I'm not sure if thats too much prop or not. Do yo guys think the wide props make that much difference for 3D.


El Diablo, please remember Kyle's YS 1.20 and your OS 1.20 are not the same beast. I find it a little hard to think the OS would spin a 18x6 nicely. No offense, just my thought.

The 16x4W has a much larger blade area from the tip to the hub where as the 16x6 doesn't have the as much area around the tip, but more pitch. My YS 1.10FZ was broken in on an APC 16x4W and now I run the APC 16x6 and like it so much better. I do think you would be happy with the APC 16x4W and it would be roughly like having a 15x6 but with more thrust.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 924
Location: Fremont, CA

PostPosted: Tue Jan 25, 2005 11:25 pm    Post subject:  

Kyle Woyshnis wrote:
looks like Shaun beat me to it...

My fule is Wildcat YS20/20.... and I have no idea what my RPM is. i dont have a tach..


You own a Carden but don't have a tach??? Laughing

_________________
--Meyrick--
Back to top  
Kyle Woyshnis



Joined: 04 May 2004
Posts: 77

PostPosted: Wed Jan 26, 2005 2:21 pm    Post subject:  

Meyrick wrote:
Kyle Woyshnis wrote:
looks like Shaun beat me to it...

My fule is Wildcat YS20/20.... and I have no idea what my RPM is. i dont have a tach..


You own a Carden but don't have a tach??? Laughing


Rolling Eyes

_________________
Kyle Woyshnis

www.kyle.macapple.com
Back to top  
TeamMoki3D



Joined: 08 Oct 2004
Posts: 430
Location: Belvidere, NJ

PostPosted: Wed Jan 26, 2005 3:15 pm    Post subject:  

lol
_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
El Diablo



Joined: 10 Jan 2005
Posts: 37

PostPosted: Wed Feb 23, 2005 8:51 pm    Post subject:  

Ok guys I hit my O.S. 1.20 with a tach last week. The 16x4W is spinning at 10,200, I don't know what the 16x6 is doing though. I think I like the 16x4W better but still not sure. The 16x6 moves out way too fast on the top end, so I want to move my power way down the spectrum. I'm debating on trying a 17x4W but I hate to drop $18 on a prop that I may hate. I need taller gear too for a 17" prop. The top end with the 16x4 is better but I'm willing to lose some top for more in the middle. If Zak wants to mail me that 17x4W he hates I'll try to put it to good use. Wink
_________________
If you aint crashin'... you aint pushin' the envelope.
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive