ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Diablo 3D w/functional landing gear
9 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
deadstk



Joined: 22 Apr 2004
Posts: 21
Location: Fremont, CA

PostPosted: Sat Jan 29, 2005 4:34 pm    Post subject: Diablo 3D w/functional landing gear  

After spending more time than I care to admit on the plans, I finally got around to building my own Diablo! I spent a little extra time making the landing gear functional. It really did not add that much weight it still came it at 14 oz all up. With the exception of the modified gear the plane is stock per the plan. I encountered a couple of minor elevator/ rudder fitting issues with the earlier plans during my build. These have been resolved and the plans have been updated. You can find the updated plans under the Foamy link.

Specs:
Wing Span.......37”
Length............33.75”
Weight............14oz RTF
Power.............AXI 2212/34 Brushless Outrunner Motor
Prop.............. GWS 12x4 Slow Flyer
Ch................ 4
Battery..........ThunderPower 3 Cell-1320mAh-Li-Poly
Rx.................GWS R-4PH 4ch
Servos...........4 Waypoint W-084 Micro Servos
Speed Cont.....Phoenix 25amp



my_diablo_2.jpg
 Description:
 Filesize:  167.15 KB
 Viewed:  270 Time(s)

my_diablo_2.jpg



landing_gear.jpg
 Description:
Close-up of the functional landing gear
 Filesize:  136.87 KB
 Viewed:  272 Time(s)

landing_gear.jpg



Diablo_SG.JPG
 Description:
 Filesize:  164.44 KB
 Viewed:  274 Time(s)

Diablo_SG.JPG



_________________
"What's that dear...no, no, that's not a new plane, I've had that forever." Smile


Last edited by deadstk on Sat Jan 29, 2005 10:51 pm; edited 1 time in total
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 924
Location: Fremont, CA

PostPosted: Sat Jan 29, 2005 4:55 pm    Post subject:  

Dude, those wheelpants seems a lot of work... and you just gonna ball it up in your maiden flight. Mr. Green
_________________
--Meyrick--
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 122
Location: Kalamazoo, MI

PostPosted: Sat Jan 29, 2005 5:13 pm    Post subject:  

Beautiful Plane Exclamation
_________________
God bless us all, and keep us safe.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 924
Location: Fremont, CA

PostPosted: Sat Jan 29, 2005 7:46 pm    Post subject:  

I like them black GWS prop. They also come in gray now too.
_________________
--Meyrick--
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Sat Jan 29, 2005 9:23 pm    Post subject:  

The plane looks great. Those wheel pants do look time consuming, but the results are very impressive.

Where did you get the black GWS 12x4? I'm not really crazy about the orange prop, but they do serve their purpose. I haven't even cut out my foam yet.

DTB

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
deadstk



Joined: 22 Apr 2004
Posts: 21
Location: Fremont, CA

PostPosted: Sat Jan 29, 2005 10:10 pm    Post subject: Diablo 3D w/functional landing gear  

I didn’t really have anything to go by when I built the wheel pants and wheel axils. So a lot of the time I spent was on engineering the set up. If this setup proves to work well it won’t be that big of a deal to build in the future.

The black GWS 12x6 is from Aero Micro (http://www.aeromicro.com). You may have to call Perry to see if he has any in stock.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 924
Location: Fremont, CA

PostPosted: Tue Feb 08, 2005 10:07 am    Post subject:  

Steve, why don't you show us how easy it is to construct those wheelpants. Very Happy
_________________
--Meyrick--
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Wed Feb 16, 2005 10:31 am    Post subject:  

Seems like Hobby Lobby must have seen your wheel pants.

"The Judge" seems to fly nicely. 16oz plane with an AXI 2212/26. Actually reminds me of the Diablo.

Watch the -> Video


_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
-3de-



Joined: 25 Sep 2004
Posts: 40
Location: Reno----911

PostPosted: Wed Feb 16, 2005 11:39 am    Post subject:  

Radioflyer wrote:
Beautiful Plane Exclamation


I must agree! Great job!!
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive