ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

TBM 42% Von Extra Electric at The Arizona Electric Festival
16 of 32 posts archived
 
   3DBatix Forum Index -> Giant Scale
 
Author Message
N81U



Joined: 09 Aug 2004
Posts: 136
Location: Goodyear AZ

PostPosted: Sun Jan 30, 2005 7:02 pm    Post subject: TBM 42% Von Extra Electric at The Arizona Electric Festival  

Here is 240 amps of pulling power,$$$$$$$$$$$$$$$ not sure of all the details but it had two big Thunder power batteries and 4 big Hackers in it. Belt drive and enough power to pull out of a hover inches off the ground, flights seemed short, my guess is 5 minutes. but I do not know how much battery was left. Had a lot of fun at the event, I was able to meet Andrew Jersky, Bill Hempel, Mark Leseburg Jr and tied a foamy not with Yuri who was flying the above 42% extra 260. I want to thank Andrew and Mark for helping me with my FoamtanaS, Jaknyfe and Yak 55 demo I felt like I was a pro or something as the 3 of us covered the right left and center field so the spectators were able to see the the demo from either side. Thanks again.$$

Oh ya there was a 46% hanger 9 electric as well 4 motors and 4 batts$$$$$$$$$$$$$$$$$$$$444

Lee



P1010021.jpg
 Description:
 Filesize:  56.92 KB
 Viewed:  627 Time(s)

P1010021.jpg



P1010020.jpg
 Description:
 Filesize:  71.25 KB
 Viewed:  627 Time(s)

P1010020.jpg


Back to top  
JR.Master



Joined: 07 Nov 2004
Posts: 462
Location: San Angelo

PostPosted: Sun Jan 30, 2005 7:08 pm    Post subject:  

Holy crap that is awesome ,but I sure wouldn't want to pay that pretty penny price for a plane like that.
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Sun Jan 30, 2005 8:27 pm    Post subject:  

I can only imagine the total price tag... Shocked
_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sun Jan 30, 2005 9:57 pm    Post subject:  

I think you can buy a couple of 40% for the price of that one. Shocked
_________________
--Meyrick--
Back to top  
N81U



Joined: 09 Aug 2004
Posts: 136
Location: Goodyear AZ

PostPosted: Sun Jan 30, 2005 10:55 pm    Post subject:  

You could get 2 33% fully decked and a new 14Z. big grin
I overheard someone say $1500 for just the 4 motors no belt drive, god knows how much that cost, it was full CNC bar stock and milled with a fine tip. Cool
Each of the two batteries were like 15" long by 3.5"x3.5" and I would guess $1000 to $1800 each Shocked

This was the exception not the rule. Foamys ruled the flight line every type was there and lots of home brews. The only bummer was that on Friday and Saturday all planes had to do there stuff on the far side of the asphalt, that was like 40 yards. You could hardly see it. frown Sunday was better as we were allowed to fly on the flight line but on a new station in the gravel to the left This time we flew from the pit line to the runway like 25 yards and had an altitude limit of 15’ the backstop height. very tight with one airplane and two was nearly impossable as I found out Embarassed Lots of field pictures at http://rccraze.com/azfestival/photos.htm We need a foamy only event with new rules in AZ sly wink

Lee
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Sun Jan 30, 2005 11:19 pm    Post subject:  

one question...why? more money than a da wraped up into it for 5 minute flights......i fail to see teh point but maybe thats just me.
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Mon Jan 31, 2005 8:27 am    Post subject:  

I think the same. The only thing I can think of, that doesn't really matter, is the noise. Confused
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Mon Jan 31, 2005 9:33 am    Post subject:  

Here's a vid of that badboy.
http://www.rccraze.com/42extra260.mpg

_________________
--Meyrick--
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Mon Jan 31, 2005 2:12 pm    Post subject:  

Great Video, but I couldn't really enjoy it fully. I only kept seeing a flying and hovering "$" sign.

Seriously, that thing has some major thrust to it on the ground and in flight. Good find.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Mon Jan 31, 2005 5:03 pm    Post subject:  

I heard the total value of the plane is $22,000. Shocked Sorry, I don't really see an advantage with that price. Confused Plus I don't think it has the same performance as a DA150...
_________________
--Meyrick--
Back to top  
N81U



Joined: 09 Aug 2004
Posts: 136
Location: Goodyear AZ

PostPosted: Mon Jan 31, 2005 5:17 pm    Post subject:  

Do you remember the 44% extras with the 3W 120s that were at the TOC 4 or 5 years ago that is about the power this one has but only for 4 or 5 minutes. Did not power it self through the multiple snaps very well. frown

Lee
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Mon Jan 31, 2005 5:52 pm    Post subject:  

What is the weight on this waste? Razz It looks like those slow harrier thingies before a hover are really tippy. IMHO. Confused
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Tue Feb 01, 2005 6:43 pm    Post subject:  

Mmmmm...Hacker big grin I dunno about you but if I had cash spewing out of the kitchen sink I would get one. smile As for weight, thats a TBM 260 so if you know their planes they're really light.
_________________
Lower??!!
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Tue Feb 01, 2005 7:33 pm    Post subject:  

Wood is light...batteries are not...
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
N81U



Joined: 09 Aug 2004
Posts: 136
Location: Goodyear AZ

PostPosted: Tue Feb 01, 2005 7:58 pm    Post subject:  

Gas is cheep...batteries are not...

Lee
Back to top  
15 posts here were not archived
TeamMoki3D



Joined: 08 Oct 2004
Posts: 433
Location: Belvidere, NJ

PostPosted: Thu Feb 03, 2005 2:22 pm    Post subject: Re: TBM 42% Von Extra Electric at The Arizona Electric Festi  

N81U wrote:
I want to thank Andrew and Mark for helping me with my FoamtanaS, Jaknyfe and Yak 55 demo I felt like I was a pro or something as the 3 of us covered the right left and center field so the spectators were able to see the the demo from either side. Thanks again.$$

Lee

Did you tell them a dorky little 12 year old named the Jaknyfe? Laughing Razz

_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
1 post after this was not archived
 
   3DBatix Forum Index -> Giant Scale All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive