ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Paint
14 posts
 
   3DBatix Forum Index -> Workshop
 
Author Message
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Sat Feb 05, 2005 5:14 am    Post subject: Paint  

Guys, just starting to do my own scheme on my DP Edge 540, am using a BME 50cc gasser. I gotta spray the cowl in three colours and am using RC Colours spray cans that match Oracover/Profilm.

My question is: do I have to fuel proof or laquer this paint or can I just leave it?

I'm used to fuelproofing paint on glow powered planes but have to brush it so the finish is not so cool. So if I can get away with it on gas, I will.

There's no clue on the tin as to whether it's petrol proof or not. Rolling Eyes

Thx

_________________
Ya torkin' ta me?
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sat Feb 05, 2005 7:27 am    Post subject:  

What brand is your paint spray cans?
_________________
--Meyrick--
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Sat Feb 05, 2005 10:28 am    Post subject:  

Just says "RC" in big yellow letters and "colours" underneath in black and then "planes and boats" beneath that. I've never seen them before but bought them because they match the film. Smells like enamel to me, if you spray a bit. Good solid colours though.

Don't think they're American though cos of the way "colours" is spelt.

_________________
Ya torkin' ta me?
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sat Feb 05, 2005 1:14 pm    Post subject:  

It's spelt the good way smile Go Canada!
_________________
-Chris-
3D Foamy
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Sat Feb 05, 2005 3:56 pm    Post subject:  

Spray a little on some scrap plastic or fiber glass, let it dry, then spill some gas on it and see if it smears. Make sure it's fully cured though.
_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sat Feb 05, 2005 7:11 pm    Post subject:  

Radioflyer wrote:
Spray a little on some scrap plastic or fiber glass, let it dry, then spill some gas on it and see if it smears. Make sure it's fully cured though.


Good idea or just get some clears in a can from Lusterkote. They are glow and gas proof.

_________________
--Meyrick--
Back to top  
N81U



Joined: 09 Aug 2004
Posts: 136
Location: Goodyear AZ

PostPosted: Sat Feb 05, 2005 8:00 pm    Post subject:  

Test the clear on the paint you go with, some fuel proof paints or clears attack certain paints. for example Krylon and Lusterkote do not like each other.

Lee
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sat Feb 05, 2005 8:07 pm    Post subject:  

Yep, I forgot about incompatibility. Test, test, test....
_________________
--Meyrick--
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Sun Feb 06, 2005 1:49 am    Post subject:  

Okay guys, cool. I usually use a two part epoxy proofer but you really have to be careful that the paint is properly dry - like a week! Trouble is it drys so damn fast it leaves brush lines.

Does Lusterkote come in an aerosol? Does it yellow with age? If it's okay I'll see if I can find it over here.

_________________
Ya torkin' ta me?
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Sun Feb 06, 2005 5:22 pm    Post subject:  

Topflite Lustercote is what is use, and it does come in aerosol. It matches up with Topflite Monocote well. It's fuel proof. You can get it at a good price form Tower. God Bless. Jay.Here's a pic of my GP Extra 300S .40 w/ Topflites monokote and Topflites Lustercote in Metalic Blue.


IMG_0364.jpg
 Description:
 Filesize:  101.45 KB
 Viewed:  455 Time(s)

IMG_0364.jpg



_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Sun Feb 06, 2005 5:30 pm    Post subject:  

Honestly the only thing painted is the cowl, I painted the canopy after this pic.

By the way, You rock, Gezoid. I still laugh when I think about the

Deer that got too much Throttle laughing

_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Mon Feb 07, 2005 9:32 am    Post subject:  

Hehehee. me too! I was inspired that day.

This paint I got is crapola, BTW. I sprayed a couple of test pieces (old fibreglass cowl offcuts) and the red is still tacky after like 30 hours! The other colours dried okay though. WTF is that about?

I figure I'll go to an auto paint shop that make up aerosols with some samples of film and let them match it. I've done it before but the match is usually pretty near rather than perfect. Also it runs out at £10 a can, but you've still got them for the next project. Car cellulose takes any laquer or fuel proofer too and dries quick.

Should have known better than to buy "modelling" paint. Live and learn. Rolling Eyes

Radioflyer, that's one cool lookin' airplane. Killer smart, man.

_________________
Ya torkin' ta me?
Back to top  
Robert300L



Joined: 17 Apr 2004
Posts: 134
Location: San Diego, CA

PostPosted: Sun Mar 06, 2005 8:39 pm    Post subject:  

Did it match Razz
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Mon Mar 07, 2005 10:17 am    Post subject:  

After stripping the cowling of the crud enamel paint with thinners I went to the car body shop and a guy there matched the 3 colors of profilm no problem. By the end of the day the cowl was finished, pinstripes and all. Car cellulose is way cool compared to the gunk you buy at the local hobby store. The aerosols were huge and will see me through a couple more planes I reckon. It's the way to go. Thinking of getting an air brush now. I'm no artist, but even I could do cool effects with one.

And how about this. The hobby store wanted £4.50 for like 1/2 pint of cellulose thinners. The car place charged me £10 for a GALLON! Anti bloom and everything. That's a British gallon too, 8 pints, not a little US gallon.

_________________
Ya torkin' ta me?
Back to top  
 
   3DBatix Forum Index -> Workshop All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive