ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

FoamtanaS
21 of 36 posts archived
 
   3DBatix Forum Index -> Foamies
 
Author Message
sethslasher



Joined: 23 Oct 2004
Posts: 72
Location: Ohio

PostPosted: Thu Feb 10, 2005 6:06 pm    Post subject: FoamtanaS  

I have just heard of the new FoamtanaS by Lee Ulinger and have watched the video of Zak flying the FoamtanaS. It looks like a great plane on the video, but have heard a little bit about the FoamtanaS. Can anyone tell me the good and BAD points of this plane as I may be looking to get one sometime soon. I currently have an Ikarus Shock-Flyer (Extrema) and am looking for a better foamie to learn 3D faster on. I have heard one person say that the FoamtanaS is 20 times better. Is it?

Also please tell me your setup (motor, battery, servos ect.) if possible.

I am 14 and am looking into the "cheap" way of learning to do 3D.

Thanks Guys!

_________________
Got the plane, got the radio . . . . . . . . now all I need is the talent!
Back to top  
john wondra



Joined: 05 May 2004
Posts: 251
Location: auburn, wa

PostPosted: Thu Feb 10, 2005 6:14 pm    Post subject:  

hey i have flown 3 different foamtana's and they do fly well but they are a bit slugish unless you make the alerons bigger than "called" for. were you the kid that was at the model expo in puyallup? i was flying the adrenaline 3d. thats a sweet flying plane too Very Happy better than the foamtana IMO Wink
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.abellrc.com
www.e-flightline.com
www.littlescreamers.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Toronto, Canada

PostPosted: Fri Feb 11, 2005 9:50 am    Post subject:  

foamies aren't at all cheap to get into.
_________________
-Chris-
3D Foamy
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 783
Location: Belvidere, NJ

PostPosted: Fri Feb 11, 2005 12:38 pm    Post subject:  

amen to that! Laughing they're every bit as expensive as your average sized .40 size glow plane.
_________________
John Paragallo

Wild Hare RC

Smart-Fly

Electro Dynamics
Back to top  
sethslasher



Joined: 23 Oct 2004
Posts: 72
Location: Ohio

PostPosted: Fri Feb 11, 2005 12:42 pm    Post subject:  

No wasn't the kid at the expo, and they are cheaper to me compared to the 33% and up that do 3d just as well. yes they are as expensive as the .40 - .60 size glows, but they 3D better than them.
_________________
Got the plane, got the radio . . . . . . . . now all I need is the talent!
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Toronto, Canada

PostPosted: Fri Feb 11, 2005 1:14 pm    Post subject:  

sethslasher wrote:
No wasn't the kid at the expo, and they are cheaper to me compared to the 33% and up that do 3d just as well. yes they are as expensive as the .40 - .60 size glows, but they 3D better than them.


Well obviously they are cheaper then a 33% plane but you shouldn;tbe using a 33% plane to learn 3d in the first place IMHO. And they don't necessarily do 3d better then a 40 size plane or 60 plane. If I were you I would go get a 40 size profile arf a os 46 AX and a standard flight pack.

_________________
-Chris-
3D Foamy
Back to top  
sethslasher



Joined: 23 Oct 2004
Posts: 72
Location: Ohio

PostPosted: Sat Feb 12, 2005 6:31 am    Post subject:  

Thanks for the tips guys. Would a Fat Free Taco work as a good plane to learn 3D?
_________________
Got the plane, got the radio . . . . . . . . now all I need is the talent!
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 783
Location: Belvidere, NJ

PostPosted: Sat Feb 12, 2005 6:36 am    Post subject:  

yeah, if you want setup tips and stuff, then look around in the forum index. theres a good topic done by DTB on the Fat Free Taco.
_________________
John Paragallo

Wild Hare RC

Smart-Fly

Electro Dynamics
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Toronto, Canada

PostPosted: Sat Feb 12, 2005 10:57 am    Post subject:  

a FF taco would be great, my friend has the original taco and it is heavy and doens;t fly so well, so remember use the recommended gear for it and keep it light.
_________________
-Chris-
3D Foamy
Back to top  
john wondra



Joined: 05 May 2004
Posts: 251
Location: auburn, wa

PostPosted: Sat Feb 12, 2005 12:05 pm    Post subject:  

ummm only think about 3ding a built up plane is if you have a serious dork, its not a 10 second repair job.... like if you got a foamy....
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.abellrc.com
www.e-flightline.com
www.littlescreamers.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 783
Location: Belvidere, NJ

PostPosted: Sat Feb 12, 2005 6:50 pm    Post subject:  

thats why you dont have dork ups! Razz
_________________
John Paragallo

Wild Hare RC

Smart-Fly

Electro Dynamics
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 805
Location: Sunnyvale, CA

PostPosted: Sat Feb 12, 2005 7:01 pm    Post subject:  

stuffin it in is inevitable. If you dont crash, you either arent flying enough, or arent pushing the envelope enough.
_________________
Zak West

Desert Aircraft

Smart Fly

Fromeco Avionics

Lee Ulinger Foamies
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 783
Location: Belvidere, NJ

PostPosted: Sat Feb 12, 2005 7:15 pm    Post subject:  

true. which is why my first foamy lasted me 1 day, then it was gone.
_________________
John Paragallo

Wild Hare RC

Smart-Fly

Electro Dynamics
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 503
Location: Morgan Hill, CA

PostPosted: Sat Feb 12, 2005 7:31 pm    Post subject:  

So it wasn't your prop adapter... Rolling Eyes
Back to top  
66tbird



Joined: 24 Dec 2004
Posts: 4

PostPosted: Sat Feb 12, 2005 8:09 pm    Post subject:  

I went with the FOamtanaS as a first 3D because it was a little larger than most and that slowed it down enough to learn on. At just over 12 oz and using a TP-750 and a AXI 22-1234, with a 11-4.7 and JR micro stuff it's got 50 flights and is still in prefect condition, (never a dork in). Yes it was a little expensive, and I think of it as the Cadillac of 3D, ( I could be wrong on that one of course) but it does fly really good.
Back to top  
15 posts here were not archived
El Diablo



Joined: 10 Jan 2005
Posts: 46

PostPosted: Wed Mar 02, 2005 11:50 am    Post subject:  

3dbatixkid wrote:
stuffin it in is inevitable. If you dont crash, you either arent flying enough, or arent pushing the envelope enough.



HEEYY... nobody asked to use MY phrase. big grin

_________________
If you aint crashin'... you aint pushin' the envelope.
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1004
Location: Belvidere, NJ

PostPosted: Wed Mar 02, 2005 12:14 pm    Post subject:  

sethslasher wrote:
I have an Ikarus Extrema Shock Flyer, and I push myself way too much (as my dad says) I can do harrier rolling circles in either direction at knee height. I was asking about the fat free taco cuz some1 said that i should learn 3D on a glow plane Confused
but I really like the foamies better

you should have the foamies JUST as a 3d trianer, that what i use mine for. but thats it. i dont fly them for fun. i fly my Cap for fun Cool

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
minnzoo



Joined: 27 Feb 2005
Posts: 30
Location: Conestoga, Pa.

PostPosted: Wed Mar 02, 2005 5:30 pm    Post subject:  

What's a good plane to practice 3D on G2?

Sethslasher, I have a Fat Free Taco that I flew about 7 times that's looking for a good home. Flew great but i fly in my backyard and it was just too fast for takeoff and landing and I am not good enought to hand catch.

David
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1004
Location: Belvidere, NJ

PostPosted: Wed Mar 02, 2005 5:33 pm    Post subject:  

uhh, you can go to www.realflight.com and look for the swap page andf ine one that is made for 3d. people modify and upload them to that site.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
minnzoo



Joined: 27 Feb 2005
Posts: 30
Location: Conestoga, Pa.

PostPosted: Wed Mar 02, 2005 5:36 pm    Post subject:  

Yea, I know but i thought someone might have a good one in mind. It could take days to find and try a good one.
Back to top  
sethslasher



Joined: 23 Oct 2004
Posts: 103
Location: Ohio

PostPosted: Fri Mar 04, 2005 6:35 am    Post subject:  

how much would you want for the FF taco?
what all would you sell w/it?

also on g2 i made a cap 232 that is awesome at 3d u should try it
it is the cap 232 freestylin' 40% u need add ons 3 for the motor tho

_________________
Push yourself; it's just an airplane!
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive