ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

New shock flyers arent so hot!
15 of 31 posts archived
 
   3DBatix Forum Index -> Foamies
 
Author Message
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1082
Location: Sunnyvale, CA

PostPosted: Mon Feb 14, 2005 10:42 pm    Post subject: New shock flyers arent so hot!  

I picked up two shock flyers today. One extra and one superstar. I have to say, they arent as good as they used to be. All the parts are pre cut, which is fine unless you want to modify the surfaces like i used to do. Also, the foam is spongey, and not depron-like. The printing on the colors is better though. Also, the parts fit is lousy. Slots are too wide, and some parts just dont come close to lining up. Ill have some pictures in a few days.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1041
Location: Belvidere, NJ

PostPosted: Tue Feb 15, 2005 5:03 am    Post subject:  

hmm, that sucks. good thing i decided not to buy one big grin do you think you'll have them flying?
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Tue Feb 15, 2005 9:11 am    Post subject:  

hmmm i built one 3 weeks ago and it fit together like a puzzle, as far as spongy depron i didnt notice it..... bad batch maybe?
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1310
Location: Fremont, CA

PostPosted: Tue Feb 15, 2005 10:17 am    Post subject:  

Pretty simple business strategy ladies. Possible change of manufacturers and materials for cost savings. It happens all the time, even with high-tech technology stuff. This is probably Zak's 8th Shockflyer so I know he can tell the difference.
_________________
--Meyrick--
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Tue Feb 15, 2005 10:46 am    Post subject:  

if its your 8th shocky why not buy depron and cut em yourself and recycle your old carbon sly wink
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1310
Location: Fremont, CA

PostPosted: Tue Feb 15, 2005 11:04 am    Post subject:  

john wondra wrote:
if its your 8th shocky why not buy depron and cut em yourself and recycle your old carbon sly wink


Cause he's a lazy mofo! He's garage is a Shockflyer junkyard laughing

_________________
--Meyrick--
Back to top  
team chula vista



Joined: 10 Feb 2005
Posts: 60
Location: san diego

PostPosted: Tue Feb 15, 2005 12:35 pm    Post subject:  

did u guys also see that the measurments say 10 mm when they really mean 10 cm idea! mine felt kind of spongey. also how did u set up your shock flyer
_________________
the only type of flying is 3d flying
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Tue Feb 15, 2005 12:56 pm    Post subject:  

i got a extra v2 shocky and it was precut etc etc but it fit way better then my first one did, all the parts were super snug and the foam doens;t feel spongy at all feels like the depron I have and feels the same as my first one. Maybe since the first shipment of these to where I got mine they have changed or something because I got one from the first shipment of the v2 ones (precut orignals)
_________________
-Chris-
3D Foamy
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1082
Location: Sunnyvale, CA

PostPosted: Tue Feb 15, 2005 2:11 pm    Post subject:  

john wondra wrote:
hmmm i built one 3 weeks ago and it fit together like a puzzle, as far as spongy depron i didnt notice it..... bad batch maybe?


could be a bad batch. i dont want mine pre cut though. ill post pictures of my setup. I already screwed up my extra, built the fuse with no wing in it! oh well,i fixed it. this one will have my axi 2204/54 and gws picos, and the super star with have the axi 2208/26 and HS 55s.

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1082
Location: Sunnyvale, CA

PostPosted: Tue Feb 15, 2005 10:32 pm    Post subject:  

here are some pictures


P2150372.JPG
 Description:
 Filesize:  67.82 KB
 Viewed:  617 Time(s)

P2150372.JPG



P2150371.JPG
 Description:
 Filesize:  65.35 KB
 Viewed:  617 Time(s)

P2150371.JPG



P2150373.JPG
 Description:
 Filesize:  60.88 KB
 Viewed:  617 Time(s)

P2150373.JPG



P2150375.JPG
 Description:
 Filesize:  61.17 KB
 Viewed:  617 Time(s)

P2150375.JPG



_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Tue Feb 15, 2005 10:49 pm    Post subject:  

ooo the prity collors.... big grin how is teh power gunna be with the smaller motor?
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1082
Location: Sunnyvale, CA

PostPosted: Tue Feb 15, 2005 10:53 pm    Post subject:  

I flew it in the living room and its got plenty of power. I need to weigh the thing. Im guessing its around or a bit under 6 oz.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Tue Feb 15, 2005 10:55 pm    Post subject:  

i noticed there is no tri stock running down teh fuse. whats keeping the tail from twisting? kevlar thread? strip of depron on the bottom?
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Wed Feb 16, 2005 8:25 am    Post subject:  

just curious what didn;t you put your servos in the servo cut out they have for the tail? I also noticed your battery isn;t in the slot why not? Balance? Also where is your cg?
_________________
-Chris-
3D Foamy
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Wed Feb 16, 2005 9:13 am    Post subject:  

im going to venture to say lateral cg? makes sence to me, thats what i do.
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
16 posts after this were not archived
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive