ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Do I need to switch servos?
9 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Sun Feb 20, 2005 8:52 am    Post subject: Do I need to switch servos?  

Well I was working on my funtana 90 last night. I was doing the linkagesand all the little stuff. I was thinking about my servos. I have S3004's on the elevators. I was wondering if these would be strong enough. they have around 50 in oz of tork, since I am using a six volt battery. On ailerons and rudder I have S3010's which have about 90 oz of tork. I was wondering if I should switch. Also if I should change, what should I switch to?
_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Feb 20, 2005 9:33 am    Post subject:  

well, 3004's are WAY too weak for your elevators, or any surfacefor that matter. change thm to Hitec 645MG's. they have 134oz of tork on 6.0v and they have metal gears. hitec makes 645's and 625's with metal gears. the 625 has about 110oz tork. so, i would go with either the hitec 645 mg's or the 625 mg's.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sun Feb 20, 2005 10:49 am    Post subject:  

hey, how do you like your 3010's i just ordered 4 of them for one of my 3d planes, are you using nimh battery with them?
_________________
-Chris-
3D Foamy
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Feb 20, 2005 10:52 am    Post subject:  

chris, i looked into it and i found that "Digital servos work best with lithium batteries, but can also be used with NiCad and NiMH." so, your good to go! Cool
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sun Feb 20, 2005 1:05 pm    Post subject:  

Thanks Moki, 3010's I don't think are digis but on the box apparently they say not to use with nimh batteries on it for some reason, I'll be using nicd 600mah but I was just curious.
_________________
-Chris-
3D Foamy
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Sun Feb 20, 2005 4:18 pm    Post subject:  

Ok, I'll definatly switch the elevator servos. Could I get away with more S3010's? They're alot faster than the 645's, and the're cheaper.

Hey Chris, I like them alot. They are very fast. they are also pretty smooth, but you wouldn't mistake them for digitals.

_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Feb 20, 2005 4:59 pm    Post subject:  

not a problem on this plane, just ask Kyle. he uses 645MG's. also, i use them on my BME Edge and they are PLENTY fast. no need to have servos faster than 645's for the Funtana 90.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Sun Feb 20, 2005 7:49 pm    Post subject:  

So, are you saying, that I should dump all the 3010's? Picking up 5 645's is like $200! But if it's worth it I guess I'll have to do it. Rolling Eyes Better call shaun on the bank robbing job. Cool Oh, well I guess I have an excuse to buy me a Mojo from Paul Swany. Razz I'll have to bust the motor from the trainer for it. My mom's gonna get me that credit card yet! laughing
_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
El Diablo



Joined: 10 Jan 2005
Posts: 46

PostPosted: Tue Feb 22, 2005 9:14 pm    Post subject:  

Hey Fly Boy if you wanna go digital, the Hitec 5625's are on sale @ www.servocity.com for 46.75 each if you buy 4 or more. I just ordered 5 of 'em from there today for $233.00. For less than $8.00 a piece more, you can go digital and 30% faster than the 645's.
_________________
If you aint crashin'... you aint pushin' the envelope.
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive