ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Elevator Throw Problem
18 of 34 posts archived
 
   3DBatix Forum Index -> Foamies
 
Author Message
sethslasher



Joined: 23 Oct 2004
Posts: 105
Location: Ohio

PostPosted: Fri Mar 04, 2005 2:28 pm    Post subject: Elevator Throw Problem  

i have the extrema shock flyer, and recently converted it to a 4 ch. radio from the 9CAP the ailerons have a little more throw and so does the rudder, but the elevator has less Crying or Very sad Crying or Very sad
whats the deal with this?
any possible solutions?
it still flies fine but it is a struggle to hover now in 10mph winds (i could do it with ease before)

_________________
Push yourself; it's just an airplane!
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Fri Mar 04, 2005 2:35 pm    Post subject:  

why did you switch? if you cant switch back then i would suggestmoving yourservo arm out to the last whole and the control horn in to the first whole (so its closer to the surface) but i wouldnt recommend a 4 channel radio with this plane. have duel ates is very good and with a non computer radio you can change end point and crap. see if you can change back to the 9C.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
sethslasher



Joined: 23 Oct 2004
Posts: 105
Location: Ohio

PostPosted: Fri Mar 04, 2005 2:45 pm    Post subject:  

my parents are divorced (im 14) and the only house that flies (besides me) is my dad's
i want to take a plane to my mom's to fly too, but my dad doesn't want the 9C over there (we have only 1) so we put it on a 4 ch. radio for that reason.
i am using the stock control horns/rods, and my rod is on the furthest hole out on the servo arm

_________________
Push yourself; it's just an airplane!
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Fri Mar 04, 2005 4:27 pm    Post subject:  

oh, im sorry to hear that man. frown hmm, i dont know what else you ca do to give yourself more throw. the only thing i can think of are moving your cg back about a 1/2 of an inch or so. and mayeb if your plane drifts to lets say the canopy in a hover, you cold add in some down trim so you would have more deflection to keep it straight. also if you can, try to either make or buy a longer set of micro servo arms for your servos. im all outta ideas bro. big grin lol if you combine all this stuff you should get more elevator response.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Colin



Joined: 08 Jun 2004
Posts: 25
Location: Canada

PostPosted: Fri Mar 04, 2005 4:54 pm    Post subject:  

You can glue (CA) extensions onto the servo horns. I'll get a pic later tonight.

Colin

_________________
Great Hobbies
Thunder Tiger
Morgan Fuels
HobbyCraft Canada
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Fri Mar 04, 2005 6:43 pm    Post subject:  

Colin wrote:
You can glue (CA) extensions onto the servo horns. I'll get a pic later tonight.

Colin

yeah, take a small piece of light ply (about the size of your control arm) and poke a whole near the end. when colin gets the pics you shoud try it out. its what i use on my Flying Thingz Extra. LOTS of throw. and im using a 4 channel too laughing

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Colin



Joined: 08 Jun 2004
Posts: 25
Location: Canada

PostPosted: Fri Mar 04, 2005 8:53 pm    Post subject:  

I forgot that I don't have the digi camera here..sorry. I used plastic, light ply would be just as good smile

Colin

_________________
Great Hobbies
Thunder Tiger
Morgan Fuels
HobbyCraft Canada
Back to top  
Batix Kid



Joined: 07 Apr 2005
Posts: 90

PostPosted: Thu Apr 07, 2005 2:45 pm    Post subject:  

nope ur all wronge
i had the same problem with my shocky it depends on where the hing is ,if the hing is on the same side as the horn u will get throw that way because it doesnt have to travel that extra gap in between,where as if the hing and the horn is on the oppisite side it has to move further....in other words stick the horn on the same side as the hing.
it realy does make a difference........let me know
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Thu Apr 07, 2005 6:37 pm    Post subject:  

Batix Kid wrote:
nope ur all wronge
i had the same problem with my shocky it depends on where the hing is ,if the hing is on the same side as the horn u will get throw that way because it doesnt have to travel that extra gap in between,where as if the hing and the horn is on the oppisite side it has to move further....in other words stick the horn on the same side as the hing.
it realy does make a difference........let me know

no. if you mean put the control horn on top because there is no bevel, you're wrong. you can't put the horn through the top into the bevel because your surface would bind every time it went to full throw in that direction. eithewr way you look at it, you wouldn't get more throw, trust me. if you can, draw me a picture on paint and post it so ic an get a better understanding of what you mean.

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Thu Apr 07, 2005 6:44 pm    Post subject:  

I don't really get what your saying?
Like what Butt. said, draw it. But do it clearly so we don' get lost again. Rolling Eyes big grin
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Thu Apr 07, 2005 7:50 pm    Post subject:  

Batix Kid wrote:
nope ur all wronge
i had the same problem with my shocky it depends on where the hing is ,if the hing is on the same side as the horn u will get throw that way because it doesnt have to travel that extra gap in between,where as if the hing and the horn is on the oppisite side it has to move further....in other words stick the horn on the same side as the hing.
it realy does make a difference........let me know


That will only make a difference with differential throw. The overall travel will not be effected very much. Best thing is to make sure that when your servo is at neutral, the servo arm is 90 degress to the servo, and the pushrod is 90 degrees to the control arm on the servo....

let me see if i can find an example of this...



P9090189.JPG
 Description:
 Filesize:  64.66 KB
 Viewed:  437 Time(s)

P9090189.JPG



_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Batix Kid



Joined: 07 Apr 2005
Posts: 90

PostPosted: Fri Apr 08, 2005 2:35 am    Post subject:  

here this is the best way i can show you...look ill try to take another of it a bit better...dont mind the the plane its had it lol


Picture 004.jpg
 Description:
 Filesize:  96.42 KB
 Viewed:  426 Time(s)

Picture 004.jpg


Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Fri Apr 08, 2005 4:22 am    Post subject:  

i still dont get what you're saying. that picture doesn't describe what you said in your first post very well.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Batix Kid



Joined: 07 Apr 2005
Posts: 90

PostPosted: Fri Apr 08, 2005 5:21 am    Post subject:  

instead of having it like this with the horn at the bottom and the hing at the top


Picture 009.jpg
 Description:
 Filesize:  123.43 KB
 Viewed:  417 Time(s)

Picture 009.jpg


Back to top  
Batix Kid



Joined: 07 Apr 2005
Posts: 90

PostPosted: Fri Apr 08, 2005 5:25 am    Post subject:  

have it like this,,,,,,all you have to do is cut a little slot out for the push rod to go thought and reverse the servo...if u do belive me try it


Picture 005.jpg
 Description:
 Filesize:  122.72 KB
 Viewed:  416 Time(s)

Picture 005.jpg


Back to top  
15 posts here were not archived
Batix Kid



Joined: 07 Apr 2005
Posts: 33

PostPosted: Tue Apr 12, 2005 6:46 am    Post subject:  

Zak if i do what im doing how will it effect my tork, im just saying this because it can tork roll with ease.
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 125
Location: Milwaukee,WI

PostPosted: Tue Apr 12, 2005 12:05 pm    Post subject:  

Batix Kid wrote:
Zak if i do what im doing how will it effect my tork, im just saying this because it can tork roll with ease.


What is meant by this, is that you lose a LOT of your servo power, as wasted energy. Hope that clears everything up!
Back to top  
Batix Kid



Joined: 07 Apr 2005
Posts: 33

PostPosted: Tue Apr 12, 2005 12:28 pm    Post subject:  

ok
Back to top  
1 post after this was not archived
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive