ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Hitec digi's
28 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Thu Mar 10, 2005 7:01 pm    Post subject: Hitec digi's  

anyone know what would be best for my 35% extra? i dont wanna go with 8611's because they cost a friggin lot!! i wanna go with the Hitec 5745MG's they have 250 oz/in tork at 6.0 volts(as i will be running 5.1 with an EDR 111) and they only cost 80 bucks!!! http://shopatron.com/product/product_id=RCD35745J/110.0.605.234.0.0.0 i think they are better, what should i do. go with JR's or try some Hitec's? Kyles not online so i cant ask him. thanks!
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Thu Mar 10, 2005 7:41 pm    Post subject:  

Is that that titanium geared one?
But yes I would go with those or 5945s. That is what I am using on my Katana. They are very nice. *8411 ass kicker*
Just DO NOT GET THE 5625s OR 5645s. THEY HAVE ISUES.
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Thu Mar 10, 2005 10:03 pm    Post subject:  

Which ones don't have issues?!? I've wasted over $250 in servos (Hitec) that did nothing but fail.

Look up on RCU and you will find many instances with people losing jets and SA planes due to 5945's locking hard over. ( this isn't only the 5945's mind you)

And the 5645 that I got for my Dad's UCD sure as hell better not f*** on it. (I got it befire I knew these problems)

Futabas seem to have weak gear trains, as I have done nothing but strip them. And don't come off with saying it's my problem because the Hitecs were brand new and the Futabas strip for nothing even though my setup was flawless.

Now i'm not being biased just on the brand name, but the JR is the only reliable one that I would trust any of my planes to. No failures or anything.

Go with what you want to go with, but for me, the extra money is really
worth it. Wouldn't wanna lose your Extra that's for sure. sly wink

**Gets off soap box**

_________________
Lower??!!
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Fri Mar 11, 2005 3:40 am    Post subject:  

I have Hitec 5645MG all around in my Funtana that have not given me any problems yet, not to say that it can't happen because anything is possible.

I agree with the above statment about which servo is trouble free? I have had or seen problems with all servos. I've seen Futaba work when they want to. Seen Hitec's strip gears for no reason and seen erratic JR servos. If you look hard or long enough about anything in this world/hobby, you will find somebody that doesn't like it or had a bad experience.

Buy what you feel comfortable with is the only advice I can give you.

DTB

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Fri Mar 11, 2005 3:48 am    Post subject:  

Also Butthead, checkout Donaldshobby

I buy servos from there and they are ultra cheap and brand new.

The HS-5745MG Giant Digital Servo - Universal (HRCM4645)
List Price: $115.99
Our Price: $69.99
You Save: $46.00 (40%)

Click here for HS-5745MG

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Fri Mar 11, 2005 4:24 am    Post subject:  

wow, thanks darreck! im ordering them tonight!
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Fri Mar 11, 2005 4:27 am    Post subject:  

O YEAH, IS IT NECESSARY TO GET A PROGRAMMER FOR THESE SERVOS?
oops sorry for caps Rolling Eyes

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Fri Mar 11, 2005 10:25 am    Post subject:  

Butthead wrote:
O YEAH, IS IT NECESSARY TO GET A PROGRAMMER FOR THESE SERVOS?
oops sorry for caps Rolling Eyes


I didn't program mine (5645MG), but I don't have a gaint scale either. I think if you have more than one servo on a control surface you need to program so they don't fight each other.

Derrick (DTB)

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Fri Mar 11, 2005 1:06 pm    Post subject:  

anything is possible...i have seen every kind of servo have problems...and i wouldn't believe #### people say on rcu like 99% of the people are biased and don't say what they really feel just go on with the majority of people.
_________________
-Chris-
3D Foamy
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Fri Mar 11, 2005 1:22 pm    Post subject:  

Chris wrote:
anything is possible...i have seen every kind of servo have problems...and i wouldn't believe #### people say on rcu like 99% of the people are biased and don't say what they really feel just go on with the majority of people.


AMEN....

That is one reason I don't visit that site that much anymore. Too much garbage to dig through to get the truth or something remotely close to it.

DTB

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Fri Mar 11, 2005 5:35 pm    Post subject:  

I have never had problems with JR, but Hitec on the other hand, I wouldnt wast my money anymore. The only Hitecs that I would trust to anything that moves are the 645's and the micros. being evil

I recently had Futaba rudder servos strip out for nothing, almost cost me the plane. The gear trains are just too weak or something.

Just an FYI, heres some threads on bulletproof Hitec servos Rolling Eyes

http://www.rcuniverse.com/forum/m_2251971/anchors_2251971/mpage_1/key_8411%252Cfailure/anchor/tm.htm#2251971

http://www.rcuniverse.com/forum/m_2067402/anchors_2067402/mpage_1/key_8411%252Cfailure/anchor/tm.htm#2067402

http://www.rcuniverse.com/forum/m_2005676/anchors_2005676/mpage_1/key_8411%252Cfailure/anchor/tm.htm#2005676

http://www.rcuniverse.com/forum/m_2002711/anchors_2002711/mpage_1/key_8411%252Cfailure/anchor/tm.htm#2002711

http://www.rcuniverse.com/forum/m_1417640/anchors_1417640/mpage_1/key_8411%252Cfailure/anchor/tm.htm#1417640

http://www.rcuniverse.com/forum/m_1801220/anchors_1801220/mpage_1/key_8411%252Cfailure/anchor/tm.htm#1801220

http://www.rcuniverse.com/forum/m_1798489/anchors_1798489/mpage_1/key_8411%252Cfailure/anchor/tm.htm#1798489

http://www.rcuniverse.com/forum/m_1459601/anchors_1459601/mpage_1/key_8411%252Cfailure/anchor/tm.htm#1459601

http://www.rcuniverse.com/forum/m_1417706/anchors_1417706/mpage_1/key_8411%252Cfailure/anchor/tm.htm#1417706

http://www.rcuniverse.com/forum/m_1404737/anchors_1404737/mpage_1/key_8411%252Cfailure/anchor/tm.htm#1404737

http://www.rcuniverse.com/forum/m_1335425/anchors_1335425/mpage_1/key_8411%252Cfailure/anchor/tm.htm#1335425

http://www.rcuniverse.com/forum/m_1152167/anchors_1152167/mpage_1/key_8411%252Cfailure/anchor/tm.htm#1152167

See for yourself, as this was just on the first page of the search.

And I am still screwed from my personal experiences. At Bayside, my friend Jim (an awesome heli pilot) has had around 30 Hitecs, and had 1/3 of them fail.

I would get the newer ones (they seem to be OK) but as for the older ones, you'll find out sooner or later when you have a plane in 100's of little splinters.

_________________
Lower??!!
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Fri Mar 11, 2005 6:02 pm    Post subject:  

i can't seem to notice all of those threads are from rcu where JR servos, comp-arfs, and DA engines are gods to them. And since it's RCU i wouldn't believe a word or it. I know a guy wiht a 38% Yak and a 35% Edge all hitecs no problems, his buddy only flies GS and has over 10 GS models 35% and up all hitecs no servo failures yet. Although the second guy just in the last two yrs sold all his other servos when he has a big cessna go down thanks to JR servos...it happens to all of em.
_________________
-Chris-
3D Foamy
Back to top  
craigman



Joined: 31 May 2004
Posts: 105
Location: Redding, CA

PostPosted: Fri Mar 11, 2005 7:03 pm    Post subject:  

I'd use the 5945's or 5645's. Bitch'n servos.
The newer 5645's don't have any issues anymore. It was some older ones with a certain build date.
Here's a like about them: http://www.hitecrcd.com/Support/servostatement.htm

I've been running Hitechs for over 3 years now. All the way from funfly's to GS. BUT, i take the time and set them up correctly. ANY servo can fail. Some more than others. It just "seems" like more Hitechs fail,, and it's because for every 1 Futaba or JR, there's about 5 Hitechs sold. So naturally it going to "seem" like they fail alot.

Disregaurd about 95% of what you read on RCU. There's thread on Futaba, JR, Hitech, Airtronics all failing in some shape, way, or form. And it's usually idiots that write those treads. Do a search on JR 8411's,,, there all kinds of threads about their geartrain slop. Their ALL great servos as long as you take your time and set them up correctly.

Good luck one whatever you choose! Like i said,, their ALL great products!
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Fri Mar 11, 2005 9:18 pm    Post subject:  

Just about every digi and analog Hitec servo I have had has failed. One servo on throttle locked hard over, the plane was just about ready to plow through all the other planes on the ground.

Every servo on my Extra (all Hitec digitals) failed, either locked hard over, or started to wig out in the air. I can't count how many times I've almost lost planes cause of it.

Futaba on some of my funflys would strip the output shaft, or on the metal geared servos the small plastic gear thats supposed to be some sort of fail safe, did just that, failed, and gear debris went all inside the servo, messing up everythig. Some fail safe cause I was just about to do a roll to knofe edge right when the plane left the ground. It saves your servo, but not your plane. Rolling Eyes

Ask Jim Mcqueen, he lost a DP Edge and a Comp-Arf 330l with 5945's locking hard over.

At bayside a loooong while back, I remember Steve's NoLimit piling cause a servo went to wig out city and the plane then locked out.

Have you guys seen a JR or Futaba servo lock hard over the way these do?

What about this, brand new servos only 3 flights on them, and they fail. I don't think I will fly that plane again in a long time because I wasted $250 and could have wasted the whole plane.

There's a definite reason behind this stuff, and are the people on RCU lying about their planes wadding up? I don't think so.

Be careful which ones you buy, older ones=splinters, and newer ones might work well.

The reason why a lot of people buy them is the price. But with these, you get whta you pay for. Where did their quality go?

Check this out, hundreds of hours of work, and a turbine down the drain..

http://www.rcuniverse.com/forum/605BB_Causes_Big_Loss/m_1140706/tm.htm

_________________
Lower??!!
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Fri Mar 11, 2005 10:04 pm    Post subject:  

if you've had all those probs why'd you keep buying more.....IMHO i think you were/are doing something wrong. no offence.
_________________
-Chris-
3D Foamy
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Sat Mar 12, 2005 1:34 am    Post subject:  

Those threads werent mine, but as I said above, mostly the majoritu of them that I own stopped working. Beats me why, they were on 4.8 volts with nothing special. The newer ones are great, but the mini digitals like to stop working and the other older generation Hitecs locked on me.

Just FYI, I am not trying to be biased, I will still buy the newer ones, they are a good buy for the price. Beware of which ones you get, as some like to burn up their potentiometers and quit or the motors lock.

_________________
Lower??!!
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Sat Mar 12, 2005 1:44 am    Post subject:  

You've also got to figure that Hitec sell about six times as many servo's as anyone else, so you're gonna hear of more problems just because there's huge amounts more of them out there compared to their competitors.

Having said that, the only Hitec servo's I've ever used are two 605 MG and two 700's and they're still okay after three years in a 1/4 CAP 21.

_________________
Ya torkin' ta me?
Back to top  
JMarden



Joined: 29 Jan 2005
Posts: 58
Location: Merrick, NY, USA

PostPosted: Sat Mar 12, 2005 2:14 pm    Post subject:  

Never had a problem with ANY of my Hitecs, until i put the battery without a reg through them.. laughing But seriously, i have run over 5 5945's, about 10 5625's, about 5 5625's, and A bunch of analog and minis...ALL of these have been put through alot as well..I am a good customer of hitec and will remain one..But don't take it wrong, i have run JR's and Futabas too..they all work fine..Alot of failures by the way are caused by improper linkage, hinging, big gaps that arent sealed, flutter.. My next plane will be outfitted with hitecs everywhere..5645's, 5945's 5735's,...and i don't think i will have a problem. Just my experiance.
_________________
-Jared Marden

www.3dfoamy.com
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sat Mar 12, 2005 2:33 pm    Post subject:  

ok, i just got servos and here is my setup:
wing panels: 2 8611's each (channels 1 and 6)
stabs: 1 8611 each (channels 2 and 5)
rudder: 1 5955TG hitec (plane did a knife edge loop on a single 8611 in video) (channel 4)
throttle and choke: S3004 (channels 3 and 7)
no matchboxes or equilizers(old school way with just a Y harness)
PCM 9 channel reciever channel 42


PS- Chris Maier helped me pick out servos for the rudder and he sed it would be more than enough so theres double proof here!)

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sat Mar 12, 2005 4:13 pm    Post subject:  

Yep. That is even a little overkill on the ailerons IMO. But that can't be fixed anyway because the servo holes are pre-cut. Confused
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sat Mar 12, 2005 4:25 pm    Post subject:  

yeah, i was gonna use 9411's but my dad traded me for 8611's so..
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Sat Mar 12, 2005 5:12 pm    Post subject:  

bettr overkill then not enough IMHO
_________________
-Chris-
3D Foamy
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sat Mar 12, 2005 5:54 pm    Post subject:  

Yeah, but one 8611 is for sure enough though. And it is extra weight. sly wink
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sat Mar 12, 2005 6:16 pm    Post subject:  

yeah but if i only put one on i would have an awkward amount of tork going to only one half of the aileron. the other half would twist and bend.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sat Mar 12, 2005 6:20 pm    Post subject:  

I wrote:
Quote:
But that can't be fixed anyway because the servo holes are pre-cut.


Yeah.... I know. laughing Razz
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Mar 13, 2005 5:46 am    Post subject:  

LOL... "i wrote" < funny stuff tom. haha
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sun Mar 13, 2005 10:14 am    Post subject:  

big grin Rolling Eyes laughing laughing
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Mon Mar 14, 2005 6:02 pm    Post subject:  

The fact that they sell more of them shouldn't justify them to fail brand new or in the air, causing disaster. I've had equal amounts of JR and Futaba and none have stopped working. The gear trains on the Futabas break cause there is a tiny plastic gear on them. (even they are metal gear) One input and there went the rudder.

I personally have never seen such failure until I bought Hitec. being evil

_________________
Lower??!!
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive