| |
| Author |
Message |
3D-kid330

Joined: 14 Nov 2004 Posts: 391 Location: Fremont, CA
|
Posted: Wed Mar 23, 2005 8:17 pm Post subject: Best 40% and up plane? |
|
|
Hey guys,
I've been looking around out of curiosity and I was wondering what would be the best 40% or larger plane.
I have noticed that Carden is great but extremely expensive, ACM looks cool, but would be too big for a 150 I think(52%), I don't know too much about the Aerotech stuff, Aeroworks looks good, but not too sure on the quality.
So, in your opinion, what is the best value? Is it worth paying that much more for a Carden or CompArf?
If I were to get one, I would get an Edge, IMO they are the best flying planes out there.
One last thing, I see that some larger Edges have wing rock. It looks very manageable, so it might be just CG location.
As for equipment, my ideal setup would be DA or 3W 150 or larger, all 8611 servos, JR dual conversion PCM 10 ch rx's, my trustee 9303, Duralite Powerbox, Duralite Li-Ion Powerbox batts.
What do you guys think is the best plane and setup?
(As you can see I'm being curious again )
Thanks,
Brandon
_________________ Lower??!!
Last edited by 3D-kid330 on Fri Mar 25, 2005 12:12 am; edited 1 time in total |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 1316 Location: Fremont, CA
|
|
| Back to top |
|
 |
3dav8r

Joined: 25 Apr 2004 Posts: 28 Location: Salinas,Ca
|
Posted: Wed Mar 23, 2005 11:13 pm Post subject: |
|
|
I am flying a AeroWorks 39% Extra and it is a fantastic flying airplane, not overly impressed with the wood in the kit but it went together just fine. My new airplane is the Dalton Extra 260, this airplane is over the top perfect! I bought the ARC version and the quality of workmanship is second to none. It is a very light airplane and from what I've seen is an excellent flyer. All my planes in the future will be from Dalton Aviation!
www.daltonaviation.com
|
|
| Back to top |
|
 |
JR.Master

Joined: 07 Nov 2004 Posts: 462 Location: San Angelo
|
Posted: Thu Mar 24, 2005 5:40 am Post subject: |
|
|
Aerotechs building quality is awesome they're extremely strong and almost built like carden. Check this out aerotechs 52% Extra 300XS. I'd hate to crash it wouldn't you
| Description: |
|
| Filesize: |
16.33 KB |
| Viewed: |
388 Time(s) |

|
_________________ Did I do that? Hummmmmm!Yep, sure did! |
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Thu Mar 24, 2005 10:55 am Post subject: |
|
|
THAT looks like a true 52%. unlike bill hempel's pitts how it looks real small. or his edge, wasnt too big. that is an absolute MONSTER!! you would need the new ZDZ 420 for that biatch!
_________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
3D-kid330

Joined: 14 Nov 2004 Posts: 391 Location: Fremont, CA
|
Posted: Thu Mar 24, 2005 1:08 pm Post subject: |
|
|
Yep, that's big. Bills Edge was about that big, but they didn't show it in it's nose. You would need the 3W 648 for that.
You guys seen the ACM 52% Edge? It's on Bill's website.
It looks like the DP, TBM, and Aerotech are all great quality. Any others that you guys know about that we haven't included?
Also, what do you guys think about as far as engine? DA, 3W, ZDZ, BME?
Keep the comments coming
Brandon
_________________ Lower??!! |
|
| Back to top |
|
 |
JR.Master

Joined: 07 Nov 2004 Posts: 462 Location: San Angelo
|
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Thu Mar 24, 2005 1:56 pm Post subject: |
|
|
soooo, why not "larger"?
_________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
JMarden
Joined: 29 Jan 2005 Posts: 58 Location: Merrick, NY, USA
|
Posted: Thu Mar 24, 2005 3:57 pm Post subject: |
|
|
Hey Brandon, Where do you fly? Maybe we can meet up some where. I just noticed now that your in queens, NY. I'm out here in Nassau County. My friend in CT had a DP Edge and a DA-150 and he loved it. I have videos of it somewhere.
_________________ -Jared Marden
www.3dfoamy.com |
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Thu Mar 24, 2005 4:07 pm Post subject: |
|
|
i believe hes just visiting queens. if not, then swing down to Regalsville or Belvidere, NJ sometime bro!
_________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 1316 Location: Fremont, CA
|
Posted: Thu Mar 24, 2005 4:57 pm Post subject: |
|
|
Brandon, are you telling me you left Sunny California for Snowy New York? How Sad!!! :mrgreen:
_________________ --Meyrick-- |
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Thu Mar 24, 2005 5:07 pm Post subject: |
|
|
i sure hope he moved to queens(you gotta like the Mets now, HAHA) because then i will have a friend who actually flies model airplanes!! everyone thinks im a geek here because i fly em. LOL
_________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
3D-kid330

Joined: 14 Nov 2004 Posts: 391 Location: Fremont, CA
|
Posted: Thu Mar 24, 2005 9:15 pm Post subject: |
|
|
LOL
As far as leaving Cal for NY, It was atually beautiful weather in NY, and pooring rain when we came back in Ca. Whats wrong with this picture?
Flying through a storm the whole time too, so you had to watch your drink to keep it from spilling over though. United has awesome service. (my dad works for them too)
John and Jared,
I'll be back in NY in July so I might be able to swing down and maybe fly something if I can lug a plane over.
I'm back now, but I forgot how to change it back.
So, as far as the DP Edge goes, it looks like a winner with price and what I've seen.
So any 150cc would work great in one?
Also, I've seen used engines and planes out there. Is it okay to get one like this (used) or is it better off going new? (I kinda like the smell of new airplane )
_________________ Lower??!! |
|
| Back to top |
|
 |
ryan

Joined: 13 Dec 2004 Posts: 147 Location: North Carolina
|
Posted: Thu Mar 24, 2005 9:32 pm Post subject: |
|
|
I would say wait until you are actually going to buy one before you start shopping around. For all that any of us knows, the next "best" thing hasn't been designed or built or released to the public yet.
You also have to assess yourself to see whether or not you are ready for one. Do you think that you are a sufficiently proficient modeler to be able to own one? Notice I didn't say pilot. Those are almost two different things. If not, are there people that you know that can help you out? A 40% airplane is a big investment and it's vital that you use the highest quality products in it that you can, otherwise you are posing a safety hazard for not only yourself, but also for those around you. It will also pay off in the long run, the results being better performance, and more precision.
That said, I'm partial to Carden's myself, although you may want to give QQ's Yaks a try.
But otherwise... Pick one and go for it. If you're really serious about it, everything will fall into place.
_________________ Ryan |
|
| Back to top |
|
 |
JMarden
Joined: 29 Jan 2005 Posts: 58 Location: Merrick, NY, USA
|
Posted: Fri Mar 25, 2005 11:47 am Post subject: |
|
|
i have a video of hovering and harriers with the DP Edge if you wanna see it..I just have to send it to my FTP and hope the bandwith lasts...
_________________ -Jared Marden
www.3dfoamy.com |
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 639 Location: Belvidere, NJ
|
Posted: Fri Mar 25, 2005 11:50 am Post subject: |
|
|
if you have aim, im on and you could just send me the file _________________ "get outta there beavis i want the window seat!!!" |
|
| Back to top |
|
 |
3D-kid330

Joined: 14 Nov 2004 Posts: 195 Location: Queens, NY
|
Posted: Fri Mar 25, 2005 3:47 pm Post subject: |
|
|
Yeah, that would be cool to see it.
Ryan hit the nail on the head. I've seen people put a standard servo on a jet. Not too good.
I think I am proficient, but there is always Meyrick, Zak, Steve, Mickey and all the 3DBatix crew over here, so I guess I could probably use their help with setting one up.
And it's probably not going to be right now that I get one, just a little further down the road when I acquire the equipment for one. I like to shop around for good deals on good equipment so I can save money and not skimp on equipment.
Brandon _________________ Lower??!! |
|
| Back to top |
|
 |
ryan

Joined: 13 Dec 2004 Posts: 49 Location: North Carolina
|
Posted: Fri Mar 25, 2005 8:32 pm Post subject: |
|
|
That's understandable Brandon.
I am leery of used props, unless it's someone's prop that you know personally. I am also leery of recievers and engines as well. Unless you have seen either of the three in person, I would steer away from it.
But yes you can buy used, there are a lot of good used products out there, just shop smart. Good luck with it. _________________ Ryan Smith |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 731 Location: Sunnyvale, CA
|
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 982 Location: Fremont, CA
|
Posted: Fri Mar 25, 2005 11:19 pm Post subject: |
|
|
| 3dbatixkid wrote: | | Brandon, youre gonna need more than a Honda CRV to get a 40% to the field... |
LOL.. Just tie it up on top of the car....  _________________ --Meyrick-- |
|
| Back to top |
|
 |
| 2 posts after this were not archived |
| |