ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Twin Elevator servo's on 7C?
15 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Fri Apr 01, 2005 12:58 am    Post subject: Twin Elevator servo's on 7C?  

Is there a way to set up twin elevator servo's on the Futaba 7C. I tried all the PMX's but just end up with half rotation on the slave. Am I missing something?

Don't really want a "Y" lead and reverser in there.

_________________
Ya torkin' ta me?
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Apr 01, 2005 7:49 am    Post subject:  

You can but the trim will only work for one of the servos. Your best solution is to get the equilizer II. You can match center, end points, and reverse the other servo.
_________________
--Meyrick--
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Fri Apr 01, 2005 11:30 am    Post subject:  

So you use a "Y" lead and one goes via the equalizer?
_________________
Ya torkin' ta me?
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Apr 01, 2005 11:39 am    Post subject:  

Nope, you don't need a Y. The Equalizer connects to the elevator channel and the other end of the Equalizer will have two channels for the two elevator servos. The Equalizer itself acts like the Y cable but has the ability to reverse a channel and match center points and end points. Here is the products link
http://www.smart-fly.com/Products/EqualizerII/equalizer.htm

_________________
--Meyrick--
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Fri Apr 01, 2005 12:17 pm    Post subject:  

Thanks Meyrick, that's a good device. Just gotta find one in the UK now frown or I could just give up and use my 9C Rolling Eyes

Just tryin to keep my 9C free of oily gunk, petrol only. sly wink

_________________
Ya torkin' ta me?
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Fri Apr 01, 2005 12:22 pm    Post subject:  

Hey! How did that happen? Triple postage!

Gotta stop repeatin' myself...

_________________
Ya torkin' ta me?
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Apr 01, 2005 1:07 pm    Post subject:  

Gezoid wrote:
Hey! How did that happen? Triple postage!

Gotta stop repeatin' myself...


Cleaned it up for ya.

_________________
--Meyrick--
Back to top  
Btaff



Joined: 28 Dec 2005
Posts: 8
Location: Fairfield, CA

PostPosted: Wed Dec 28, 2005 2:47 pm    Post subject: Equalizer II question  

I have just purchased a F90 and am running two Hitec 5945 metal gear servos to the elevator. The radio I'm using is a Futaba 7C. Following the post from Meyrick I will need to use an Equalizer. I have followed the link Meyrick posted and it seems like an ideal unit for my dilemma.

What I'm after is a little more feedback on this unit. Has anyone used it? Is it good quality and work as advertised?

Thanks in advance for any help you can provide. smile

_____________________________________________________________

Nope, you don't need a Y. The Equalizer connects to the elevator channel and the other end of the Equalizer will have two channels for the two elevator servos. The Equalizer itself acts like the Y cable but has the ability to reverse a channel and match center points and end points. Here is the products link
http://www.smart-fly.com/Products/EqualizerII/equalizer.htm
_________________
--Meyrick--
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Wed Dec 28, 2005 4:59 pm    Post subject:  

You can be assured, anything from smart-fly kicks ass. 3dbatixkid on here is sponsored by them as well. I will be using their fiber optic ignition kill in my new 35% panzl, and I might also use the power expander.
_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Wed Dec 28, 2005 6:07 pm    Post subject:  

Btaff,

I have used Smart-Fly for quite a while now. Their products are AMAZING. I will never use anything else in their place. The customer service cant be beat either. Surprised

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Btaff



Joined: 28 Dec 2005
Posts: 8
Location: Fairfield, CA

PostPosted: Wed Dec 28, 2005 7:44 pm    Post subject: Thanks for the reply  

Thanks guys. I'm making the jump into more advanced planes and forums like this are awesome.

Looks like the smart fly equalizer is the way to go for my application in the F90.

Brendan
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Wed Dec 28, 2005 8:47 pm    Post subject:  

I did the same thing in my Funtana, worked great. Cool
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Thu Dec 29, 2005 2:59 pm    Post subject:  

Well, I gave up tryin to get an Equalizer over here, I just couldn't wait to get her finished so I used a 6 swg wire joiner and single servo, same as on the F40 but thicker! I skinned over the inboard bit of the elevators with 1/32nd ply. Works good and weighs about the same as the extra servo I would've used. Nowadays you can get the Equalizer here no prob's. Anyway, it's an option...


Img_0042.jpg
 Description:
 Filesize:  43.25 KB
 Viewed:  105 Time(s)

Img_0042.jpg



Img_0040.jpg
 Description:
 Filesize:  38.35 KB
 Viewed:  105 Time(s)

Img_0040.jpg



Img_0038.jpg
 Description:
 Filesize:  27.21 KB
 Viewed:  105 Time(s)

Img_0038.jpg



Img_0037.jpg
 Description:
 Filesize:  44.56 KB
 Viewed:  105 Time(s)

Img_0037.jpg



_________________
Ya torkin' ta me?
Back to top  
Btaff



Joined: 28 Dec 2005
Posts: 8
Location: Fairfield, CA

PostPosted: Sat Dec 31, 2005 4:02 pm    Post subject:  

Looks good. Let us know how it performs in the air.

BTW, what servo are you using for the elevator?
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 161
Location: UK

PostPosted: Sun Jan 01, 2006 1:51 am    Post subject:  

It's been flying since April with no probs. Servo is a Futaba 9151 I had spare.
_________________
Ya torkin' ta me?
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive