ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Flight time
16 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
Jynx13



Joined: 06 Jan 2005
Posts: 45

PostPosted: Wed Apr 13, 2005 9:14 am    Post subject: Flight time  

Hey guys,
I just finishe my Foamtana and stuck my Hi-max 2812-0850 ont it with a 12x6 gws prop. I have 4 TP 1320's and i am only getting 8 minutes of flight time. That is only hovering for about 3 minutes and the rest is just lazying around with rolling harriers and inverted harriers. Arent you guys getting 12-14 min of flight time?

BTW my AUW is 15.8oz. Is that my problem?

Thanks
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1082
Location: Sunnyvale, CA

PostPosted: Wed Apr 13, 2005 9:47 am    Post subject:  

The weight shouldnt be a prob. You might have the voltage cutoff set too high on the speed control. Also, you might want to try using a 12x8 GWS prop. I have found this to be a great prop because it has a lot of thrust at low RPMs where the outrunner motors have a lot of tork. You might not notice it, but you may be using more power just to hover than you think. Also, with the 12x8 when you throttle up, the blades flatten out a bit so that it doesnt pull too many amps.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Jynx13



Joined: 06 Jan 2005
Posts: 45

PostPosted: Wed Apr 13, 2005 10:05 am    Post subject:  

Thanks
Im gonna give that prop a try. I am using a CC 25. What should the voltage cut off be set at?

Thanks again
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1310
Location: Fremont, CA

PostPosted: Wed Apr 13, 2005 9:10 pm    Post subject:  

Jynx13 wrote:
Thanks
Im gonna give that prop a try. I am using a CC 25. What should the voltage cut off be set at?

Thanks again


I left mine at the default setting of 6.0volts.

_________________
--Meyrick--
Back to top  
redryder



Joined: 09 Apr 2005
Posts: 26
Location: Melbourne, Australia

PostPosted: Thu Apr 14, 2005 4:02 am    Post subject:  

I'm interested to know what the 2812-850 pulls with a 12x6 prop on 4s. I'm guessing it's a bit over 15A. The 12x8 would be even higher, I'd think.

red
Back to top  
Jynx13



Joined: 06 Jan 2005
Posts: 45

PostPosted: Thu Apr 14, 2005 4:07 am    Post subject:  

I dont know how to program this thing really. I just pluged it in and flew it.
I tried a j12x8 and i got the same flight times. I must have something wrong somewhere.

Thanks
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1310
Location: Fremont, CA

PostPosted: Thu Apr 14, 2005 4:51 am    Post subject:  

Also how often are you on full throttle?
_________________
--Meyrick--
Back to top  
Jynx13



Joined: 06 Jan 2005
Posts: 45

PostPosted: Thu Apr 14, 2005 9:15 am    Post subject:  

I never went full throttle. My last flight i just hovered for about half flight and then i just flew around in a slower harrier. I thought it was the battery at first but it does it with all my 1320's and i have 5 of them. Im gonna try another speed control and see if that helps.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1310
Location: Fremont, CA

PostPosted: Thu Apr 14, 2005 9:23 am    Post subject:  

Does it do a hard cutoff or the motor just slows down a bit?
_________________
--Meyrick--
Back to top  
Jynx13



Joined: 06 Jan 2005
Posts: 45

PostPosted: Thu Apr 14, 2005 9:56 am    Post subject:  

The motor just starts loosing power. I just tested it in the house because its too windy outside now. I held the throttle at half so the motor would be pulling it about hover speed, i decreased it and increased it and never went above halft throttle and i got 7.5 minutes. This is with the second speed controller. I also hear a clicking sound in the motor when i just start to idle it up but there is no resistance in it and it turns fine.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1310
Location: Fremont, CA

PostPosted: Thu Apr 14, 2005 10:06 am    Post subject:  

Hmm, that is weird. I get an average of 11 minutes with my Diablo at 14.5oz.. How are you mounting your prop? Directly or with the prop saver? Also what kind of charger are you using? If you are using the Triton, that could be the problem also.
_________________
--Meyrick--
Back to top  
Jynx13



Joined: 06 Jan 2005
Posts: 45

PostPosted: Thu Apr 14, 2005 10:17 am    Post subject:  

11 minutes. Well that gives me something to shoot for. I am using it direct drive and i am using a hobbico mkII charger. I never thought that the charger could be the problem. I have another charger im gonna try and see if that helps.

Thanks Bro
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1310
Location: Fremont, CA

PostPosted: Thu Apr 14, 2005 10:31 am    Post subject:  

Jynx13 wrote:
11 minutes. Well that gives me something to shoot for. I am using it direct drive and i am using a hobbico mkII charger. I never thought that the charger could be the problem. I have another charger im gonna try and see if that helps.

Thanks Bro


Yeah I"m not sure about that charger but it could be false peaking. The Triton peaks at 80%~90% of the battery's capacity. I use Thunderpower chargers and works awesome.

_________________
--Meyrick--
Back to top  
Jynx13



Joined: 06 Jan 2005
Posts: 45

PostPosted: Thu Apr 14, 2005 10:56 am    Post subject:  

Meyrick,
thanks for the help! I have a bat charging right now on another charger. I will post the results when its done.

Thanks again
Back to top  
Jynx13



Joined: 06 Jan 2005
Posts: 45

PostPosted: Sat Apr 16, 2005 10:20 am    Post subject:  

That worked. I charged my bats with another charger and with 3 of my bats i am getting 12-14 min flight time with a 12x8 direct drive prop.

2 of my bats are only giving about 7-8 minutes time so i think there is something wrong with them.

Thanks again
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1286
Location: Fremont, CA

PostPosted: Sat Apr 16, 2005 7:12 pm    Post subject:  

Right on bro. Send those bad packs back and they are pretty good at helping you out. The worse thing they can do is replace your bad packs for half price if they are out of warranty.
_________________
--Meyrick--
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive