ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

What type of glue for foamy?
13 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
craigman



Joined: 31 May 2004
Posts: 105
Location: Redding, CA

PostPosted: Fri May 06, 2005 10:33 pm    Post subject: What type of glue for foamy?  

Hey fellas,
what type of glues are you using to put together you foamies?
Gorilla? CA? Epoxy? Hot glue?

Let me know the pro's and con's?

Thanks!
Back to top  
Colin



Joined: 08 Jun 2004
Posts: 25
Location: Canada

PostPosted: Sat May 07, 2005 3:13 am    Post subject:  

CA's probably the lightest, but I love the ease of hot glue.

Colin

_________________
Great Hobbies
Thunder Tiger
Morgan Fuels
HobbyCraft Canada
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Sat May 07, 2005 5:58 am    Post subject: Re: What type of glue for foamy?  

craigman wrote:
Hey fellas,
what type of glues are you using to put together you foamies?
Gorilla? CA? Epoxy? Hot glue?

Let me know the pro's and con's?

Thanks!


I used Foam safe CA and J&Z ZR/C-56 (canopy glue) and Epoxy for my foamy construction and used hot glue to install the servos.

1) Gorilla glue would work but I wouldn't use it for a foamy. It takes a long to cure and expands a lot which would make a mess over yout new foamy.

2) Regular CA may melt the foam, but not all do.

3) Epoxy works great and is strong, but is heavy. I did use it for the motor mount glue.

4) Hot glue works good for servo mounting, but I wouldn't use it to put a plane together.

Click the link in my signature, then go to my RC page and there is a construction album for my foamy which shows some items that were used.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Sat May 07, 2005 8:28 am    Post subject:  

I use Zap-o. I find it to be the lightest and fastest, but mostly just my personal preference. www.darrolcady.com has some really cool aerosol kicker that is a real kick in the pants to use embarrassment
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
craigman



Joined: 31 May 2004
Posts: 105
Location: Redding, CA

PostPosted: Sat May 07, 2005 7:41 pm    Post subject:  

Thanks guys!
Yeah,, i'm learning this Gorilla glue is a real pain to work with. It comes gooping out everywhere while it dries. I made a real mess... Oh well,, just have to make the best of it...
Back to CA for me!
Back to top  
FarNorth3DFlier



Joined: 02 Jun 2005
Posts: 7
Location: North Pole, Alaska

PostPosted: Fri Jun 03, 2005 9:36 am    Post subject:  

Gorilla glue is a great glue light and strong and works great on foam and fills in spots you might have missed, have been using this type for years but the elmer brand same thing, takes a little practice. When using it on a wing spar slot, dampen the inside of grove wipe dry the top not inside and apply blue painters tape to the both edges of the grove, this will protect the foam from excess glue, clean excess every 5 minutes or so with rubbing alcohol will foam up about 3 times in about 40-60 min or when the glue is still a little tacky and not foaming pull off the tape glues not all over the wing, putt wax paper over wing and your books or weights and let finish drying a few more hours done, strong light wing. It really is a good glue and I bet you could build about 30 planes with a 4oz bottle. I did a test a couple weeks ago on a 37" Cap 232 wing with a 4mm spar with Goriila glue and bent the wing into a 3/4 circle without any damage or comming lose anywhere.
Back to top  
Koolblu



Joined: 13 Dec 2004
Posts: 3
Location: Greensboro,Pa.

PostPosted: Wed Jul 06, 2005 8:49 am    Post subject: Glue?  

If you don't mind waiting, I use R/C 56. I even attach servos with the stuff. Works great for me.
Back to top  
rhelfrich



Joined: 22 Dec 2004
Posts: 4

PostPosted: Mon Aug 15, 2005 8:27 pm    Post subject:  

i use low temp hot glue for the entore assembly and repairs. it seems more flexable than ca on EPS Expanded polystyrene.
Back to top  
bnrusso



Joined: 05 Oct 2005
Posts: 2
Location: Fox Lake, IL and Kingman,AZ

PostPosted: Wed Oct 05, 2005 10:10 pm    Post subject:  

I agree with FarNorth3DFlier that polyurethane glue is great. It certainly is not fast, but STRONG. I can apply it with a metal pick and get only a tiny amount of foaming gap fill. If there is excessive foaming I can wipe it away or press it down before it fully dries. I have repaired balsa, plywood, foam, used with an acid brush for fuelproof painting glow plane firewalls and tank compartments. It seems to stick anything to anything. After I bent a 2 mil vertical foam strut between the 2 wings of my foamy bipe ( The trunk bracket of my Saturn did it), I finger rubbed it on both sides of the bent strut. It gave it a glass smooth coating that is just as strong as the original. I wipe a thin coat around the edges for ding strength.
For building with speed CA or Hot glue. If you do a little each nite, Elmers polyurethane available at walmart under $7 for 8 oz?

_________________
Being retired is just like being a kid again. More time than money, I hope!
Back to top  
wvl



Joined: 01 Aug 2005
Posts: 6
Location: Belgium - Oostrozebeke

PostPosted: Fri Oct 14, 2005 11:20 am    Post subject: pu forever  

I also tend to use PU glue (poly-urethane). It is the strongest glue around, takes some time to cure though. But it foams and fills small gaps, with CA forget that.
A small hint: if you mix a smal bead of glue with just one drop of water, it will foam easier, so less glue required, keeping the weight down. it also cures faster when mixed with water.(just one drop!)
One thing I don't like about PU is the horrible colour. it starts yellow-brown, but over time it gets like darker brown. you'll see all the joints appear. I use white wood glue where estethics are important. (the water proof kind of wood glue). This glue dries transparent.

_________________
flying is not dangerous; crashing is.
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Fri Oct 14, 2005 12:46 pm    Post subject:  

last time i used aerosol kicker on a foamy it ate it...

3dbatixkid wrote:
I use Zap-o. I find it to be the lightest and fastest, but mostly just my personal preference. www.darrolcady.com has some really cool aerosol kicker that is a real kick in the pants to use embarrassment

_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
ace dogfigter



Joined: 23 Oct 2005
Posts: 10
Location: belgiun

PostPosted: Sun Oct 23, 2005 11:20 am    Post subject:  

PU is the best but its ugly yellow and bubly i use quick woodglue its les visible and it hards faster
Back to top  
foamfreak



Joined: 05 Nov 2005
Posts: 12
Location: central wi.

PostPosted: Sat Nov 05, 2005 6:27 am    Post subject: glue on foam  

Handibond thick works great, it is foam safe,, ive used it on 10 foamies now, make sure you use foam safe kicker !
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive