ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Hobby Lobby Yak 55
19 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
Radioflyer



Joined: 14 Sep 2004
Posts: 325
Location: Kalamazoo, MI

PostPosted: Sat May 14, 2005 5:54 pm    Post subject: Hobby Lobby Yak 55  

This is Hobby Lobby's Yak 55. It seems to be a nice foamy for the price, $19.90 a plane, so I got all four colors :mrgreen: . I put the first one together and it seems to have good quality. It will have a 370 Eflight motor, Castle 10amp, and Thunder Power 900mah-3 cell batt. The only thing holding me back on flying it is the devistation of my Tensor. With the way I fly it could be pretty soon Rolling Eyes laughing Has anyone else flown one of these Question


IMG_0908.JPG
 Description:
 Filesize:  68.74 KB
 Viewed:  759 Time(s)

IMG_0908.JPG



_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sat May 14, 2005 5:58 pm    Post subject:  

Havn't flown or seen one...but I really like it! big grin
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1048
Location: Belvidere, NJ

PostPosted: Sun May 15, 2005 5:00 pm    Post subject:  

so, is it done yet? if not, tell us how it flies when you are done. i am VERY interested in this plane!
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 325
Location: Kalamazoo, MI

PostPosted: Mon May 16, 2005 6:00 pm    Post subject:  

I won't fly this one until I smash my Tensor, which I don't want to do. I got them because of the price. It looks like it will do pretty well. Everything is laminated with two pieces of depron, not just a single piece so I think it will be stronger. It also came with all of the hardware, although I don't have alot of experience with foamies to tell you if it is quality stuff or not. I will let you guy's know how it does though big grin
_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
slowracing



Joined: 18 Apr 2005
Posts: 26
Location: Williamsburg, VA

PostPosted: Tue May 17, 2005 12:20 am    Post subject:  

I bought one of these also. Looks pretty nice for the money. I picked up the Esskay 400XT Outrunner Brushless from them too...$29.00 was hard to pass up smile Seems like it should be a good package!?!?
_________________
www.sloweracing.com
www.octaneonline.com
Back to top  
slowracing



Joined: 18 Apr 2005
Posts: 26
Location: Williamsburg, VA

PostPosted: Tue May 31, 2005 12:53 pm    Post subject:  

Butthead wrote:
so, is it done yet? if not, tell us how it flies when you are done. i am VERY interested in this plane!



Well mines done, and it's been flown a half dozen times...repaired maybe 4 of those times eek I am not a 3d flyer so I don't really know how one should fly!?!? I bought this to practice on so I didn’t destroy my Diablo. It seems to fly pretty well. Control is pretty twitchy (I’ll add some expo) but still predicable. Slow speed flight is a little erratic, could be me; I’m used to bigger more stable planes. I've been able to get it to harrier for a few soft landings. I've tried to hover, but because I have no idea what I'm doing I keep it pretty high up. It's hard to see what's going on, but a lot easier to recover from a mistake. The plane seems a bit fragile...I had it brake on a pretty soft landing. So I added landing gear this weekend witch seems to work really well. I usually fly in a parking lot so belly landings could be a little hard on it.

All in all I'm happy with the purchase. It's something I can beat up and not feel but so bad about. And even better, it's quick to build...I think it only took me an hour or two from start to finish. I just bought another one as a back up, I don't think this one is going to last very long laughing

Here are a couple pix, no flying pictures yet, I can't seem to keep it up long enough big grin



Img_0815.jpg
 Description:
Here's a group shot of a few of the toys
 Filesize:  76.74 KB
 Viewed:  577 Time(s)

Img_0815.jpg



Img_0842.jpg
 Description:
I added some color to the bottom of the wing
 Filesize:  60.64 KB
 Viewed:  577 Time(s)

Img_0842.jpg



Img_0813.jpg
 Description:
A little underside damage...damn sun!!
 Filesize:  52.08 KB
 Viewed:  577 Time(s)

Img_0813.jpg



_________________
www.sloweracing.com
www.octaneonline.com
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 325
Location: Kalamazoo, MI

PostPosted: Tue May 31, 2005 7:46 pm    Post subject:  

I've come close to smashing the Tensor a couple of times now but I manage to keep it going! My yak is just hanging there screaming" FLY ME !" I'm sure that with the way I've beeen flying my Tensor it will be soon. It's almost hard to smash a box kite though Shocked (Knock on Wood Embarassed )
_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
thefasttrack



Joined: 09 Apr 2005
Posts: 80
Location: miami

PostPosted: Sun Jun 05, 2005 7:47 am    Post subject:  

Radioflyer wrote:
It's almost hard to smash a box kite though Shocked (Knock on Wood Embarassed )


lol
Back to top  
slowracing



Joined: 18 Apr 2005
Posts: 26
Location: Williamsburg, VA

PostPosted: Sun Jun 19, 2005 6:48 am    Post subject: It's done for!!!  

Well my Yak has flown its last mission. While in an attempted hover about 5'-6' off the ground a huge gust of wind came up and caused a partial flip...well I did the rest of the flip and it took a straight nose dive into the payment. I have a spare and plan to assemble it later today. Maybe I can keep this one together a little longer laughing


Img_0864.jpg
 Description:
The aftermath
 Filesize:  68.14 KB
 Viewed:  452 Time(s)

Img_0864.jpg



Img_0866.jpg
 Description:
I'll re-use this
 Filesize:  92.63 KB
 Viewed:  452 Time(s)

Img_0866.jpg



Img_0865.jpg
 Description:
This goes to the dumpster
 Filesize:  68.4 KB
 Viewed:  452 Time(s)

Img_0865.jpg



_________________
www.sloweracing.com
www.octaneonline.com
Back to top  
thefasttrack



Joined: 09 Apr 2005
Posts: 80
Location: miami

PostPosted: Sun Jun 19, 2005 7:08 am    Post subject:  

lol holy sh*t
Back to top  
thefasttrack



Joined: 09 Apr 2005
Posts: 80
Location: miami

PostPosted: Sun Jun 19, 2005 3:23 pm    Post subject:  

can ihave your motor and controler big grin
Back to top  
slowracing



Joined: 18 Apr 2005
Posts: 26
Location: Williamsburg, VA

PostPosted: Sun Jun 19, 2005 4:18 pm    Post subject:  

thefasttrack wrote:
can ihave your motor and controler big grin


I still have plans for those smile

The motor has hit the pavement at least a half dozen times and survived all of them...its one tough cookie!! I am very impressed with how truly tough it is. I checked it today when I got home and the shaft is still straight as an arrow. I highly recommend this motor!!!

_________________
www.sloweracing.com
www.octaneonline.com
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 325
Location: Kalamazoo, MI

PostPosted: Thu Jun 30, 2005 5:42 pm    Post subject:  

I got a chance to get the Yak in the air, the Tensor had a mild mishap in a low rolling harrier. It's fixable but.....next My Yak is a blast to fly! I had an issue with a HS55 not centering properly so I'm going to see if Hitech will
fix it or replace it. It didn't stop me from wringing it out though. It harriers awesome, very predictable and stable. All I can say is, for $20, it's totally worth it Cool

_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
Rcflyer



Joined: 01 Jul 2004
Posts: 80

PostPosted: Tue Jul 05, 2005 11:25 am    Post subject:  

I was woundering are you guys (I mean anyone) using 5min epoxy to hold your firewall in the nose on outrunner motors? are you just using think foam safe ca to save weight?

and what cheap spray cans do you guys use to put custom paint schemes on your foamies?
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1124
Location: Sunnyvale, CA

PostPosted: Tue Jul 05, 2005 12:31 pm    Post subject:  

Rcflyer wrote:
I was woundering are you guys (I mean anyone) using 5min epoxy to hold your firewall in the nose on outrunner motors? are you just using think foam safe ca to save weight?


I just use the foam safe CA. I also add depron triangles to strengthen the firewall. Epoxy is too heavy for a foamy! laughing

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Tue Jul 05, 2005 2:27 pm    Post subject:  

3dbatixkid wrote:
I also add depron triangles to strengthen the firewall.


Aww i Sence the 3D Foamy in you 3DF invented the foam triangle strengthening idea Very Happy

_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Rcflyer



Joined: 01 Jul 2004
Posts: 80

PostPosted: Tue Jul 05, 2005 4:50 pm    Post subject:  

cool, I was hoping you would say that
thankyou for your response
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1099
Location: Sunnyvale, CA

PostPosted: Tue Jul 05, 2005 10:17 pm    Post subject:  

john wondra wrote:
3dbatixkid wrote:
I also add depron triangles to strengthen the firewall.


Aww i Sence the 3D Foamy in you 3DF invented the foam triangle strengthening idea Very Happy



Riiight... Rolling Eyes

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Wed Jul 06, 2005 7:44 am    Post subject:  

3dbatixkid wrote:
john wondra wrote:
3dbatixkid wrote:
I also add depron triangles to strengthen the firewall.


Aww i Sence the 3D Foamy in you 3DF invented the foam triangle strengthening idea Very Happy



Riiight... Rolling Eyes


we did, weve included them in our mini kits for the past year if not more.

_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive