| |
| Author |
Message |
skwarwheels
Joined: 23 Nov 2004 Posts: 45
|
Posted: Wed May 18, 2005 7:21 pm Post subject: Help with covering!!! |
|
|
Hi all,
I just got a new Accel Katana GS 40 to learn 3D with. This is also my first actual build of a kit. (Sorry about the Noob'ish question!!!!)
I started my project by opening up the box, only to find that the covering sorta resembles a raisin. Supposedly this is not a "china-coat", but a true covering material (I think it's ultracoat). Anyway, the wrinkles are only where there is sheeting, and when I hit it with an iron or a gun, the wrinkles just get bigger and/or multiply. I spent quit some time chasing these things around my plane, only to make the whole things look sorta...
WORSE!
I have read about putting a little pin hole to let the air escape. Is this my only option? The covering doesn't really seem to be shrinking, but I think it may be the trapped gasses stoping them. Please help.
Michael
PS...
I was wondering if Mike West would have some sparetime to help build my new airplane...now that he has completed his wing bolt experiment... |
|
| Back to top |
|
 |
Tom Uhlendorf

Joined: 18 Sep 2004 Posts: 563 Location: Morgan Hill, CA
|
Posted: Wed May 18, 2005 7:32 pm Post subject: |
|
|
| Yes the pin works great. I always use it WHEN needed. What is the temp, and how big are the rinkles after ironing them? |
|
| Back to top |
|
 |
Flatlandmike

Joined: 29 Oct 2004 Posts: 31
|
Posted: Wed May 18, 2005 7:38 pm Post subject: |
|
|
heat gun very sparingly hit the area with wrinkles then with opposite hand covered with a sock rub down
heat till any covering shrinks the slightest bit then remove heat and rub with the sock try not to shrink it much at all _________________ www.lmacky.org |
|
| Back to top |
|
 |
skwarwheels
Joined: 23 Nov 2004 Posts: 45
|
Posted: Wed May 18, 2005 7:43 pm Post subject: |
|
|
Thank's for the replies!
The wrinkles are all about 1/8 to 1/4 in wide and about 4 inches long. I have tried the heat and rub method, however the bubble doesn't really go away. I can sorta push it, but it just breaks into several smaller wrinkles. Then if I hit it again with the heat, it becomes one big wrinkle again.
I did get rid of one of the bubbles, but the amount of time that it took was disheartening! It would take me a month to remove them all at that rate!!! (hehe) |
|
| Back to top |
|
 |
Flatlandmike

Joined: 29 Oct 2004 Posts: 31
|
Posted: Wed May 18, 2005 7:47 pm Post subject: |
|
|
sorry man looks like a recover but that ould take a while too _________________ www.lmacky.org |
|
| Back to top |
|
 |
skwarwheels
Joined: 23 Nov 2004 Posts: 45
|
Posted: Wed May 18, 2005 7:51 pm Post subject: |
|
|
no...
It's not that bad. It just looks sloppy. I can try some more with the heat gun, and I will try the pin hole on a few hidden spots.
would taking the sock off the iron help or would I just be risking the covering. I keep wondering if more heat would help. Probably right up to the point when I burn through! (hehe)
Michael |
|
| Back to top |
|
 |
Tom Uhlendorf

Joined: 18 Sep 2004 Posts: 563 Location: Morgan Hill, CA
|
Posted: Wed May 18, 2005 8:31 pm Post subject: |
|
|
Ok, well IF it is Ultracote. Go to about 300 and just rest the iron on the rinkle and move it in small circles on the rinkle. And if the color gets to dark, take the iron off because it is too hot. Just stay away from seems as it will make them crepe and make a crooked line or show wood!. They WILL come out. You just have to keep the iron on it. Those wrinkle are very small actually. Just be patient. And I would take the sock off too.
Also, once the wrinke has shrunken, if it still is not applying to the wood, get it hot and rub it down with your finger while it is still hot. Or quicky cool it with a wet cloth to shrink it. I don't know why, but the faster you cool it, the more it shrinks. |
|
| Back to top |
|
 |
skwarwheels
Joined: 23 Nov 2004 Posts: 45
|
Posted: Wed May 18, 2005 8:42 pm Post subject: |
|
|
Thanks Tom,
I checked and it is ultracote. I will try your technique and see what happens.
Are you suggesting to prick the bubble with a pin, or not to? |
|
| Back to top |
|
 |
Tom Uhlendorf

Joined: 18 Sep 2004 Posts: 563 Location: Morgan Hill, CA
|
Posted: Wed May 18, 2005 9:11 pm Post subject: |
|
|
No problem. Glad to help.
Only if absolutally won't shrink. But with the size bubbles your talking about, I don't think you will need to prick them.
And I was thinking, I would start at 250, and work you way up. I think the melting temp for Ultracote is around 350, so stay away from that unless your using a sock. |
|
| Back to top |
|
 |
skwarwheels
Joined: 23 Nov 2004 Posts: 45
|
Posted: Wed May 18, 2005 9:40 pm Post subject: |
|
|
TOOOOMMMMM!
You are the man. The poor iron won't throw out enough heat with the sock, but I pulled the sock, cranked the iron up to "3" and it worked!
Not all that keen about the little scratches that the iron leaves without the sock, but with a gentle touch...
Yeaaaa! Now I'll be able to sleep tonight. Thanks again! You were much help!!!
Michael |
|
| Back to top |
|
 |
JR.Master

Joined: 07 Nov 2004 Posts: 462 Location: San Angelo
|
Posted: Thu May 19, 2005 4:54 am Post subject: |
|
|
Order you a woodpecker from tower it will take the airbubbles out. When you add heat the air goes out of the tiny holes that can only be seen from like 1ft away.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHZ26&P=7 _________________ Did I do that? Hummmmmm!Yep, sure did! |
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Thu May 19, 2005 12:00 pm Post subject: |
|
|
$13.99, what a loud of garbage. just use a friggin pin, lol. also, with ultracote, a lot of heat isnt good. it makes wrinkles bigger. use very little heat. _________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
JR.Master

Joined: 07 Nov 2004 Posts: 462 Location: San Angelo
|
Posted: Thu May 19, 2005 1:35 pm Post subject: |
|
|
That takes forever using a damb pen with this it takes like a seconed with this thing compared to like 40 seconds. I've got one and they're awesome man the got little pin type needle things that are friggin sharp. _________________ Did I do that? Hummmmmm!Yep, sure did! |
|
| Back to top |
|
 |
| |