ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Razor 350, which prop?
3 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
Balsa+Nitro



Joined: 21 Jul 2004
Posts: 22

PostPosted: Fri May 20, 2005 9:37 pm    Post subject: Razor 350, which prop?  

Anybody know the sweet spot for razor 350 grear ratio and prop combinations? I ran my new Razor 350 today with a Watt meter, and on a friend's thrust stand, and I couldn't find a combination to beat an old Himaxx 2015-4100. It was disappointing. I know the Razor 350 has to be better than that. I'll be using 3 cell 1,200 mAh batteries and running it on 400 sq/in wing foamies in about the 13 oz range. I'll also be using a Phoenix SC.
_________________
"...The only thing that counts is faith expressing itself through love." Galatians 5:6
Back to top  
Balsa+Nitro



Joined: 21 Jul 2004
Posts: 22

PostPosted: Mon May 23, 2005 6:54 pm    Post subject:  

My new foamy with 400 sq/in of wing area came in at only 12.5oz ready to fly with my Razor 350 and 1,200 mAh 3 cell. I started out with a D ratio and 12x3.8 APC. It hovers at only 3.3 Amps, and wide open throttle (can you use that term with electrics?) it pulls 11 amps. I got well over 20 minutes of 3D flight. I'm new to electrics, where do I go from here?
_________________
"...The only thing that counts is faith expressing itself through love." Galatians 5:6
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Mon May 23, 2005 7:36 pm    Post subject:  

I know a lot of people use a GWS 12x6 with that D gear ratio with that motor.
_________________
--Meyrick--
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive