ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

How to cut out Zagi tape grapthics???
8 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
ChrisAttebery



Joined: 29 May 2005
Posts: 13

PostPosted: Sun May 29, 2005 12:25 pm    Post subject: How to cut out Zagi tape grapthics???  

For you guys that do the nice Zagi tape graphics...

Do you pre cut the graphics out or do you do it right on the foam? If you precut, what do you stick the tape to while you're cutting it?

TIA,


Chris
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Sun May 29, 2005 10:14 pm    Post subject:  

some precut it on a glass table but most people cut right on the foam. Just have enough friction when cutting on the foame so you don't cut thru the foam.
_________________
--Meyrick--
Back to top  
ChrisAttebery



Joined: 29 May 2005
Posts: 13

PostPosted: Mon May 30, 2005 6:57 am    Post subject:  

I guess the tape doesn't pull up the foam when you remove it?

Thanks Meyrick, I'll give it a shot.



Chris
Back to top  
slowracing



Joined: 18 Apr 2005
Posts: 26
Location: Williamsburg, VA

PostPosted: Mon May 30, 2005 3:24 pm    Post subject: Re: How to cut out Zagi tape grapthics???  

ChrisAttebery wrote:
For you guys that do the nice Zagi tape graphics...

Do you pre cut the graphics out or do you do it right on the foam? If you precut, what do you stick the tape to while you're cutting it?

TIA,


Chris


I use the backing from vinyl decals. I can cut right on it and the tape pulls off with no resistance. If there is a vinyl cutting place near you, you maybe pick up some scrap backing!?!? It works great!!!

Sonny

_________________
www.sloweracing.com
www.octaneonline.com
Back to top  
ChrisAttebery



Joined: 29 May 2005
Posts: 13

PostPosted: Mon May 30, 2005 8:48 pm    Post subject:  

Ah Ha!!!

I just happen to know someone that owns a sign shop...

Thanks Slow!


Chris
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Mon May 30, 2005 9:57 pm    Post subject:  

ChrisAttebery wrote:
I guess the tape doesn't pull up the foam when you remove it?
Chris


No, well at least Depron does not. I don't know about other types of foam though.

_________________
--Meyrick--
Back to top  
slowracing



Joined: 18 Apr 2005
Posts: 26
Location: Williamsburg, VA

PostPosted: Tue May 31, 2005 12:00 pm    Post subject:  

ChrisAttebery wrote:
Ah Ha!!!

I just happen to know someone that owns a sign shop...

Thanks Slow!


Chris


Glad I could help Very Happy

_________________
www.sloweracing.com
www.octaneonline.com
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 454
Location: Jackson, MS

PostPosted: Sat Jul 16, 2005 10:44 am    Post subject: Re: How to cut out Zagi tape grapthics???  

ChrisAttebery wrote:
For you guys that do the nice Zagi tape graphics...

Do you pre cut the graphics out or do you do it right on the foam? If you precut, what do you stick the tape to while you're cutting it?

TIA,


Chris


I use wax paper also. I stick the tape onto wax paper, then use a 12'x24" piece of smooth edge glass I have and cut out a design then. The tape pulls from the wax paper with no problem, but then sticks onto the plane perfectly and doesn't move. I cut out all my decals myself by hand for my Diablo 3D. I've added a few more, but nothing major.


_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive