ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

''CAN ANYBODY TELL ME ABOUT THE E-FLGHT BLADE?''
19 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
3dfool



Joined: 03 Jul 2005
Posts: 9

PostPosted: Tue Jul 12, 2005 6:16 pm    Post subject: ''CAN ANYBODY TELL ME ABOUT THE E-FLGHT BLADE?''  

Hi guys i just join this forum not to long ago this 3dbatix is so cool
the vids are also cool too cool so anyway on to the question i am thinking about getting the e-flight blade heli
http://www.horizonhobby.com/Shop/ByCategory/Product/Default.aspx?ProdID=EFLH1100
can any of you guys tell me any useful information about this heli like
for example how long is the flight time is with the batt that come with kit ?and how long is the flight time with the 900 li-po batt? also would i have
to change the speedcontroller when i swich to li-pos? and one more thing
what size or type of brushless will i need for this little heli to do 3d?
please any info about this heli would be cool. cool

E
Back to top  
JR.Master



Joined: 07 Nov 2004
Posts: 462
Location: San Angelo

PostPosted: Tue Jul 12, 2005 7:22 pm    Post subject:  

I've heard they are awesome flyers for their price. Just make sure you buy the 3d kit for it it's like $29 something like that. Good luck Very Happy
_________________
Did I do that? Hummmmmm!Yep, sure did!
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Tue Jul 12, 2005 10:58 pm    Post subject:  

They are nice flying helis out of the box for what they are. If you want something for 3D, you might want to go with the TREX. They are great flying helis. The advantage of the TREX is that it has a belt driven tail, and is set up just like a larger heli. The blade has a tail motor, which is suseptable to burning out and having to be replaced. The TREX is also much more maneuverable, and parts are readily availiable.

www.aeromicro.com has the helis, though you may have to call in to order one.

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
pitsbros



Joined: 13 Jul 2005
Posts: 2
Location: Geneva, IL

PostPosted: Wed Jul 13, 2005 7:12 am    Post subject:  

I flew one a couple of weeks ago at a friend's house. It had the 3D setup and it flew really well. I was surprised. It has a great tolerance for wind and is very stable. This coming from a guy who has flown a heli once before. I was able to hover it for 10 minutes straight without dorking it, so it's a good heli!!
Back to top  
Colin



Joined: 08 Jun 2004
Posts: 25
Location: Canada

PostPosted: Wed Jul 13, 2005 8:50 am    Post subject:  

Out of the box they fly "well". But like Zak said they have a seprate motor for the tail rotor which speeds up and slows down for control.

I've flown too many different micro helis to count and one has yet to impress me. I personally wouldn't dump any money into them wink

Colin

_________________
Great Hobbies
Thunder Tiger
Morgan Fuels
HobbyCraft Canada
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Wed Jul 13, 2005 10:32 am    Post subject:  

Colin wrote:
Out of the box they fly "well". But like Zak said they have a seprate motor for the tail rotor which speeds up and slows down for control.

I've flown too many different micro helis to count and one has yet to impress me. I personally wouldn't dump any money into them wink

Colin


Have you flown the CCPM TREX? Cool

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Wed Jul 13, 2005 11:50 am    Post subject:  

Make sure you get the real T-Rex, because all the clones of it just don't fly as good as the one from Align. (I think thats the company, probably didn't spell it right lol)

The only thing is, the driven tail causes a lot of drag and friction in the system, so it is almost pointless to have it due to all the friction which makes it almost impossible to auto without loosing all of your blade speed.

(just an observation of a freind's heli at Bayside)

But, I probably would have one if my money wasn't going to a Carden and all the glow choppers. Razz

Brandon

_________________
Lower??!!
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Wed Jul 13, 2005 1:09 pm    Post subject:  

3D-kid330 wrote:
)

But, I probably would have one if my money wasn't going to a Carden and all the glow choppers. Razz


Cool, so your finally building a 40% edge? Good for you. Anyway, your going to want to take the washers on the spindle, right in the blade grips, and flip them so that the smaller side is on the inside, otherwise the heli will have a "sticky" feel in collective that a lot of people hav been complaining about. Also, if you are going to use the motor from the aerobatic enhancement kit, you need to use a li-pio battery right away, the one that gives the best performance in aerobatics is something 3S, 830-900mah the 1320, is WAY to heavy for aerobatics. If you experience radio glitching problems, you should check the crystal, to see if it is a bit loose, and if it is, bend the plugs out a little, so that it is very snug, I know lots of people have had those problems with the heli. If that doesn't work, you can use a Futaba single conversion crystal, with a futaba heli capable transmitter, such as the 9c, if you do this, I can give you a link to the setup for the blade on a 9C, as horizon has given some one. These are all of the mod/ tricks that I know of with this heli, I'd say go get one, and fly it, they're geat!
Back to top  
3dfool



Joined: 03 Jul 2005
Posts: 9

PostPosted: Wed Jul 13, 2005 3:48 pm    Post subject:  

Thanks for the info about this heli guys but i still need to know two
more thing how long is the flight time with stock batt that comes
with the kit? and how long is the flght time with the 3 cell 900mahp li-po?
by the way fly boy can you send me that link you got about the blade?
EFRAM
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Wed Jul 13, 2005 4:18 pm    Post subject:  

3dfool wrote:
Thanks for the info about this heli guys but i still need to know two
more thing how long is the flight time with stock batt that comes
with the kit? and how long is the flght time with the 3 cell 900mahp li-po?
by the way fly boy can you send me that link you got about the blade?
EFRAM

Here are the settings
Here they are as they were sent to me...since I still have crystal problems I have not been able to verify how well they work.
------------------------------------------
I am using the aerobatic enhancement kit and 11.1v Li-po.
Here they are:
Futaba 9C** Setup for Blade CP Helicopter

*Note: [ ] Denotes Menu Screens to Select.

*Please note: these settings are for the heli’s with the aerobatic enhancement kit already installed and operating with an 11.1v Li-Po Battery Pack. These setting may not provide adequate movement for the stock heli package.

Swash plate Selection: [Parameter] Type: HELI (SR-3)

Servo Movement; Normal/Reversed: [Reverse]
1. Ail: Normal
2. Ele: Reversed
3. Thr: Reversed
4. Rud: Normal
5. Gyr: Normal
6. Pit: Reversed
7. Aux: Normal
8. Aux: Normal

Sub-trim Positions: [Sub-Trim]
1. Ail: +26
2. Ele: +38
3. Thr: 0
4. Rud: -58
5. Gyr: 0
6. Pit: -27
7. Aux: 0
8. Aux: 0

End Points (ATV): [End Point] All End Points are set to Stock 100% for all
channels because you are in CCPM mode and this will not effect a anything on this heli.

Adjusting correct movement and Orientation of servos for 120* swash plate: [Swash AFR]

Ail: +70%
Ele: -70%
Pit: -44%



Revo Mixing: [REVO. /NOR]
Mix: INH

Throttle Curve (Normal): [TH-CV /NOR]
1. 0.0%
2. 32.5%
3. 63.0%
4. 86.5%
5. 100.0%
*Please note: these settings are for the heli’s with the aerobatic enhancement kit already installed and operating with an 11.1v Li-Po Battery Pack. These setting may not provide adequate movement for the stock heli package.

Pitch Curve (Normal): [PI-CV /NOR]
1. 20.0%
2. 39.5%
3. 50.0%
4. 65.5%
5. 74.5%
*Please note: these settings are for the heli’s with the aerobatic enhancement kit already installed and operating with an 11.1v Li-Po Battery Pack. These setting may not provide adequate movement for the stock heli package.

Trim Settings: [TRIM] Adjusted by the stick trim tabs, not in the menu.
Aile: 4 (< 20)
Elev: 4 (V 52)
Thro: 4 ( 0)
Rudd: 4 (> 24)

Advanced Heli Adjustments

Throttle Curve: [THR-CURVE]
Normal: See Above Settings for Normal Throttle Curve.
IDL1:
1. 100.0%
2. 71.5%
3. 58.5%
4. 71.5%
5. 100.0%
IDL2:
1. 100.0%
2. 77.0%
3. 64.5%
4. 77.0%
5. 100.0%
IDL3: Inhibit

Pitch Curves: [PIT-CURVE]
Normal:
1. 20.0%
2. 39.5%
3. 50.0%
4. 65.5%
5. 74.5%
IDL1:
1. 9.0%
2. 21.0%
3. 38.5%
4. 51.0%
5. 72.5%
IDL2: Copy of IDL1.
IDL3: Copy of IDL1.

Gyro Sensitivity: Kept at stock settings of 50.0% up and down.
I adjusted the gyro on the heli down to about 50% of full motion on the pod. This worked for me, but they are all factory tested and may be set up in a different position.

I also adjusted my pitch control rods for each blade OUT one full turn. I found this to really help with the jumpy pitch movement throughout the pitch curve.

For the stock battery you can get about a 13 minute flight, so shoot for about 10 minutes of flying time, because the tail rotor starts to go out as the battery loses voltage. With the 900mah li-po, on the aerobatic enhancement motr, about the same flight time, because the current draw is higher than the stock set up.
This is about all that I know about this heli, now I gotta go buy one. Razz
Back to top  
Colin



Joined: 08 Jun 2004
Posts: 25
Location: Canada

PostPosted: Thu Jul 14, 2005 8:27 am    Post subject:  

Quote:
Have you flown the CCPM TREX?


No...Karuse crashed it before Danny and I got to it wink He did describe how it flew to us, and he said like all other micros it feels heavy…but his had wicked power..I couldn’t believe it!

Quote:
The only thing is, the driven tail causes a lot of drag and friction in the system, so it is almost pointless to have it due to all the friction which makes it almost impossible to auto without loosing all of your blade speed.


The reason they don't auto well is because they're heavy for their disk size and the rotor is very light...inertia is just not there. Driven tails can be extremely efficient if done right, and the align one is pretty darn good.


On another note the blade did fly inverted right out of the box (not a single up-grade)....but the tail was all over the place....it did it nonetheless.

Colin

_________________
Great Hobbies
Thunder Tiger
Morgan Fuels
HobbyCraft Canada
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Thu Jul 14, 2005 10:35 am    Post subject:  

3D-kid330 wrote:
The only thing is, the driven tail causes a lot of drag and friction in the system, so it is almost pointless to have it due to all the friction which makes it almost impossible to auto without loosing all of your blade speed.

Brandon


Rolling Eyes The belt driven tail is the best way to go. It is really not a lot of drag. It is much better than a shaft driven tail, MUCH better. The belt drive is stronger, and more powerful.

The reason they dont auto well, is the blades are not heavy enough. If your blades were 3 times as heavy, it would auto, but not be as responsive.

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Colin



Joined: 08 Jun 2004
Posts: 25
Location: Canada

PostPosted: Thu Jul 14, 2005 10:56 am    Post subject:  

I actually have some heavy FG blades (totaled the foamies when I flew it into a tree) for the shogun. I'm just waiting on tail gears..if it had of had a belt driven tail I would have been flying 5 mins later.

Even with the heavy blades...the machine is extremely heavy for it's disk size. It might do better "autos" from a hover, but I still don't think it will do a full auto lol.

Colin

_________________
Great Hobbies
Thunder Tiger
Morgan Fuels
HobbyCraft Canada
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Thu Jul 14, 2005 8:55 pm    Post subject:  

Zak,
I agree that it is a good way to go, but the whole system was draggy enough that you would need VERY heavy blades to auto. On the plus side, there are no tiny motors to wear out, and there is better tail authority.

flyboy1,

The money is being saved to get the Carden; I have enough money right now to get it, but I always like to have at least 1/2 more than the cost so that I have something left to work with after instead of being left with nothing.

Brandon

_________________
Lower??!!
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Thu Jul 14, 2005 10:06 pm    Post subject:  

And how much do you have saved? Just buying the kit isnt gonna get you too far...
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Colin



Joined: 08 Jun 2004
Posts: 25
Location: Canada

PostPosted: Fri Jul 15, 2005 8:29 am    Post subject:  

Quote:
I agree that it is a good way to go, but the whole system was draggy enough that you would need VERY heavy blades to auto. On the plus side, there are no tiny motors to wear out, and there is better tail authority.


You need VERY heavy blades to auto a micro heli with a tail motor on the back too...and then they still auto like a brick. BTW, the tail is not driven in an auto on the T-Rex or Shogun. They use a one way bearing on the mast without a split gear to drive the tail rotor. When the power is off and the main blades are still turning the belt is not. The belt doesen't effect the auto performance since it's not moving anyway.

Colin

_________________
Great Hobbies
Thunder Tiger
Morgan Fuels
HobbyCraft Canada
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Fri Jul 15, 2005 10:24 am    Post subject:  

Colin, Thanks for the clarification. smile

And for Zak, I have a lot saved. I've been saving my whole life basically, and I'm not like some people who buy airplane after airplane and have nothing left after Rolling Eyes



Brandon

_________________
Lower??!!
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Fri Jul 15, 2005 6:49 pm    Post subject:  

Well, guys, after flying my blade for the first few times today, I have a few things to comment on. The most important thing in this heli is the main blades, get them BALANCED, the vibration really f**ks the gyro, and that is why some people have reported the tail going out. On my buddies his is rock solid, like on my raptor 50. I also noticed that it performs WAY better in idle up, then in normal mode, it is a LOT more stable, and it is also better when you get out of ground effect. I also noticed this bird is tuff as nails laughing , i had kinda tipped it of, and just scraped the blades a bit, it has also suffered from some radio hits, and felll out of the air, and literally bounced back up. Today I ordered a futaba single conversion crystal, so I can try to use my 9C in the blade, to eliminate the glitching. On a side note, when I was in the lhs to get the crystal, I was asking about using carbon t0rex blades on it, then I saw some carbons for it, made by E-Flite, so I just had to get them, I'll reprot back later on the performance with the carbons once I get to try them, nothing like bling on a heli Razz This is a great heli, and anyone considering getting into heli's, without the risk of losing a 1.5K bird get this, it is simply... AWESOME. It is like a heli version of a foamy, u can try new stuff with it, and not worry about dorking it cuz it does not break. I really like this heli, but I would like horizon to try and do a bit better on the 4 in 1 system, so u can go brushless later, and I have read that this may be coming ass another add on. Well, this thing would be really cool, with glow wire, and night blades. Well off to go fly, later.

Eric
Back to top  
3dfool



Joined: 03 Jul 2005
Posts: 9

PostPosted: Sat Sep 24, 2005 2:24 pm    Post subject:  

Hi fly boy i fianlly got my blade in after almost 3 tree mouths waiting for
my local hobby shop to get some in stock due to back order
problems from horizon but anyway i'm trying to set it up with my futaba
9zap wc2 radio so i need your help you sent me the set up for the 9c
i tryed to do it from there but no luck so do you know any link that you could send me to that shows somebody setting it up with a futaba 9zap
wc2? oh by the way how did those carbon blades work on your e-flight
blade?

EFRAM
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive