ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Which servo
25 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Sat Aug 13, 2005 7:30 pm    Post subject: Which servo  

Hey guys, I have a 30% toc1 yak 54 thats gonna be here monday or tuesday. I was wondering what servo I should use for the rudder, I was looking at the 8611A, or a futaba 9152. I canget either, so what is best for the application
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Sat Aug 13, 2005 8:35 pm    Post subject: Re: Which servo  

fly boy 1 wrote:
Hey guys, I have a 30% toc1 yak 54 thats gonna be here monday or tuesday. I was wondering what servo I should use for the rudder, I was looking at the 8611A, or a futaba 9152. I canget either, so what is best for the application


Fly boy 1, if you don't have anything against Hitec, you can use their HS-5745MG or HS-5998T instead of the JR 8611A or Futaba 9152. I personally only use Hitec as they have served me well for many years so far.

On a 6V system

JR 8611A
282oz (6v)
.18 sec/60° @ 4.8v (6.0V not given)
4.8V or 6.0V
Alloy w/ metal/nylon B1 gear
2.24 oz
$114.99

Futaba 9152:
278 oz/in. (20kg.cm)
0.19sec/60 degrees
6 Volts Only
Coreless Motor
Dual Ball Bearing
All Metal Gears
3.0oz. (85g)
$109.99

Hitec 5745MG
250 oz/in. (18kg.cm)
0.15sec/60 degrees
4.8V or 6.0V
Cored Carbon Brush
Dual Ball Bearing
1 Resin, 3 Metal Gears
5.68oz (161g)
$69.99

HS-5998T
249.96oz/in. (18kg.cm)
0.19sec/60 degrees
4.8V or 6.0V
Coreless Carbon Brush
Dual Ball Bearing MR106
4 Titanium Gears
2.18oz (62g)
$114.95

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Aug 14, 2005 5:43 am    Post subject:  

i say go with the hitec 5745.. it seems to be the fastest of the bunch(.15) and it is larger than standard size servos. a second choice for me would be to use a hitec 5955TG. lotsa tork (333oz at 6v) and a standard size case. also pretty fast.(.18 i do beleive.)
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Sun Aug 14, 2005 6:33 am    Post subject:  

Butthead wrote:
a second choice for me would be to use a hitec 5955TG. lotsa tork (333oz at 6v) and a standard size case. also pretty fast.(.18 i do beleive.)


Good choice Butthead, I did think about that servo also.

I just posted servos around the same torque as he had described with the 8611 and 9152, but I think any of those Hitec servos mentioned would be up to the job for that plane with no problem.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Sun Aug 14, 2005 6:59 am    Post subject:  

Thanks guys, the only problem with the 5745, is that it is a 1/4 scale servo. This will probably give me a very aft cg, as the rudder servo is a bit far back from the cg. On the plus side, it has lots of tork, but it has bigger gears, so it will have no trouble holding. The only problem is that I want to use a swb servo arm for the rudder, and I don't know very much about pull pull setups, and especially on this plane, because they don't specify a particular way to do it. This planes manual seems to suck to, it's only 9 pages laughing . Thanks for the help.
Eric
Back to top  
thefasttrack



Joined: 09 Apr 2005
Posts: 80
Location: miami

PostPosted: Sun Aug 14, 2005 3:54 pm    Post subject:  

the 5995tg is a robitic servo wich means it goes 180 deegress with that amount of radius youll rip out your rudder
Back to top  
thefasttrack



Joined: 09 Apr 2005
Posts: 80
Location: miami

PostPosted: Sun Aug 14, 2005 3:56 pm    Post subject:  

i say go airtronics 94358 it does 200 ounces at .10 its 94 dollars its the best choice
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Aug 14, 2005 4:24 pm    Post subject:  

thefasttrack wrote:
the 5995tg is a robitic servo wich means it goes 180 deegress with that amount of radius youll rip out your rudder

you are right, except i didnt say anythign about the 5995TG, im talking about the 5955TG. theyre different. trust me, i have a 5955TG in my 35% extra.

http://hitecrcd.com/servos/hs5955tg.htm

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Montgomery



Joined: 07 Dec 2004
Posts: 58
Location: Tampa, Florida

PostPosted: Mon Aug 15, 2005 3:34 am    Post subject:  

Good question fly boy & good reply form everyone else. I receieved my TOC friday and was wondering about the same. My set up so far....
1) DA50cc with canister system
2) Li Ion battery packs
3) Mejslik 22/10
4) Ordering carbon fiber wing tube, stab tube, main gear, & spinner.
5) MPI heavy duty switches.
Need suggestions on Ale / Elv servos, & power panel.
Fly boy is right about the manual, its pritty much worthless except for locating the CG.
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Mon Aug 15, 2005 7:16 am    Post subject:  

Cool, I was wondering if I should get cans or standard muffs for the engine? I know cans are quieter, than standards, but do i need them that quiet for IMAC. Oh, Monty, are you sure you want to add all that carbon, especially the spinner? I heard that some guys did that, and they got very aft cg's, from less weight up front. But I was also considering doing that too, so tell us the all up weight when your done.
Back to top  
JR.Master



Joined: 07 Nov 2004
Posts: 462
Location: San Angelo

PostPosted: Mon Aug 15, 2005 8:53 am    Post subject:  

I'd strongly suggest hitec 5945's all around.

1 per aelerion
1per throttle a
2 for elevator
and 2 for rudder
Cool

_________________
Did I do that? Hummmmmm!Yep, sure did!
Back to top  
JR.Master



Joined: 07 Nov 2004
Posts: 462
Location: San Angelo

PostPosted: Mon Aug 15, 2005 8:54 am    Post subject:  

Or hitec new 6300 series Cool
_________________
Did I do that? Hummmmmm!Yep, sure did!
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Mon Aug 15, 2005 9:14 am    Post subject:  

JR.Master wrote:
I'd strongly suggest hitec 5945's all around.

1 per aelerion
1per throttle a
2 for elevator
and 2 for rudder
Cool

a $90 servo for throttle? and $180 for rudder? i'd go with say $30 for throttle(S3004) and $114 for rudder(single 5955).

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Montgomery



Joined: 07 Dec 2004
Posts: 58
Location: Tampa, Florida

PostPosted: Mon Aug 15, 2005 9:32 am    Post subject:  

Here is a pic of my friends new plane. 1st. flight was this morning.
With a 3W50, slim line Pitts muff, & Carbon spinner it ballanced perfectly.
Ive decided to send Canister back & will be mounting tank in Canister hole directly under power panel & on CG. I like the way he set up electronics, but as you can see...No where for tank.[/img]



Bob YAK 001.jpg
 Description:
Inside
 Filesize:  15.89 KB
 Viewed:  412 Time(s)

Bob YAK 001.jpg


Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Mon Aug 15, 2005 5:17 pm    Post subject:  

I personally will never touch a hi-tec servo again in my life, i had 3 go bad in my big yak over the coarse of 2 weeks! one locking my rudder on full on 3d deflection, plane barely made it down, when was the last time you heard of an 8611 doing that? do things right get JR or Futaba. Just my 2 cents.

John

JR.Master wrote:
I'd strongly suggest hitec 5945's all around.

1 per aelerion
1per throttle a
2 for elevator
and 2 for rudder
Cool

_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Mon Aug 15, 2005 5:24 pm    Post subject:  

john wondra wrote:
when was the last time you heard of an 8611 doing that? do things right get JR or Futaba.
JR.Master wrote:
I'd strongly suggest hitec 5945's all around.

1 per aelerion
1per throttle a
2 for elevator
and 2 for rudder
Cool


I have a brand new 8611a that has about 25 flights on it and its part way locked up.

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Mon Aug 15, 2005 6:06 pm    Post subject:  

I agree with John, those things need some quality control or something. I have had so many lock up or fail it's not funny. (almost lost a few planes because of that)

I would go JR. The 8611 is smaller and lighter than the monster 9152, plus it's faster and has more torque to boot than the others. Just from personal experience, I will not put any other servo in something that you don't want ending up in splinters.

_________________
Lower??!!
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Mon Aug 15, 2005 7:59 pm    Post subject:  

I think it depends on what part of the world you live in. Here in the southeast (Mississippi), I have seen JR and Futaba fail on more than one occassion. I think they all can and will fail, but I advise you to go with what you are comfortable using. So far Hitec has been good to me, but that doesn't mean that nothing can go wrong. A lot of decisions here are based on personal preference. I like and use all 3 brands of servos mentioned here believe it or not and they all work great with very little problems if any.

The choice is all yours based on personal experience and overall beliefs. I don't think you can go wrong with any of these brands.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Tue Aug 16, 2005 8:12 am    Post subject:  

Well guys, I'm going to go with a 9152 on the rudder for sure. I am considering changing out the hitec for so 9351's as well. I was wondering what servo would be good for throttle? Just a standard, or high speed?
Oh, I was also wondering I I should use canns on this plane for flying in IMAC? Otherwise I want to use standards. Are the standard mufflers that loud that I need cans? Thanks
Eric
Back to top  
Montgomery



Joined: 07 Dec 2004
Posts: 58
Location: Tampa, Florida

PostPosted: Tue Aug 16, 2005 8:23 am    Post subject:  

I'm going with Slimline pitts on mine. Heard a 3W50 run with this yesterday and was not too loud at all. If you use canns the tank will need to go tight to front of the Wing tube making it a pain in the butt to install the front wing bolts. Ditch the canns & install tank in canister housing.
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Tue Aug 16, 2005 9:23 am    Post subject:  

fly boy 1 wrote:
I was wondering what servo would be good for throttle? Just a standard, or high speed? Eric


Eric, I only fly glow powered models and for throttle, I usually use a HS-85BB. It has about 50 oz of torque and is half the weight of a standard servo. It wouldn't have any problems operating a gas motor carb. If you are trying to save weight, that is a very good option to consider.

HS-85BB
Operating Voltage: 4.8-6.0 Volts
Speed: 0.14sec/60 degrees
Weight: 0.77oz (21.9g)

You could use the MG also for stronger gears.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
JR.Master



Joined: 07 Nov 2004
Posts: 462
Location: San Angelo

PostPosted: Tue Aug 16, 2005 11:40 am    Post subject:  

Yeah to me servo's work differently in different regions of the world like up notrh they always goin threw servo's because of the humidty and the cool temp. down here in texas we don't have problems with servo's freezing up. I guess since it's kinda humid and dry down here.
_________________
Did I do that? Hummmmmm!Yep, sure did!
Back to top  
thefasttrack



Joined: 09 Apr 2005
Posts: 80
Location: miami

PostPosted: Tue Aug 16, 2005 1:15 pm    Post subject:  

Butthead wrote:
thefasttrack wrote:
the 5995tg is a robitic servo wich means it goes 180 deegress with that amount of radius youll rip out your rudder

you are right, except i didnt say anythign about the 5995TG, im talking about the 5955TG. theyre different. trust me, i have a 5955TG in my 35% extra.

http://hitecrcd.com/servos/hs5955tg.htm
lol sry i thought it was a typo i never ever saw that servo thanx
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Tue Aug 16, 2005 5:24 pm    Post subject:  

JR.Master wrote:
Yeah to me servo's work differently in different regions of the world like up notrh they always goin threw servo's because of the humidty and the cool temp. down here in texas we don't have problems with servo's freezing up. I guess since it's kinda humid and dry down here.

uuuhhhhhhh, what? if its dry outside then it cant also be humid, and if its humid outside it cant also be dry. Confused

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Wed Aug 17, 2005 3:22 am    Post subject:  

Butthead wrote:
uuuhhhhhhh, what? if its dry outside then it cant also be humid, and if its humid outside it cant also be dry. Confused


Haha, you are right. Here in Mississippi, It's so humid even when it isn't raining your cloths will stick to you as if you got stuck in the rain. I visited Dallas, Texas all the time for to visit family and it is a different heat there. It is hot and dry, like it will crack your skin, but in Mississippi it is still hot, but you can't breath and your cloths will stick to you more on their own and you feel sticky all the time when outside. That is what humity feel like, not what's in Dallas. I think of Dry roasted peanuts when I'm in Texas unless you are along the gulf coast region, then I would imagine it is more humid.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive