ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Balancing APC props??
13 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Slheinz



Joined: 10 May 2005
Posts: 10
Location: Medicine Hat, Alberta, Canada

PostPosted: Sun Aug 28, 2005 2:52 pm    Post subject: Balancing APC props??  

How do you balance your APC props..........or do you??
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Sun Aug 28, 2005 6:16 pm    Post subject: Re: Balancing APC props??  

Slheinz wrote:
How do you balance your APC props..........or do you??


Most APC props don't need to be balanced, but you would balance these the same way as any other prop if it is needed. I lightly sand the heavy tip to achieve balance if it is needed. I find APC props are generally balanced to an acceptable level when purchased, but don't always count on that.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Mon Aug 29, 2005 4:31 am    Post subject:  

I balance all my props. I start by lightly sanding all the sharp edges down. Then sand on the back side of which blade is the heaver until they are both even.
_________________
http://www.texomarc.org/
Back to top  
Montgomery



Joined: 07 Dec 2004
Posts: 58
Location: Tampa, Florida

PostPosted: Mon Aug 29, 2005 10:50 am    Post subject:  

I agree most APC are fairly close to ballance.
I also sand down all edges and then sand FRONT of propellar. Doesnt sanding the back of the prop change the pitch?
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Mon Aug 29, 2005 12:28 pm    Post subject:  

Quote:
Doesnt sanding the back of the prop change the pitch?


HHMMMmmm. I haven't ever heard that? I have always have been told to lightly sand the back of the prop? I would like to hear from others?I can always learn something new!

_________________
http://www.texomarc.org/
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Mon Aug 29, 2005 1:28 pm    Post subject:  

ive been told the same thing; sand the front of the prop. sanding the back changes the airfoil.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Mon Aug 29, 2005 2:56 pm    Post subject:  

Is the front of the prop not part of the airfoil and the pitch?
_________________
http://www.texomarc.org/
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Mon Aug 29, 2005 3:12 pm    Post subject:  

The back of the prop is flat. The front is the airfoil that makes all the thrust. When balancing, you want to sand the back of the prop.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Mon Aug 29, 2005 3:47 pm    Post subject:  

oops
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Mon Aug 29, 2005 4:23 pm    Post subject:  

I learn stuff every day on this site, Thanx ya'll big grin
_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Mon Aug 29, 2005 4:33 pm    Post subject:  

Na..na.na.na.....boo..boo.....I was right, you were wrong!!! big grin !!!

Lol......I had no idea guys.
I'm sure glad I haven't screwing up my props.
Although you know, I bet the small amount that you take off for balancing really doensn't make that much difference in the shape of the prop!?

_________________
http://www.texomarc.org/
Back to top  
Ramz



Joined: 05 Nov 2004
Posts: 55
Location: New Brunswick, Canada

PostPosted: Fri Sep 02, 2005 6:16 am    Post subject: balancing  

don't forget to balance the hub also. Just sanding the blade doesn't always do the trick.
Back to top  
xtraflyr



Joined: 10 Sep 2005
Posts: 28
Location: Chester NJ

PostPosted: Tue Sep 13, 2005 12:52 pm    Post subject:  

Then why the hell does Dubro say to sand the front? mad I got it from their instructions for the prop balancer... I think on the EF site they say the front and the hub.. Confused
_________________
REAL PLANES HAVE A ROUND COWL AND a MONOWING!!!

1/3 Lanier Laser200,Brison 4.2 JR 8103, Hitecs

QQ YAK OS160 JR 8103, Hitecs

Midwest Cap 80" DA50 JR 8103,Hitecs

Funtana 90s YS 120sf, JR 9303 PCM,Hitecs
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive