 |
 |
| |
| Author |
Message |
fly boy 1

Joined: 12 Nov 2004 Posts: 286 Location: Milwaukee,WI
|
Posted: Mon Oct 10, 2005 5:30 pm Post subject: Eric's TOC Yak |
|
|
Well, I finally have her done boys. It's been a while, and I would most like to thank Zak, and John for their help in my endeavor, and many others, thanks guys, you made it happen .
All things aside, I am running a da Fiddy, and 5645's all around except for the rudder where I have an 8611A.
I am using a 3300 nimh pack on the reciever, and a 1700 nicad on ignition. After having the firewall pull out three times I got it right with some pro bond, and used gorrila glue to much success on the hinges which are clett style. I am using a futaba 319 reciever, and I have it mounted using 2 layers of double sided foam tape from 3M. My cg is about 7 -7.25 inches from the leading edge and I don't have an auw yet. The most difficult part of constrution on this plane is the hinging, it's that simple. On ailerons and elevator, I can get about 60-80 degree's of throw, not that i am using that much though.
Overall the plane is of very good quality, and should last for a long time, as long as my building was up to par. Here are some pics for now, I will have some more soon, and hopefully a video on the maiden or very close to it.
Again, thanks for all the help guys.
| Description: |
|
| Filesize: |
65.39 KB |
| Viewed: |
496 Time(s) |

|
| Description: |
|
| Filesize: |
64.54 KB |
| Viewed: |
496 Time(s) |

|
| Description: |
|
| Filesize: |
51.5 KB |
| Viewed: |
498 Time(s) |

|
Last edited by fly boy 1 on Wed Oct 26, 2005 5:24 pm; edited 1 time in total |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 1178 Location: Sunnyvale, CA
|
|
| Back to top |
|
 |
3D-kid330

Joined: 14 Nov 2004 Posts: 391 Location: Fremont, CA
|
Posted: Mon Oct 10, 2005 9:51 pm Post subject: |
|
|
Zak, I am your father. Haha
Great to see that you got er done! Nice job on the build, it looks like a fine bird. I have seen a few Yaks fly, and I think you'll like it. They float like nobodys business (they fly light) and are 3D beasts at the same time. Have fun, and good luck on the maiden!
Brandon
_________________ Lower??!! |
|
| Back to top |
|
 |
Radioflyer

Joined: 14 Sep 2004 Posts: 344 Location: Kalamazoo, MI
|
Posted: Tue Oct 11, 2005 5:53 pm Post subject: |
|
|
Beautiful plane man Get some flyin' pics up
_________________ God bless us all, and keep us safe.
www.bryanhusk.com/jay |
|
| Back to top |
|
 |
fly boy 1

Joined: 12 Nov 2004 Posts: 286 Location: Milwaukee,WI
|
Posted: Wed Oct 26, 2005 5:23 pm Post subject: |
|
|
Ok guys, I know it's been a while, but I finally ran up the motor for the first time. This thing is freaking awesome!! Took a little bit of leaning on the low end, and i might need to lean out top end a little bit. Otherwise it's awesome. Took a little while to heat it up tho, and figure out which way was right for the choke hehe. I'd say it was about 20 flips to start it, but it was in the 30's today, so thats why.
_________________ Team Greenfield News and Hobby
Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra
http://www.greenfieldnewsandhobby.com |
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Wed Oct 26, 2005 5:32 pm Post subject: |
|
|
sweet man. just make sure your batteries are fully charged nice one. definitely keep everyone updated, especially me. good luck and have fun! later
-JR
_________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
Montgomery

Joined: 07 Dec 2004 Posts: 58 Location: Tampa, Florida
|
Posted: Thu Oct 27, 2005 4:02 am Post subject: |
|
|
Looks Great, I think you are going to like this plane very much. I have about 15 flights on mine and it is the best flying plane I ever had. Flyes straight as an arrow and incredable 3D preformance. Even high alpha knife edge has very little coupling. The only thing I found is the Alum gear is just a little squishey. here is what I did to stiffen up a little and works great. Good luck, Not that you'll need it.
| Description: |
|
| Filesize: |
27.97 KB |
| Viewed: |
389 Time(s) |

|
| Description: |
|
| Filesize: |
24.23 KB |
| Viewed: |
389 Time(s) |

|
|
|
| Back to top |
|
 |
fly boy 1

Joined: 12 Nov 2004 Posts: 286 Location: Milwaukee,WI
|
Posted: Thu Oct 27, 2005 9:46 am Post subject: |
|
|
Thats an interesting idea on the landing gear. I weighed this thing yesterday, and it came in at about 17 pounds. This is a little heavier than I'd like, but it's ok. Somebody could definately get one in at 16, if you used more carbon stuff, ie landing gear, wing tube, etc. I also have to get a spinner now. I will probably get something on the heavier side tho, I think i need the nose weight. The cg is at about 7.5 inches or so.
_________________ Team Greenfield News and Hobby
Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra
http://www.greenfieldnewsandhobby.com |
|
| Back to top |
|
 |
fly boy 1

Joined: 12 Nov 2004 Posts: 286 Location: Milwaukee,WI
|
Posted: Sat Oct 29, 2005 6:22 pm Post subject: |
|
|
Well, I maidened it. It went kinda . I got it back in one piece tho! The motor came loose, I ran it out of gas,i lost a screw on the cowl, a screw almost came out on the cowl, and this thing was VERY tailheavy, I would say on the verge of unflyable! It flew pretty good tho, knifed very well, and did some baisic pattern well. I think these things vib'd loose from the motor being excessively rich. I am glad I got it back, tho, and am happy with the plane in general.
_________________ Team Greenfield News and Hobby
Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra
http://www.greenfieldnewsandhobby.com |
|
| Back to top |
|
 |
xtraflyr

Joined: 10 Sep 2005 Posts: 28 Location: Chester NJ
|
Posted: Fri Nov 04, 2005 3:29 pm Post subject: |
|
|
Sounds good man. Dude make sure that stuff is tight and loctited. You can loose a sweet plane by not making sure that it's ready.. Make sure the prop is tip and hub balanced. Was it tailheavy because the CG dimensions were off from TOC?
Good luck,and hope your next flights are more successful!!
Later
_________________ REAL PLANES HAVE A ROUND COWL AND a MONOWING!!!
1/3 Lanier Laser200,Brison 4.2 JR 8103, Hitecs
QQ YAK OS160 JR 8103, Hitecs
Midwest Cap 80" DA50 JR 8103,Hitecs
Funtana 90s YS 120sf, JR 9303 PCM,Hitecs |
|
| Back to top |
|
 |
| |
Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group
blueGray theme by Nuttzy
|