ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Going for Broke
8 posts
 
   3DBatix Forum Index -> Giant Scale
 
Author Message
Montgomery



Joined: 07 Dec 2004
Posts: 58
Location: Tampa, Florida

PostPosted: Wed Oct 12, 2005 11:54 am    Post subject: Going for Broke  

I'm finaly going to do it. I will be ordering my new plane this December and have been pondering what to buy. I wnt to go all out on this one. I have only 1 guideline.
IT MUST BE A YAK! But Which One????
3.3 meter CompArf
37% Cardin
40%TOC
37% QQ's
You get the idea. Any comments, suggestions, On planes & equipment would be greatly appreciated.
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Wed Oct 12, 2005 2:06 pm    Post subject:  

I think that the QQ's would be the best out of all. They are made top notch, as all of them are, and I hear lots of good thing about his planes.
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Wed Oct 12, 2005 4:23 pm    Post subject:  

I really like the carden yak, IMO the QQ yak are hideous looking, many would disagree with me, but its hard to go wrong with a carden. Best of luck. I just got some futaba 9152's and I love them... might think about giving them a shot.

John
Back to top  
Montgomery



Joined: 07 Dec 2004
Posts: 58
Location: Tampa, Florida

PostPosted: Thu Oct 13, 2005 3:02 am    Post subject:  

My 1st choice was the CompArf 3.3, is there any reason why this would not be a good choice( becides being a little pricy)
I do like the looks of the Carden, What motor do you have in it. Weight?
Back to top  
xtraflyr



Joined: 10 Sep 2005
Posts: 28
Location: Chester NJ

PostPosted: Sun Oct 23, 2005 5:16 am    Post subject:  

Montgomery wrote:
My 1st choice was the CompArf 3.3, is there any reason why this would not be a good choice( becides being a little pricy)
I do like the looks of the Carden, What motor do you have in it. Weight?


We have a guy in our club building a Composite Yak,and he's not totally happy with it,at least building wise.Esp. cutting out all those louvers and then having toget paint and paint them.. For the price of the kit you would think you would'nt have to do such a thing..

Just my 2 cents...

Later,
Frank

_________________
REAL PLANES HAVE A ROUND COWL AND a MONOWING!!!

1/3 Lanier Laser200,Brison 4.2 JR 8103, Hitecs

QQ YAK OS160 JR 8103, Hitecs

Midwest Cap 80" DA50 JR 8103,Hitecs

Funtana 90s YS 120sf, JR 9303 PCM,Hitecs
Back to top  
Montgomery



Joined: 07 Dec 2004
Posts: 58
Location: Tampa, Florida

PostPosted: Mon Oct 24, 2005 2:40 am    Post subject:  

Well, Decided to go with the Comp ARF 3.1 Meter SuperXtra with DA150cc.
Should be here Friday.
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Mon Oct 24, 2005 9:25 pm    Post subject:  

Sweet, did you get the new version with the wing tube rather than the blade spars? I am asking because that is the plane I will probably end up getting, but I want to do a little research first to make sure I get it right the first time. Smile

Thanks,
Brandon

_________________
Lower??!!
Back to top  
Montgomery



Joined: 07 Dec 2004
Posts: 58
Location: Tampa, Florida

PostPosted: Tue Oct 25, 2005 2:19 am    Post subject:  

Hi Brandon,
Dont know which on it will be. I was not aware there where two set-ups. I will let you know when it arrives. Unfortunately, my sales rep, " Bob Shapiro,lives in Miami, Fl. I hope he had time to place the order before the Huricane hit. I understand the whole area is without power. If all is on schedule, it should arrive Friday this week.
Will let you know & post pic's.
Back to top  
 
   3DBatix Forum Index -> Giant Scale All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive