ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

what foamie wil be the best?
15 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
D man



Joined: 13 Oct 2005
Posts: 4

PostPosted: Thu Oct 13, 2005 11:51 am    Post subject: what foamie wil be the best?  

hello every one
i'v got an e-flite park 400 brussless motor with gear .
and i wanna know what foamie from the foamies you have here on the web will be the best for this motor.
thanks
Dvir

BTW
first post,hope i'd like it here
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Thu Oct 13, 2005 12:09 pm    Post subject:  

There is no blanket answer for "the best" there are many options. Alota people on here like Daryl Cady foamies, I like the 3D Foamy Super Cap. There are a hundred foamys out there and everyone will tell you what the best one is. Good luck with whatever you choose. One good thing about the super cap is the motor mount is made for a gear box or outrunner where alot of the other foamys are outrunner designed and take alot of modification for a gearbox. Scence you have a gearbox keep that in mind. Have a good one.
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
D man



Joined: 13 Oct 2005
Posts: 4

PostPosted: Thu Oct 13, 2005 12:25 pm    Post subject:  

thanks for the answer but i ment which foamie for the web (this web,3DBATIX)will be good for the motor and that the motor could fit on without any problme (if there is one)
_________________
fear can hold you preson
hope can set you free
(i like this sentence,it's a smart one=])
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Thu Oct 13, 2005 6:50 pm    Post subject:  

o your going to hand cut one, gotcha best of luck.

John

_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Fri Oct 14, 2005 9:18 am    Post subject:  

D man wrote:
thanks for the answer but i ment which foamie for the web (this web,3DBATIX)will be good for the motor and that the motor could fit on without any problme (if there is one)


First, welcome to the site. 2nd, if you are going to make one with your setup. I think the Diablo is the best choice. It is a great plane and the plans are free. You will have to modify the front for the gear box and motor, but that shouldn't be too difficult to do.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
D man



Joined: 13 Oct 2005
Posts: 4

PostPosted: Sun Oct 16, 2005 12:59 am    Post subject:  

thanks but isn't the motor to big for tha diablo?
i thought about the PITTS S-2C because it's larger than the other fomies
+in his planes it has instructions for a body with gearbox motor
don't you think it's better?

_________________
fear can hold you preson
hope can set you free
(i like this sentence,it's a smart one=])
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sun Oct 16, 2005 12:30 pm    Post subject:  

Just renforce the hell out of it. Cant have to much power...sometimes. But it will kick butt and shouldn't be too much.
Back to top  
craigman



Joined: 31 May 2004
Posts: 105
Location: Redding, CA

PostPosted: Sun Oct 16, 2005 12:54 pm    Post subject:  

D man,
I run my Shocky with a 370 brushless motor and it's WAY overpowered! Just the way i like it!
A little overpower is just fine. Besides, you will have longer run times with your battery.

I'd check out the Diablo. Looks pretty cool. Thinking of building one myself after seeing Meyricks fly. WICKED flying plane!

Good luck!
Back to top  
D man



Joined: 13 Oct 2005
Posts: 4

PostPosted: Sun Oct 16, 2005 11:17 pm    Post subject:  

o.k then, i think i will go with the diablo
thanks for the help guys Smile

_________________
fear can hold you preson
hope can set you free
(i like this sentence,it's a smart one=])
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Mon Oct 17, 2005 7:21 am    Post subject:  

D man wrote:
thanks but isn't the motor to big for tha diablo?
i thought about the PITTS S-2C because it's larger than the other fomies
+in his planes it has instructions for a body with gearbox motor
don't you think it's better?


That motor combo will be fine. You will love this plane.

Keep us posted.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Mon Oct 17, 2005 12:10 pm    Post subject:  

hey tom! haven't seen you on the forums in forever!! pm me man, we gotta chat again.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Mon Oct 17, 2005 1:29 pm    Post subject:  

Butthead wrote:
hey tom! haven't seen you on the forums in forever!! pm me man, we gotta chat again.

Yeah, why don't we set up a 3db chat on aim or something

_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Mon Oct 17, 2005 1:29 pm    Post subject:  

Butthead wrote:
hey tom! haven't seen you on the forums in forever!! pm me man, we gotta chat again.

Yeah, why don't we set up a 3db chat on aim or something

_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Mon Oct 17, 2005 10:44 pm    Post subject:  

Yeah! Did you get your Katana flyin Tom?
_________________
Lower??!!
Back to top  
ace dogfigter



Joined: 23 Oct 2005
Posts: 10
Location: belgiun

PostPosted: Sun Oct 23, 2005 11:30 am    Post subject:  

Embarassed i need some help to i have a cyclone micro a tsunaie 10 and 350 mili amps 11volts kokam lipo
i've already build and cracht amini 3Dx but it was very slow and dificult to handle i think that the plane was to big for the engine ( or for the prop (8*4)) what plane (of this site ) do you propose and what prop will be the best
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive