ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

mods for foamy IIx
15 of 20 posts archived
 
   3DBatix Forum Index -> Foamies
 
Author Message
Zaimoran



Joined: 29 Sep 2005
Posts: 6

PostPosted: Mon Oct 17, 2005 9:33 am    Post subject: mods for foamy IIx  

I`m trying some mods to get rid of the rudder coupling, I really like the way it flys but if the KE get`s cleaner It will be unbeatable.
I have added 1` of foam (vertical) on top of the nose from the wing support to somewhere near the motor, and it is getting much better, I can do a suicide slide an KE loops but always need to stay on ailerons.
I will be trying more mods ... anyone have tried something similar?

Daniel
Back to top  
Zaimoran



Joined: 29 Sep 2005
Posts: 6

PostPosted: Mon Oct 17, 2005 9:45 am    Post subject:  

like this


STA40721.JPG
 Description:
 Filesize:  160.3 KB
 Viewed:  782 Time(s)

STA40721.JPG


Back to top  
foamfreak



Joined: 05 Nov 2005
Posts: 12
Location: central wi.

PostPosted: Sat Nov 05, 2005 6:24 am    Post subject: there is easier way  

just change the incidence of the top wing,, lots easier,, and there will be no coupling,, worked for me,, i built 5 now,, 1 degree does it.
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Fri Nov 25, 2005 3:01 pm    Post subject:  

could you kindly clarify if that's a 1 degree positive or negative incidence on the topwing?

thanks!

_________________
how do you want to fly?
Back to top  
Azryl



Joined: 10 Oct 2005
Posts: 8

PostPosted: Sat Dec 03, 2005 7:23 am    Post subject: bump  

bump Very Happy

1 degree positive or negative?
Back to top  
Azryl



Joined: 10 Oct 2005
Posts: 8

PostPosted: Sat Dec 03, 2005 7:24 am    Post subject: bump  

bump Very Happy

1 degree positive or negative?
Back to top  
Zaimoran



Joined: 29 Sep 2005
Posts: 6

PostPosted: Tue Dec 06, 2005 12:01 pm    Post subject:  

I can asume he uses negative incidence, most bipes stall better with convergence in LE, but that can be for pitch coupling, the complicated stuff comes whith roll coupling, this issue is a funtion of fuse /rudder area distribution and stab vertical positioning... I can“t remember if it has to rise or lower; in my case it has reverse coupling (tend to unroll)... well maybe someone else can help here...
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Thu Dec 22, 2005 7:56 pm    Post subject:  

Okidoki... the only part that I understood here is the negative 1 degree incidence for the top wing. smile

Is there a need to modify the foameIIx plans any further as far as what you mentioned here goes? This is for the rudder/fusealage area as well as stab positioning that you had mentioned.

I don't usually modify plans and this will be a first time. I'm certain that there will be pros and cons, and would like to learn what these might be.

Happy Holidays to everyone! smile

_________________
how do you want to fly?
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Thu Dec 22, 2005 7:57 pm    Post subject:  

Okidoki... the only part that I understood here is the negative 1 degree incidence for the top wing. smile

Is there a need to modify the foameIIx plans any further as far as what you mentioned here goes? This is for the rudder/fusealage area as well as stab positioning that you had mentioned.

I don't usually modify plans and this will be a first time. I'm certain that there will be pros and cons, and would like to learn what these might be.

Happy Holidays to everyone! smile

_________________
how do you want to fly?
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Thu Dec 22, 2005 7:57 pm    Post subject:  

Okidoki... the only part that I understood here is the negative 1 degree incidence for the top wing. smile

Is there a need to modify the foameIIx plans any further as far as what you mentioned here goes? This is for the rudder/fusealage area as well as stab positioning that you had mentioned.

I don't usually modify plans and this will be a first time. I'm certain that there will be pros and cons, and would like to learn what these might be.

Happy Holidays to everyone! smile

_________________
how do you want to fly?
Back to top  
foamfreak



Joined: 05 Nov 2005
Posts: 12
Location: central wi.

PostPosted: Sat Dec 24, 2005 7:33 am    Post subject: mods  

Ok guys heres the issue,, i have built over 30 fomie iix now,, most been CAD cut, and have NO issues,, but my hand cut ones do, heres the reason,, simply you CANNOT be accurate cutting the wing saddles to accuracy by hand,, you might think so,, but guess again, betweenb the 2 wings you can and easily will be 5 degrees off and it can be many different ways!, all my hand cut ones fly different,, all my CAd cut fly the exact same!!!,, i have posted somewhere i will try to find a accurate way to set and cut the PROPER incidence,, and i am cad cutting a fuse now to start the process. but im quite busy till after the holiday,, so patience please,, i will post the measurements and how to set them soon as i can.
its amazing how different a few degrees make on this design,, but i tested them completly and can assure all i found the fault,, and do have the proper info to correct it. the design is great,, its just the accuracy of the plans when blown up,, and how the knife cuts the depron.
Oh and its so cool to watch my cad cut the planes,, i can cut 30 kits out in 1 hour!!!!!!! to cool huh!! happy holidays!!!
Back to top  
Azryl



Joined: 10 Oct 2005
Posts: 8

PostPosted: Sat Dec 24, 2005 10:05 pm    Post subject: After the holidays  

Hiya, maybe a few cad cut kits are needed?

I'm definately interested in building the FoameIIx but have been reluctant to make my own until the bad flight reports for this model were analysed.

Maybe a PAYPAL system so overseas people can also get them?
Back to top  
Zaimoran



Joined: 29 Sep 2005
Posts: 6

PostPosted: Mon Dec 26, 2005 5:14 am    Post subject:  

sorry, but I have to disagree, a diference of 1,5 deg or more is way noticiable for the human eye, and if you cut over the plan it is almost imposible to be mistaken in that way, anyway efective incidence can be adjusted with aileron decalaje if you want to experiment, but it can only alter pitch coupling, and the mayor issues here, for this model, is roll coupling, because the asimetric braking effect of the surfaces when you put mayor deflection.

I have found that the vertical positioning of the CG can alter KE a lot in bipes so, you can experiment placing the lipos over and below the thrust line

Anyway, it is not my intention to be polemic, just want to help with my experience
Back to top  
foamfreak



Joined: 05 Nov 2005
Posts: 12
Location: central wi.

PostPosted: Mon Dec 26, 2005 8:42 am    Post subject:  

well disagree all you want,, i spent many hours testing this, and measuring,, simply put you are wrong!, do you have a cad cutter? or program? are you a engineer? bet not,, also i am in real life a aeronautical engineer!!! i design real planes and plane parts!! so dont try to bs my qualifications. i have built over 50 fomies, 30 of this design,, i know for fact what the numbers say,, and if you can say that all plans blow up and print equal,, well please dont build a real plane! and 2 degrees in a shord distance CANNOT be accuratly cut by the naked eye,, why do you think they make incidence meters?,, sorry i do not mean to sound harsh,, but i do know what im talking about,, and have volunteered to do this reserch for all,, if you dont want to believe it,, do what you want,, to all others im telling you the numbers dont lie
Back to top  
foamfreak



Joined: 05 Nov 2005
Posts: 12
Location: central wi.

PostPosted: Mon Dec 26, 2005 8:51 am    Post subject:  

also .. incidence DOES have a direct effect on roll!!!!!!!!!!!!!!!! and the effect you call braking with high control movements a accelerated stall of that surface,, and soon leads to the main wing. Also you say change incidence by the use of deflecting ailerons,, NOT SO,, it still dont change the other 90% of the surface its hooked to..its only a bandaid to the problem,, and a bad one at that. yes also the thrust must be accurate too i will have that measurement soon too. I am a AE. so i offer all this with absolute knowledge,, been modeling for 40 years,, and was a cropduster pilot for 20 years,, have over 10000 hours full scale flight time,,, so trust my calculations,,, better yet,, there all free!!!!!!
Back to top  
5 posts after this were not archived
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive