| |
| Author |
Message |
Fly-guy
Joined: 15 Jul 2004 Posts: 17 Location: Brisbane, Australia
|
Posted: Fri Jul 16, 2004 2:02 am Post subject: Zak, Meryick,I need your help (anyone can help if they want) |
|
|
Ok,
This is my first post but anyway. I was wondering if you guys could give me a hand into 3D. I am building a little .25 3D machine. It is a glow version of the Foamy Factory 3DX. I built it coz' its cheap and I couldn't care less if I crash it trying do do something I wouldn't do in my Spacewalker.
So here are my questions.
1. Would it be possible that you guys could do some more of those 3D instructional videos. I found 'em real helpful and I've been trying the tree on Aerofly.
2. Is this how you do a wall, fly in level, decrease the power, and hit full up elev.???
3. How the hell do you do a snap roll???
4. Do you guys know if I could get a Funtana here to Australia. Well now that I say that, I was talking to the owner of Model Engines and he told me that CMPro are bringing out a .40 size version of their 120 size Katana which is pretty much the same as a Funtana.
So if you could help me with those questions that would be great, oh and I was only asking Zak and Meryick coz they are the real good 3D guys (that I've seen fly)
Fly-guy
_________________ Learner of 3D, LOOK OUT!!!! |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 924 Location: Fremont, CA
|
Posted: Fri Jul 16, 2004 10:16 am Post subject: |
|
|
Welcome Fly-Guy, the 3DX glow version, what is the WingSpan and weight? The reason I ask is I hope you didn't use the original plan with a 36" wingspan and bolted a .25 engine cause it would be way too heavy to do nice 3D. The original 3DX was designed to fly around 13~14oz.
To answer your questions...
1. Would it be possible that you guys could do some more of those 3D instructional videos. I found 'em real helpful and I've been trying the tree on Aerofly.
We'll try to do some more, it's just that the G2 sim doesn't really perform the other 3D manuevers that well. I heard AFP pro works well doing 3D but I don't know if the sim has the option to view the radio sticks. You can also check www.flyingcirkus.com. They have some nice 3D instructional videos.
2. Is this how you do a wall, fly in level, decrease the power, and hit full up elev.???
Yes, also having a very light wing loading and AFT CG will perform the wall much better.
3. How the hell do you do a snap roll???
Now this is a grey area. People have different ways of performing snaps. Check out this thread... http://www.3dbatix.com/forum/viewtopic.php?t=21
4. Do you guys know if I could get a Funtana here to Australia. Well now that I say that, I was talking to the owner of Model Engines and he told me that CMPro are bringing out a .40 size version of their 120 size Katana which is pretty much the same as a Funtana.
If you find a hobby shop that carries Hanger 9 products, they should be able to get you the Funtana.
Hope this helps
_________________ --Meyrick--
Last edited by Meyrick on Fri Jul 16, 2004 10:52 am; edited 1 time in total |
|
| Back to top |
|
 |
3Dfanatic
Joined: 15 Apr 2004 Posts: 279 Location: Tacoma(area), WA
|
Posted: Fri Jul 16, 2004 10:46 am Post subject: |
|
|
Howabout real life vids guys?
_________________ -Aaron
cutimages.com
offthewallrc.com |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 924 Location: Fremont, CA
|
Posted: Fri Jul 16, 2004 10:55 am Post subject: |
|
|
| 3Dfanatic wrote: | | Howabout real life vids guys? |
Requires two video cameras that are synchronized, requires at least three people to do the video, and requires lots of time. It's just impossible to do for now.
_________________ --Meyrick-- |
|
| Back to top |
|
 |
Fly-guy
Joined: 15 Jul 2004 Posts: 17 Location: Brisbane, Australia
|
Posted: Fri Jul 16, 2004 7:04 pm Post subject: |
|
|
Ok meryick don't hurt me, coz' the plane I'm building is from the origial plans of the 3DX And Meryick have you ever fely how light a .25 is. The final plane wont way too much.
I have spoken to the two guys at my LHS and they both said it should fly and they have over 30 years flying and building experience between them so I think they know what the are on about. And beside I dont give a stuff if it does not fly coz its not that epensive. Well I had an awsome flight this morning on my dads Discovery hehehehe, inveted circuits hammerheads spins loops rolls knife edge ina tranier now thats funny, he nearly killed me coz its his plane not mine.
Fly-guy
_________________ Learner of 3D, LOOK OUT!!!! |
|
| Back to top |
|
 |
Fly-guy
Joined: 15 Jul 2004 Posts: 17 Location: Brisbane, Australia
|
Posted: Fri Jul 16, 2004 7:12 pm Post subject: |
|
|
Oops I forgot, there is not a single stocker of H9 planes that I can find in Aus so that SUCKS, might have to wait for the CMPro katana .40.
Fly-guy
_________________ Learner of 3D, LOOK OUT!!!! |
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 193 Location: Jackson, MS
|
Posted: Sun Jul 25, 2004 4:55 pm Post subject: |
|
|
Fly-Guy, A .25 size glow fun fly plane is too fun if you can handle it, but I would not recommend it as a first 3D plane. If you are new to 3D, I would recommend a larger plane to learn on or a SPAD ( SPA3D @ www.spadtothebone.com )
SPAD video http://www.spadtothebone.com/resourcesvideos.htm
As others have said, the 3DX is not going to hold up to that type of power. The motor would pull the plane apart. To me, the electrics are way easier to do 3D due to the light weight.
I have a .25 size Fun Fly I built called a Fat Free Taco. http://www.swanyshouse.com/tacoff/tacoff.html
Specs:
Wing Span: 36"
Weight: 2.5 - 3 lbs.
Wing Area: 450 Sq. In.
Wing Load: 12.8 Oz / Sq. Ft.
Engine: .25 BB 2-strk
Radio Gear: 4 - 5 Channel Radio, 5 micro servos
Mine actually came out to have a 36" span with 459 sq. in. of wing area with 15.4oz wing load, using 5 HS-85 MG. I have a Saito 40 on mine spinning a 12x4 and weighs 3.1 lbs. This plane has become my favorite plane right now. It will do any 3D stunt that you can think of or do. Hover, knife edge, wall, inverted wall, blenders, flat spin, inverted flat spin, parachute, etc... It will grow with your skills also. I love to do inverted harriers 2-3' off the ground. Great crowd pleaser. However, the plane flys like a rock without power, so make sure your engine is tuned correctly.
I can try to get you a video, but I can't promise anything. I have attached photos. I had a OS .25FX which was changed out for the Saito 40 later. MUCH BETTER performance with the 4-strk.
| Description: |
|
| Filesize: |
64.98 KB |
| Viewed: |
549 Time(s) |

|
_________________ Fly it hard and hover it low...
My RC Photo Page
Last edited by DTB on Sun Jul 25, 2004 5:08 pm; edited 3 times in total |
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 193 Location: Jackson, MS
|
Posted: Sun Jul 25, 2004 4:58 pm Post subject: .25 fun fly |
|
|
Photo 2
| Description: |
|
| Filesize: |
117.55 KB |
| Viewed: |
547 Time(s) |

|
_________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 193 Location: Jackson, MS
|
Posted: Sun Jul 25, 2004 4:59 pm Post subject: |
|
|
Photo 3
| Description: |
|
| Filesize: |
77.8 KB |
| Viewed: |
546 Time(s) |

|
_________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 193 Location: Jackson, MS
|
Posted: Sun Jul 25, 2004 4:59 pm Post subject: |
|
|
Last Photo
| Description: |
|
| Filesize: |
39.57 KB |
| Viewed: |
545 Time(s) |

|
_________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
Fly-guy
Joined: 15 Jul 2004 Posts: 17 Location: Brisbane, Australia
|
Posted: Sun Jul 25, 2004 10:38 pm Post subject: |
|
|
Thanks for your reply.
I should be able to handle it as a glow plane if not I might let it sit for a while while I learn 3D on something a little easier. Does anyone know how aerobatic a Spacewalker actually is. I know its not a lean mean 3D machine, but what are its limits? I ask beacause thats what I'm flying currently and I want to know how far it will take me before I need a serious aerobatic plane.
My plane is well on the way to being finished to. (still needs radio and motor) My covering looks like this, wings with blue leading edges and white trailng. Blue on to half of fuse. and whit on bottom half. To fluroescent orange 3DX decals on the fuse between the wing and stab. Blue and orange checkered rudder and elevator. Orange diagonal stripes on the right wing and another 3DX decal on the left wing. It looks good belive me. I'll post some pics when its completely finished.
Oh yeh, I know this is off subject but DTB, you wouldn't happen to be Paul Swany that I've had a couple of discussions with on RCUniverse.
Fly-guy
_________________ Learner of 3D, LOOK OUT!!!! |
|
| Back to top |
|
 |
Fly-guy
Joined: 15 Jul 2004 Posts: 17 Location: Brisbane, Australia
|
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 193 Location: Jackson, MS
|
Posted: Mon Jul 26, 2004 3:32 am Post subject: |
|
|
| Fly-guy wrote: |
Oh yeh, I know this is off subject but DTB, you wouldn't happen to be Paul Swany that I've had a couple of discussions with on RCUniverse.
Fly-guy |
Sorry, No I am not Paul. I have had many conversations with him myself. Very nice guy...
_________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
Chris

Joined: 16 Apr 2004 Posts: 270 Location: Toronto, Canada
|
Posted: Mon Jul 26, 2004 12:41 pm Post subject: |
|
|
i'm confused are you makign this out of depron ??
_________________ -Chris-
3D Foamy |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 924 Location: Fremont, CA
|
Posted: Mon Jul 26, 2004 10:01 pm Post subject: |
|
|
| Chris wrote: | i'm confused are you makign this out of depron ?? |
I think that was the original plan.
_________________ --Meyrick-- |
|
| Back to top |
|
 |
| 15 posts here were not archived |
Fly-guy
Joined: 15 Jul 2004 Posts: 17 Location: Brisbane, Australia
|
Posted: Thu Aug 19, 2004 9:42 pm Post subject: |
|
|
Yeh, well, I might look at buying from over seas. It'll proabaly work out cheaper. I will report back tonight with some of the matsh done. I have Indoor cricket soon so I cant be too long.
Fly-guy _________________ Learner of 3D, LOOK OUT!!!! |
|
| Back to top |
|
 |
Fly-guy
Joined: 15 Jul 2004 Posts: 17 Location: Brisbane, Australia
|
Posted: Sun Sep 19, 2004 11:55 pm Post subject: |
|
|
got my motor, higher TT25 for 90aus dollars, second hand run once in perfect condition, and as for servos im using JR 331 all round except throttle.
Fly-guy _________________ Learner of 3D, LOOK OUT!!!! |
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 189 Location: Jackson, MS
|
Posted: Thu Oct 21, 2004 9:04 am Post subject: |
|
|
Guys, I flew my Fat Free Taco yesterday that I have been talking about and luckily I had my digital camera with me, so I made a couple of videos using my Digital camera to show off the plane to you. There is nothing like a video to back up what you have to say.
http://www.3dbatix.com/forum/viewtopic.php?p=1966#1966 _________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 189 Location: Jackson, MS
|
Posted: Sat Jan 08, 2005 8:04 am Post subject: |
|
|
| Fly-guy wrote: | I just had a look at the Taco, and as soon as my profiles gone I am so getting one of those babies. it rocks. Do you know if they post em out to Australia. I'm forever whining about being so bloody far away from everyone down here, its really annoying when you're trying to buy stuff from overseas.
But anyway, I will get a Taco sooner or later.
Fly-guy |
Fly-guy, I'm just touching base with you and not sure if you got a Taco yet, but I recently placed wing filets on my FF Taco. One immediate difference is that the tail and backbone sections are significantly stiffer now with very little to no wobbling noticed. That alone should help some. I thought the fiberglass rod was good and it is, but it is even stiffer now.
 _________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
| |