| |
| Author |
Message |
Gezoid

Joined: 24 May 2004 Posts: 161 Location: UK
|
Posted: Tue Nov 08, 2005 1:54 pm Post subject: Hitec servos |
|
|
Just bought 5 Hitec 5645's for my H9 Extra 260 and am sooo disappointed. I thought from all the talk across all the forums that Hitec were comparable to Futaba, but no way! These things are junk! There's absolutely no precision whatever, they blunder around like the gears are made of foam or buried in axle grease something. They feel like they're way behind what's happening at the stick. My Futaba's are like precision machines by comparison - even a 3001!!
Yeah, the Hitec has the stall torque and I guess the transit time is up to spec', but you just don't feel connected, know what I mean? Waggle the stick fast and they're way behind.
So much for saving money. Now I have to unload these and get something else. Are JR up to Futaba standard cos I fancy 8411's as they're cheaper than the Futaba 9151's I'd like to have. _________________ Ya torkin' ta me? |
|
| Back to top |
|
 |
xtraflyr

Joined: 10 Sep 2005 Posts: 28 Location: Chester NJ
|
Posted: Tue Nov 08, 2005 3:04 pm Post subject: |
|
|
WOW!! I own alot of the Hitec servos to me they seem very precise. I have the 5945's and their awesome. As much as I move the stick they move. I usually have to add more Expo when I use these servos..
Maybe it's just the Futaba radio!!
Just Kidding!!
later, frank _________________ REAL PLANES HAVE A ROUND COWL AND a MONOWING!!!
1/3 Lanier Laser200,Brison 4.2 JR 8103, Hitecs
QQ YAK OS160 JR 8103, Hitecs
Midwest Cap 80" DA50 JR 8103,Hitecs
Funtana 90s YS 120sf, JR 9303 PCM,Hitecs |
|
| Back to top |
|
 |
craigman

Joined: 31 May 2004 Posts: 105 Location: Redding, CA
|
Posted: Tue Nov 08, 2005 8:34 pm Post subject: |
|
|
What do you expect from a $60 digital servo?
You picked the cheapest ones. The 5645's are strong, but slow. Step up to the pay window and buy some 5945's. They'll blow your door off! They're way faster than a 8611 or 8411.
What voltage are you running them? 4.6v? |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Tue Nov 08, 2005 11:43 pm Post subject: |
|
|
| I just bought a 6965hb it is very fast .08 at 6volts 111oz. I have Jr 9411s also which is a close servo in this class .15 at 6volts 82oz to the hitec 6965hb. The JR is about 15 dollars more the hitec. The hitec is faster and stronger. But the downfall is it does not step as well as the Jr when you move the sticks slowly the servo makes steps that you can see the Jr does not. But for full on 3d who cares about if one-steps 1/200th of an inch and the other steps 1/300th of an inch. Your making large stick movements for the most part that don’t need to be that precise besides I don’t think any RC pilot could tell the difference of that. Gezoid you a comparing two servos that are in two different classes. |
|
| Back to top |
|
 |
Gezoid

Joined: 24 May 2004 Posts: 161 Location: UK
|
Posted: Wed Nov 09, 2005 7:44 am Post subject: |
|
|
Yeah, I guess I am comparing two different classes of servo, I never expected them to be so imprecise though. The centering is fairly lax too. I read somewhere that Hitec's speed figures are measured on the fly and not from a standing start like everyone else's. Judging from the performace of the ones I've got I'd say that was true. Yep, I'm running 4.8volts. What should I use? Direct to a 7.2 Lipo maybe...
I'll keep 'em for a warbird or something, it's all they're fit for. _________________ Ya torkin' ta me? |
|
| Back to top |
|
 |
craigman

Joined: 31 May 2004 Posts: 105 Location: Redding, CA
|
Posted: Wed Nov 09, 2005 8:06 am Post subject: |
|
|
4.8 volts? You crazy? ALWAYS run servos on 6 volts! Makes them faster and makes them have stronger holding power.
If you want a cheap digital servo, the 5645's are the way to go. But if you want a faster, stronger, better centering servo, you'll have to step up to a 5945, or 9411. |
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 460 Location: Danville, VA
|
Posted: Wed Nov 09, 2005 11:04 am Post subject: |
|
|
I own several HS-5645 and they work great for me. On 6V. Plenty of speed for me also. Sure, they aren't the most expensive or the fastest, but I wouldn't and couldn't call them garbage. _________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Wed Nov 09, 2005 11:14 am Post subject: |
|
|
| Gezoid craigman is right if you are looking for a high quality servo go with 5945mg. All high end servos should be ran at 6 volts. Its like going and buying a fast sports car and complaining that the engine is knocking because you put cheap gas in it. Do not hook the servos directly to 7.2-volt lipo battery you will cause the servos to fail. There are no numbers out there how long they will last at 7.2 volts but they will not. They might fail the first day or in six months who knows but they will fail. The problem is that 7.2 volts is the nominal voltage of the pack the voltage is higher when the pack is charged 8 plus volts. Use your lipo pack but with a regulator. |
|
| Back to top |
|
 |
Gezoid

Joined: 24 May 2004 Posts: 161 Location: UK
|
Posted: Wed Nov 09, 2005 11:36 am Post subject: |
|
|
I was joking about the 7.2 Lipo Mikey I was being sarcastic.
Problem here is that there's a big hole in the Futaba range at about 80 to 90 ozs unless you pay big bucks. JR have the perfect servo in the 8231 digital, but I hear lots of stories about JR too so am not keen on buying JR either after my Hitec experience, once bitten twice shy. For about the same money as the JR8231 I could have Futaba 9402 - coreless but not digital. So maybe I will step up to the pay window and get the Futaba 9151's I should have bought in the first place... _________________ Ya torkin' ta me? |
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Wed Nov 09, 2005 11:36 am Post subject: |
|
|
if you plan on using 9411's on a 50cc size 3d plane, then its time to think of plan B. i used to have 9411's all around(besides rudder, 8611) on my 50cc extra. i found my elevator servos stripped one day after a few 3d flights. so i replaced them with 645's. a few weeks later, my aileron servos(9411's) did the same thing. stripped the weakest gear. i then replaced them with 645's as well so i decided to open them up and see if i could get a new gear for them. it ended up being the only plastic gear in the train breaking. it is a VERYYYY weak gear. the tiniest teeth you will ever see and it was shattered. i strongly discourage use of them on anything 50cc and up. i guess that looks like a little more than $0.02 but oh well  _________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
Montgomery

Joined: 07 Dec 2004 Posts: 58 Location: Tampa, Florida
|
Posted: Thu Nov 10, 2005 3:35 am Post subject: |
|
|
Dont know what you have heard about JR, but I have always had good luck with them. Here is a little food for thought.
Futaba doesnot recomend using 6 volt on the 9151's.
And only has 132oz of torque.
For $10.00 more, you can get the JR8611A's. That will give you 188oz more than the Futaba (total 320 )and you will alwasy have these if you decide install them on a bigger modle. Can be used on 6 volt, And never have to worry about striping the gears. The centering is unbeatable also.
It may be a little overkill for now, but in the long haul I think it will pay off.
If your willing to try Hitec again, for less than $100.00 you can get the 5955's. (333oz) you should not have the troubles like you have with the 5645's. |
|
| Back to top |
|
 |
craigman

Joined: 31 May 2004 Posts: 105 Location: Redding, CA
|
Posted: Thu Nov 10, 2005 7:53 am Post subject: |
|
|
Yep, i have to agree. JR servos are awsome for sure. Excellent service too.
I personally run 5945's. Another awsome servo IMO. I also just installed a single 5955 on my rudder of my 35% to take the place of two 5945's. So far i'm really happy with it. I can't tell any difference between the two setups. I might go all 5955's on my next plane! |
|
| Back to top |
|
 |
Gezoid

Joined: 24 May 2004 Posts: 161 Location: UK
|
Posted: Thu Nov 10, 2005 1:16 pm Post subject: |
|
|
Dunno about 5945's - aren't they 5645's but with a coreless motor? Can't see 'em being much better except for a little more transit speed and torque maybe.
What's everyone think of the 6Volt capable JR 8425 then? 155oz .19. and a reasonable price (relatively). _________________ Ya torkin' ta me? |
|
| Back to top |
|
 |
Montgomery

Joined: 07 Dec 2004 Posts: 58 Location: Tampa, Florida
|
Posted: Fri Nov 11, 2005 2:29 am Post subject: |
|
|
I beleieve the European market 8425 is the exact same servo as the American 8411. If thats the case IMO that is a very good servo.
????what do you pay for the 8425 in the UK???? |
|
| Back to top |
|
 |
Gezoid

Joined: 24 May 2004 Posts: 161 Location: UK
|
Posted: Fri Nov 11, 2005 3:13 am Post subject: |
|
|
The 8425 is cheaper at £63 ($109) than the 8411 at £69 ($120) - for comparison the Hitec 5645's are £33 ($57) and the 5945's at £50 ($87) and the Futaba 9151's I would have liked but can't really afford are £72 ($125) - when you gotta buy five that's a lot of loot! These prices are a rough average - some places have them a little dearer, some places a little cheaper, only a dollar or two in it though. We get scammed here for the good quality stuff.
Hitec 5645 x 5 = £165 - $287
Hitec 5945 x 5 = £250 - $435
JR 8425 x 5 = £315 - $548
Futaba 9151 x 5 = £360 - $627
You look at the numbers and the spec's who wouldn't think Hitec? _________________ Ya torkin' ta me? |
|
| Back to top |
|
 |
Montgomery

Joined: 07 Dec 2004 Posts: 58 Location: Tampa, Florida
|
Posted: Fri Nov 11, 2005 10:40 am Post subject: |
|
|
I see your point. But if you are concidering the 8425 / 8411, I would defiantly go with the 8611A's. They are more than twice the servo and less expencive if purchased in the US.
JR 8611A @ $99.95 = 499.75
Shipping to UK = 25.00
Total 524.75 |
|
| Back to top |
|
 |
Gezoid

Joined: 24 May 2004 Posts: 161 Location: UK
|
Posted: Fri Nov 11, 2005 3:32 pm Post subject: |
|
|
Okay, had my friend around tonight and he was askin what the hold up was on the Extra, so I told him I wouldn't use the Hitec's yadda yadda yadda. He told me I was an a**hole and I ought to try 'em before I got to spending truckloads of cash. To be honest he was gettin right up my nose!
Anyway we set up a hitec and a futaba for comparison and fitted them with 1 1/4" arms. To be honest back to back like that there didn't seem to be too much difference. The main thing is if you move to full deflection and then let go of the stick the Futaba snaps back to centre whereas the Hitec starts back good but kinda slows towards the centre. It isn't much, but it's there. A bit treacly. Oddly, they were better with a load on them.
I have to say I can't see it making a lot of difference "in the real world". So I'm gonna try 'em and see what happens. I hope you guys are right about them! Anywayz, we'll see. Thx for all the advice and stuff. Jeez, that guy nags more than my ex wife!
Stevo - if one of those suckers hangs up and kills my model, you're payin'!!  _________________ Ya torkin' ta me? |
|
| Back to top |
|
 |
| |