ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

landing gear on F90
2 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
paulaly



Joined: 16 Feb 2005
Posts: 36

PostPosted: Thu Nov 17, 2005 6:20 pm    Post subject: landing gear on F90  

Hey guys,

I have a F90 with a Ys110 and a 16-6 prop. Now the problem I have is the landing gear. I fly off a tarmac runway and alot of the time the stock landing gear will flex so much that it chews my prop, which means I have to replace normally because I don't like to shave the prop to an even size. Now these are not really hard landings, it seems to flex alot anyway. Has anybody got an idea how to solve this. I am thinking of getting a carbon gear that is taller but that is more costly. I have also thought about putting bigger wheels on but then I am adding weight because the foam tires get chewed faster. Has anybody experienced a weak landing gear here
Thanks
Paul
Back to top  
Montgomery



Joined: 07 Dec 2004
Posts: 58
Location: Tampa, Florida

PostPosted: Fri Nov 18, 2005 9:07 am    Post subject:  

Hey Paul,
I had the same thing going on with my 30% TOC YAK. Here is what I did and seemed to work out very well. The 440 rod available from your local hobby shop. The springs from a good hardware store. total cost about 5 bucks. much cheeper than carbon gear.



Fire wall 043.jpg
 Description:
 Filesize:  47.94 KB
 Viewed:  77 Time(s)

Fire wall 043.jpg



Fire wall 033.jpg
 Description:
 Filesize:  52.25 KB
 Viewed:  77 Time(s)

Fire wall 033.jpg


Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive