ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Laying up carbon landing gear
5 posts
 
   3DBatix Forum Index -> Workshop
 
Author Message
Balsa+Nitro



Joined: 21 Jul 2004
Posts: 22

PostPosted: Wed Jul 21, 2004 5:22 pm    Post subject: Laying up carbon landing gear  

I read Zac explaining how to lay up carbon landing gear. I want to make a taller landing geat for my 28% Wild Hare Edge. Where do you recommend I buy suplies? Thanks.
_________________
"...The only thing that counts is faith expressing itself through love." Galatians 5:6
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Wed Jul 21, 2004 5:36 pm    Post subject:  

tap plastics if there is one near you.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Wed Jul 21, 2004 6:14 pm    Post subject:  

or online http://www.tapplastics.com/
_________________
--Meyrick--
Back to top  
Balsa+Nitro



Joined: 21 Jul 2004
Posts: 22

PostPosted: Wed Jul 21, 2004 9:50 pm    Post subject: Tap Plastics  

Tap Plastics lists epoxy, polyester, and vinyl-ester resins as compatable with their 5.7oz. carbon.

They also list these three carbon cloths:
Carbon 45% Aramid 55% XC-1168 with vinyl-ester resin.
Graphite Carbon • 282
Standard Carbon Twill • 284

1. Is there a combination of cloth and resin you can recommend?
2. Where do I get the foam and mylar to cut and form the landing gear in?

_________________
"...The only thing that counts is faith expressing itself through love." Galatians 5:6
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Thu Jul 22, 2004 5:00 pm    Post subject:  

I dont know that much about the carbon to reccomend a combination, i have the 5.7 oz, and their standard epoxy.

I dont know a specific place to get the foam.

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
 
   3DBatix Forum Index -> Workshop All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive