| |
| Author |
Message |
BentOnFlyingRC
Joined: 13 Nov 2004 Posts: 6 Location: stansburry park ut
|
Posted: Sun Nov 27, 2005 8:29 pm Post subject: what engine for funtana 90 at 4700 ft??? |
|
|
fellas and any ladies that may be out there
i have a new funtana 60/90 and i live at roughly 4700 ft
a buddy of mine has the same plane with the os 160 in it..too heavy!!!! by the time he got it balanced it was pretty much a flying brick. so i have 3 engines in mind ys110 ys 140 sport or saitos new 125..andybody got any info on the new saito 125? aside from its coming in late dec..feedback anybody??? |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 1178 Location: Sunnyvale, CA
|
Posted: Sun Nov 27, 2005 10:56 pm Post subject: |
|
|
There are two ways you can go, either super light, or super powerfull. If you want to go for power, then go with the Saito 180. I have a funtana 90 with a YS 120 and would MUCH rather have the 180. I am at sea level, so if you are worried about weight, you might want to go with somethin smaller. No, the 180 is NOT too big... it seems to be the perfect match!
If you want to keep it light, you might want to go with lightweight servos and maybe a saito 100? It would be pushin it i think. If you could keep the plane really really light it might work.
I would put the saito 180 in that sucker and let'r rip!
hope this helps a little bit _________________ Zak West
www.DesertAircraft.com
www.Smart-Fly.com
www.DarrolCady.com
www.CoolRunningUSA.com
www.TanicPacks.com |
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 460 Location: Danville, VA
|
Posted: Mon Nov 28, 2005 8:44 am Post subject: |
|
|
I would agree the Saito 180 would be a great choice. If you are a YS person, I would say a YS 1.40 would work well also.
My YS 1.10 works great at Sea Level and so does a Saito 150, but at the height, they may suffer some. You need dissplacement which is the key for your situation. _________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Mon Nov 28, 2005 9:43 am Post subject: |
|
|
| Use the 180 but don't forget to pin the firewall. |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 1178 Location: Sunnyvale, CA
|
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 460 Location: Danville, VA
|
Posted: Mon Nov 28, 2005 1:11 pm Post subject: |
|
|
| 3dbatixkid wrote: | | DTB wrote: | | I would say a YS 1.40 would work well also. |
The 140 would be plenty of power, but I think its tooooo heavy. |
I think they are pretty close in weight actually.
Saito 1.80 Engine (Only) Weight: 31 oz (880g)
YS 1.40 Sport and DZ (w/ muffler) Weight: 33 oz (930g)
The Saito 1.80 muffler would add roughly 1-2 oz.
Just for kicks, the YS 1.60DZ is 33 oz also (930g). I'm not sure if that is with the muffler or not.
That would be a blast with the YS 1.60DZ _________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Mon Nov 28, 2005 2:11 pm Post subject: |
|
|
Satio 180 is 34 oz with mufler
YS 140DZ is 33 oz with mufler |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 1178 Location: Sunnyvale, CA
|
|
| Back to top |
|
 |
Shaun

Joined: 10 Sep 2004 Posts: 342 Location: texas
|
Posted: Mon Nov 28, 2005 3:38 pm Post subject: |
|
|
I had a Saito100 in mine. I'm at about 700'sl. It would hover. But if it fell out it didn't have enough power to pull it out.  _________________ http://www.texomarc.org/ |
|
| Back to top |
|
 |
BentOnFlyingRC
Joined: 13 Nov 2004 Posts: 6 Location: stansburry park ut
|
Posted: Mon Nov 28, 2005 6:19 pm Post subject: |
|
|
fellas
ok after doing some research weight on all of these motors are fairly the same..and like zak said for simplcity the saito is the way to go. i myself have never owned a ys and i have heard horror storries but there is this older cat at my local field that makes em look easy. everytime he shows up he sets up starts it and i never see him tune his ys 140 weird huh. so i'm leaning towards a saito. my lhs owner says the new saito 125 is made in a 100 case and is estimated to make just as much power as a saito 150 any of you hear about this or is my lhs just trying to be a salesman?lol i wanna keep this thing as light as possible. saito 150 is 30oz saito 180 is 31ozso either one would be a good choice the question is...can i get the cowl to fit around either of these engines?? _________________ Whoaaaa!!!! what just fell off my plane?? |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Mon Nov 28, 2005 10:00 pm Post subject: |
|
|
| The YS 110 will out turn the Satio 125 if you are looking at that size engine I would go with the YS 110. I am not a die hard YS man but I would defently give the YS 140 another look. My expernce with YS has been 50/50 my YS 63 gave me nothing but problems. My YS 110 I have on my Funtana I broke it in never messed with it again I have put 6 gallons through it and it runs as strong as the day I got it I have to say it is a great engine. |
|
| Back to top |
|
 |
BentOnFlyingRC
Joined: 13 Nov 2004 Posts: 6 Location: stansburry park ut
|
Posted: Tue Nov 29, 2005 11:44 am Post subject: |
|
|
ok everybody i'm a gambling man...lol
after going over the fuse and looking around at things that i could possibly shave off without compromising the integrity of the fuse. i found a few items that could come off and shed some weight. since my there is snow on the ground and my flying season is officially over this is what i am planning. slowly lighten this funtana over winter,wait for the debut and the reviews of the saito 125 and if all goes well stick a saito 125 in there
mikey
the only 4 stroke brand i have ever owned is saito i was willing to venture into the ys brand but you haveing 50% good luck wasnt too encouraging lol...so if my gamble doesnt work out the next engine considerations will be in this order saito 150 saito 180 ys 140..although these engines would be my first choice above the saito 125..the concern is sqeezing all the engine under the cowl and make it look decent. anybody out there put any one of these engines in a funtana 90 if so please send pics of how it looks _________________ Whoaaaa!!!! what just fell off my plane?? |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 1178 Location: Sunnyvale, CA
|
Posted: Wed Nov 30, 2005 9:02 am Post subject: |
|
|
| BentOnFlyingRC wrote: | | my lhs owner says the new saito 125 is made in a 100 case and is estimated to make just as much power as a saito 150 any of you hear about this or is my lhs just trying to be a salesman?lol |
Well since the 100 is a bored out 91, i dunno if they can go too much farther before they bore through the side of the cylinder. i think that it will be a slightly larger case, but Saito has found the thinest wall that they can go to, and now they can make really light weight engines. i would not expect the 125 to put out the power of a 150, unless the engine is supercharged. "There is not replacement, for displacement" _________________ Zak West
www.DesertAircraft.com
www.Smart-Fly.com
www.DarrolCady.com
www.CoolRunningUSA.com
www.TanicPacks.com |
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 460 Location: Danville, VA
|
Posted: Wed Nov 30, 2005 6:46 pm Post subject: |
|
|
I have a few YS engines and I also have a few Saito engines and they all run great. I honestly think the horror stories coming from people with YS engines really don't know how to adjust a YS engine or they have gasket problems which would make any engine run poorly. For both my YS and Saito engines, I will tune for the day and go fly. Takes about 15 secs at the most, if I have to tune at all. Usually it is seasonal. When the weather changes, I have to adjust slightly due to the density of the air changing. Also, some people don't use an adequate glow plugs in YS engines also or use low nitro levels. YS loves nitro and so does a Saito. I run 30% in my Saito 40 btw and it performs lovely.
I seriously doubt the Saito 125 could compare to the YS 1.10 simply because the YS 1.10 and the Saito 150 are extremely close in performance. My FT90 with a YS 1.10 and my friend's FT90 with a Saito 150 perform almost exactly the same. The YS from what I have notice has a snapper response to the throttle through in a hover, but I may just be bais toward the YS in that circumstance. If I could afford the YS 1.40 or the 1.60, I would love to have it also on a YAK 54. _________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
Jynx13
Joined: 06 Jan 2005 Posts: 45
|
Posted: Wed Nov 30, 2005 9:30 pm Post subject: |
|
|
| I have been flying my F90 with a Saito 180 for over a year now with no problems. Plenty of power, never had a dead stick, and did i mention plenty of power? |
|
| Back to top |
|
 |
BentOnFlyingRC
Joined: 13 Nov 2004 Posts: 6 Location: stansburry park ut
|
Posted: Thu Dec 01, 2005 12:58 am Post subject: |
|
|
jynx13
you have a saito180 in your 90sized funtana? would you by chance wanna take pics of the engine and how it looks with the cowl mounted??
dtb
oh i seen the older cats at my local field with ys engines and i swear i never seen them tune their engines they just fill and fly. so i know they can run reliableon the other hand i seen warbirds drop like stones because they werent tuned right. this is the kinda stuff that makes you wanna have a pez dispenser filled with happy pills...lol
zak
i agree with you 100% no replacement for displacement
i would happily drop a saito 150 or a 180 if i knew how how the cowl fits with the engine. for some odd reason as i get older i like my planes to look nice aesthetic pleasing you might say. tomorrow i will build a foam engine with the dimensions provided by horizon . or hopefully someone will come forward a post some pics of what a saito 150/180n looks like in that plane _________________ Whoaaaa!!!! what just fell off my plane?? |
|
| Back to top |
|
 |
| |