ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

foamie 11X
9 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
foamfreak



Joined: 05 Nov 2005
Posts: 12
Location: central wi.

PostPosted: Mon Nov 28, 2005 7:30 am    Post subject: foamie 11X  

hello to all building the IIx, ive experimented with the so called problem with all asking about rudder coupling,, i built a test model,, hand cut ,, and made it with a way for me to change upper wing incidence to correctly get accurate incidence,, and change it to better the flying character. see i have 7 fomie IIX all fly flawlessly,, but if you HAND CUT them you can be off up to 5 degrees on the incidence of the wings,, and not even notice it,, i hand cut one and it was off 5 degrees from the one i CAD cut.. all mine were cad cut that fly flawless,, the hand cut has some coupling, tucking compare to my CAD cut models,, i will CAD cut a fuse and try to correctly find a way to accuratly measure the wing saddle measuerments for all to use to accuratly hand cut it ,, this will take me some time and thought and experimenting so be patient, but i can tell you that the hand cut model is way different than my CAD mobels,, and slight changes make it a whole new bird,, the monoplanes are not near as picky,, but the bipes are very picky! you wouldnt think so,, but its true.
Also to all,, i can CAD cut all the designs,, the extra, diablo, pitts, foamieIIx, it took a lot of time to set up my CAD hot wire cutter, and lots money!! but if anyone interested i can sell you cad cut models of these.
be patient i will try to get specs on that incidence posted soon as i can,, im a bit tight for time over the holidays.
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Mon Nov 28, 2005 11:34 am    Post subject:  

FoamFreak,

Thats great that you found out all this information! It is surprising that a few degrees of incidence make such a huge difference. Glad you found all this out and thank you for taking the time do to so! Applause

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
foamfreak



Joined: 05 Nov 2005
Posts: 12
Location: central wi.

PostPosted: Mon Nov 28, 2005 11:58 am    Post subject:  

Hello Zak,, thanks for the reply,, im just trying to do my part to contruibute here,, these are by far the best foamies,, so thank all you guys for making them possible. i am trying to get my video uploaded,, but i got to ask someone that knows how to do it. i have a really cool vid of the foamie IIx and the extra. i run my CG very quite far back. these planes will torque roll all day!!!
also i have a tail stiffner mod for the extra and diablo that weighs almost nothing,, and NO tail twist,, and strengthens fuse alot,, when i can figure out how to post pic i will,, and ill try to get the incidence calculations here soon,, but it may be a few weeks,, so busy this time of year.
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Wed Nov 30, 2005 8:13 am    Post subject:  

Im glad you like the planes! I understand the busy part, i know just how that goes. If you want to post a pic, make sure that it is 640x480 and then when you post, click browse and go find your pic. You can email them to me if you need them resized.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
foamfreak



Joined: 05 Nov 2005
Posts: 12
Location: central wi.

PostPosted: Mon Dec 26, 2005 1:04 pm    Post subject:  

Hi Zak, i was very disappointed with some of the crowd responding to my other post on the mods for the fomie iix i spent like 2 weeks doing the work to find the correct info,, and it tested very much,, but i now refuse to share the info due to a few people,, if you want it when its ready PM me,, but i will not post and dont want it shared
Back to top  
pkruse



Joined: 26 Dec 2005
Posts: 2

PostPosted: Mon Dec 26, 2005 4:17 pm    Post subject:  

Zak, you may want to check out ff's generally rude behavior on the other threads before waisting your time on him.
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Tue Dec 27, 2005 2:39 pm    Post subject:  

I think what foamfreak has done is invauable. To take that much time to HELP others is a great thing! I have designed two of my own foamies with good success, but there was certainly room for improvement in which I fixed with programming. If I had more knowledge of flight design I might take more time to improve the planes. Please remember foamfreak that not everyone has the same opionion, but everyone is entitled to their own. I personally think what you are doing is great Very Happy
_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Tue Dec 27, 2005 6:29 pm    Post subject:  

Come on, if you have a personal problem keep it between yourselves. If it's not beneficial, we don't need people arguing. Keep it clean and civil everyone.
_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
foamfreak



Joined: 05 Nov 2005
Posts: 12
Location: central wi.

PostPosted: Mon Jan 02, 2006 1:59 pm    Post subject: sorry for rudeness  

Hello all, first i want to apoligize for my rudness on the posts, i had e really really bad day that day, and i took it out on the first target,, i was wrong to do that,, please accept.
now i will want to also tell all that yes this is just not something i fiddled with only a little bit,, but made a challenge to take a already good design and perfect it,, i did spend well over 100 hours just testing my calculations,, and what i found was accurate, not just i think, but truly tested to the max and proven,, i bey total time was twice that,, and for no benefit of mine. but for all you. if you dont want to believe what i found ,, well ok,,, but your loss. i have decided not to give up and will continue for alls benefit,, for those of you that appreciate thanks,, for all that disagree, thats ok,, ill live with that,, but i wish i could show you in depth of what i have done,, it would amaze you,, it amazes me!!!! hehehe,, well happy new year to all,, forgiveness asked,,,foamfreak
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive