ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

ESC Setup???
2 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
maverick0408



Joined: 22 May 2004
Posts: 2
Location: Canada

PostPosted: Thu Dec 01, 2005 9:09 am    Post subject: ESC Setup???  

Hey guys,

I need some help to program my phoenix 25 esc to get the best out of it!
Here`s my current setup that is on my e-flite tribute but it will go on another foamie from here!

-Park 400 Outrunner 740Kv (Same motor as an Axi 2212/34)
-Phoenix 25 ESC
-Thunder Power 860mAh 3 Cell Lipo
-GWS 11 x 4.7 Prop
-4 Jr servos with receiver

What do you think about this setup? Does the battery is big enought for the motor bcz I don`t want to fry anything! I know some ppl that told me it would be ok if I don`t fly always at full throthle.
Anyway what is the exact setup for the phoenix 25 esc to have the best power!?

Thanks

_________________
Carl (maverick0408)
-Power is your friend when you know how to use it...
http://www.maverick.rchomepage.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Thu Dec 01, 2005 6:38 pm    Post subject:  

You should not have any problems with that battery. It will not give you as much power as a 1320 though. There is nothing you can do to get more power out of the ESC, though there are some settings you can set that make it easier to operate in the air.

-Auto lipo detect
-Fast start
-Soft cut off
-No brake


Do not mess with the timing! it will only make things worse

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive