ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Funtana .40 for IMAC?
12 posts
 
   3DBatix Forum Index -> IMAC, Pattern
 
Author Message
Funtana1



Joined: 12 Jul 2004
Posts: 15

PostPosted: Thu Jul 29, 2004 6:33 pm    Post subject: Funtana .40 for IMAC?  

I got a few questions for you guys.
1st-Is this plane ok for the basic class of IMAC?
2nd-How should I mount the engine(inverted, sidewayz, etc.) Its a saito .91
3rd-Will this plane fly sportsman class too?
Thanks,
Trent

_________________
Team 3DFoamy
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1177
Location: Sunnyvale, CA

PostPosted: Thu Jul 29, 2004 9:03 pm    Post subject:  

You can fly the plane in basic no problem, just tune the throws down a bit. Im not sure if you are allowed a plane like that in sportsman, youll have to read the rules at www.mini-iac.com. Mount the engine on its side. It makes for the cleanest installation and has easy access to the glow plug.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 300
Location: Tacoma(area), WA

PostPosted: Fri Jul 30, 2004 2:45 pm    Post subject:  

Not in sportsman. It has to be an actual scale aircraft for everything above Basic.
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
Funtana1



Joined: 12 Jul 2004
Posts: 15

PostPosted: Fri Jul 30, 2004 7:29 pm    Post subject:  

Ok, thanks guys.
I got bad news on my funtana today... Its on backorder. Gonna take another week. Ive been considering the Funtana .90. Ive heard a lot of people on the forums talk about how much better it is than the .40. Either one I choose wont have an engine for a while. I talk to some people that watch me fly everytime i am there and they say i could probably fly just about anything.

My only worry is that the .90 is bigger than anything I have ever flown and I know I can fly its just a matter of getting used to sensitivity and higher landing speeds. Tell me if it has any bad habits on landing.

The only prior experience I have is my Alpha taildragger but I can hold it in knife enge and in a hover until it falls out. Im pretty quick on the controls. I try blenders but It wont go from the spiral/sin into a flatspin so I gotta move up to a more advance plane.

I flew a friends uproar with no problem. I also flew a few combat planes and a t-34 so ill keep the rates on low for a while and put in some expo. On my first few flights(or until im good enough), Ill be on the buddy box with one of the pros from the field.
Thanks for the help,
Trent

_________________
Team 3DFoamy
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1177
Location: Sunnyvale, CA

PostPosted: Fri Jul 30, 2004 8:01 pm    Post subject:  

The 90 is easier to fly than the 40 IMO.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Funtana1



Joined: 12 Jul 2004
Posts: 15

PostPosted: Fri Jul 30, 2004 9:46 pm    Post subject:  

Are they both about equal in difficulty? Like is the .90 any harder/easier than the .40
Thanks,
Trent

P.S.-Sorry if these questions seem stupid but this is the only plane I will be able to buy for a while so I want to get the right one.

_________________
Team 3DFoamy
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1177
Location: Sunnyvale, CA

PostPosted: Fri Jul 30, 2004 10:01 pm    Post subject:  

I think the 90 is easier to fly. It flies bigger, and better.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 300
Location: Tacoma(area), WA

PostPosted: Sat Jul 31, 2004 8:54 pm    Post subject:  

Not to mention the 90 looks better.
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
Funtana1



Joined: 12 Jul 2004
Posts: 15

PostPosted: Sun Aug 01, 2004 11:32 am    Post subject:  

Well a friend of mine is going to sell me a .46 size G-202 for $50. Im gonna get that and move the stuff from the alpha into it, and ill spend my other $250 bucks on a big ARF. Are there any good ARF extras or Edges for $250? Im gonna look for some used ones in case I cant find a new one. I dont want the Katana. Our club already has 2. Any other suggestions are fine.
Thanks,
Trent

_________________
Team 3DFoamy
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Sat Nov 13, 2004 8:36 pm    Post subject: Funtana .40 for IMAC  

I hope the 90 is easier to fly. I'm going from my Arrow trainer to it. Although it shouldn't be that bad' from Kyle Woyshnis' vid it can float. Boy can he do a low rolling harrier! My flying buddies say it's not bad, and our clubs president thinks I am a prodigy, because I can do a 10 foot high hover on my trainer after being out at the field 7 times. For an engine I'd say go with an evoloution 1.00. It's the same brand as whats on my trainer and runs well. I'll be using that engine, and have heard it has pullout like Zaks FC. Hope that helps.
_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Nov 14, 2004 4:06 pm    Post subject:  

the 90 should be a little easier to fly since its bigger it does land like a trainer
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sun Nov 14, 2004 4:48 pm    Post subject:  

Ya, just keep it slow, DO NOT GO FULL THROTLE, AT ALL, ANY BELOW A 10 DEGREE CLIME! Also keep the rates REALLY low for a while until you get used to it (work your way up). If you do keep them low it flys 10000 times better and easier than a trainer. A lot more forgiving, but more delicut so be careful and take it easy. Also keep it on the nose heavy side for a while too. Tailheavy planes fly a little harder and need a little more skill. Hope this helps.
-Tom
Back to top  
 
   3DBatix Forum Index -> IMAC, Pattern All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive