| |
| Author |
Message |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 1:06 pm Post subject: Meyrick and rolling harriers |
|
|
Meyrick
Will your ucando 60 do rolling Harriers? I have watched your instructional video.Thats amazing I tryed that on my aeroflight pro and cant even come close.Are you useing high rates on your ailerons. did you learn buy doing on roll at a time? |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 923 Location: Fremont, CA
|
Posted: Mon Dec 27, 2004 2:17 pm Post subject: |
|
|
Yes, UcanDo will do rolling harriers just fine. Maybe I outta shoot a new video of the UCD cause I have learned a lot of new tricks with it. The only thing it does not do well is harriers, you have to add a lot of spoileron mix so it doesn't drop a wing.
You will need at least 45 degree throws for good rollers. Practice knife edge manuever's first on both directions but just rotate to one side, then the sequence will just follow. For example rolling harriers rolling to the right, the sequence you would be from upright position is Full right aileron and hold it there, when it's on Knife edge position, give it full left rudder, when on inverted position give it down elevator, when it's back to knife edge position give it right rudder, when it's back to upright position give it up elevator. All this while holding the stick to full right aileron. Throttle is also key, if it's too fast the plane will climb. So the sequence is full right aileron and hold it there, left rudder, down elevator, right rudder, up elevator. Hope that helps. _________________ --Meyrick-- |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 2:46 pm Post subject: |
|
|
| Ok thanks Meyrick MY knife edge is not to bad so That should help alot.If you use high rates on ailerons isnt your roll rate to fast? |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 685 Location: Sunnyvale, CA
|
|
| Back to top |
|
 |
Radioflyer

Joined: 14 Sep 2004 Posts: 122 Location: Kalamazoo, MI
|
Posted: Mon Dec 27, 2004 6:22 pm Post subject: |
|
|
You guys ROCK  _________________ God bless us all, and keep us safe. |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 923 Location: Fremont, CA
|
Posted: Mon Dec 27, 2004 6:24 pm Post subject: |
|
|
Thanks Radio Flyer. I'm gonna redo the instructional videos cause the quality sucks.  _________________ --Meyrick-- |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 6:52 pm Post subject: |
|
|
[quote="Radioflyer"]You guys ROCK [/quote
Yes They do Rock I have been trying to do the rolling harrier for 3 hours now on the sim and it seems impossible  |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 923 Location: Fremont, CA
|
Posted: Mon Dec 27, 2004 7:40 pm Post subject: |
|
|
[quote="ucando2"] | Radioflyer wrote: | You guys ROCK [/quote
Yes They do Rock I have been trying to do the rolling harrier for 3 hours now on the sim and it seems impossible  |
Ucando2, what SIM do you have? Make sure you also have a plane that is capable. _________________ --Meyrick-- |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 8:00 pm Post subject: |
|
|
Meyrick I have aerofly pro Iam flying with the big Extra 300s and the big cap 232br Iam also useing a 6xa radio that has dual rates. I just cant seem to get the timeing down right. Every thing happens so fast  |
|
| Back to top |
|
 |
TeamMoki3D

Joined: 08 Oct 2004 Posts: 424 Location: Belvidere, NJ
|
Posted: Mon Dec 27, 2004 8:17 pm Post subject: |
|
|
just take things slow, dont rush, and make sure you stall yourself and then get into a harrier, then start rolling and just use elevator for one try, then just use rudder for one try, then start with elevator and add in very little rudder, then even them out and keep repeating.. worked for me! _________________ "uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!" |
|
| Back to top |
|
 |
TeamMoki3D

Joined: 08 Oct 2004 Posts: 424 Location: Belvidere, NJ
|
Posted: Mon Dec 27, 2004 8:35 pm Post subject: |
|
|
i forgot, what people are saying is right, just practice your slow rolls and knife edge and it should come naturally, your jsut using more extreme of inputs.
hope this helps
~saucy~ _________________ "uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!" |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 8:39 pm Post subject: |
|
|
| TeamMoki3D wrote: | | just take things slow, dont rush.. and for practice just use elevator for one try, then just use rudder for one try, then start with elevator and add in very little rudder, then even them out and keep repeating.. worked for me! |
OK Thanks Saucy Iam geting the hang of rolling circles useing just elevators allthough I have a hard time controling going in a nice circle.And I can do some good slow rolls useing the elevators and rudder.As for rolling harriers when I get locked in a harrier then when I do my roll it just wont stay locked in the harrier then the roll speeds up then Iam just doing a fast roll Or headed for the ground???? Meyrick said the plane he used on his sim does not do a good harrier if it wont do a good harrier then how come it does a good rolling harrier?
BUZZ |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 8:44 pm Post subject: |
|
|
| TeamMoki3D wrote: | i forgot, what people are saying is right, just practice your slow rolls and knife edge and it should come naturally, your jsut using more extreme of inputs.
hope this helps
~saucy~ |
Saucy what sim are you using? |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 923 Location: Fremont, CA
|
Posted: Mon Dec 27, 2004 8:51 pm Post subject: |
|
|
Ok, I changed the training videos, they are better quality now. _________________ --Meyrick-- |
|
| Back to top |
|
 |
TeamMoki3D

Joined: 08 Oct 2004 Posts: 424 Location: Belvidere, NJ
|
Posted: Mon Dec 27, 2004 8:59 pm Post subject: |
|
|
the sky no sim bro.. just the real world _________________ "uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!" |
|
| Back to top |
|
 |
TeamMoki3D

Joined: 08 Oct 2004 Posts: 379 Location: Belvidere, NJ
|
Posted: Mon Dec 27, 2004 9:01 pm Post subject: |
|
|
| ucando2 wrote: | | TeamMoki3D wrote: | | just take things slow, dont rush.. and for practice just use elevator for one try, then just use rudder for one try, then start with elevator and add in very little rudder, then even them out and keep repeating.. worked for me! |
OK Thanks Saucy Iam geting the hang of rolling circles useing just elevators allthough I have a hard time controling going in a nice circle.And I can do some good slow rolls useing the elevators and rudder.As for rolling harriers when I get locked in a harrier then when I do my roll it just wont stay locked in the harrier then the roll speeds up then Iam just doing a fast roll Or headed for the ground???? Meyrick said the plane he used on his sim does not do a good harrier if it wont do a good harrier then how come it does a good rolling harrier?
BUZZ |
when that happens just lower your throttle, slow your rolls down, and use more input on elevator. or just add power and stop the harrier to start over. _________________ "uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!" |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 9:21 pm Post subject: |
|
|
| Meyrick wrote: | | Ok, I changed the training videos, they are better quality now. |
Meyrick your training videos Website are a great service to the rc world after learning on the nextstar this pass spring after I got my ucando I came across your website your training videos taught me how to do the knife edge spin and the blender Well my blender dont look the greatest but it is how I learned how to do my inverted flat spins The rolling harriers were way out of my league. then this summer I had to reformat the computor and lost every thing. then the time had come that I wanted to learn how to do the rolling harrier and all I could think about was waching your training video.I spent 3 days in my search engine trying to find that training video. I wish there was more of them. All I can say is THANKS and keep up the good work. |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 9:29 pm Post subject: |
|
|
| Ok Thanks saucy I will try that. To slow my roll down do I just not hold full ailerons? |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 871 Location: Fremont, CA
|
Posted: Mon Dec 27, 2004 9:51 pm Post subject: |
|
|
| ucando2 wrote: | | Ok Thanks saucy I will try that. To slow my roll down do I just not hold full ailerons? |
You can do full ailerons but throttle back. Almost at a stall so the plane won't roll so fast. _________________ --Meyrick-- |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 10:22 pm Post subject: |
|
|
| ucando2 wrote: | | Meyrick wrote: | | Ok, I changed the training videos, they are better quality now. |
Meyrick your training videos Website are a great service to the rc world after learning on the nextstar this pass spring after I got my ucando I came across your website your training videos taught me how to do the knife edge spin and the blender Well my blender dont look the greatest but it is how I learned how to do my inverted flat spins The rolling harriers were way out of my league. then this summer I had to reformat the computor and lost every thing. then the time had come that I wanted to learn how to do the rolling harrier and all I could think about was waching your training video.I spent 3 days in my search engine trying to find that training video. I wish there was more of them. All I can say is THANKS and keep up the good work. |
WOW Meyrick the quality of your training videos really look good now THANKS A BUNCH  |
|
| Back to top |
|
 |
Radioflyer

Joined: 14 Sep 2004 Posts: 121 Location: Kalamazoo, MI
|
Posted: Tue Dec 28, 2004 5:43 pm Post subject: |
|
|
How about a training forum This stuff is great, and unfortunatly it's cold, I have no foamies, and no sim(yet!). I hope I don't forget where this is  _________________ God bless us all, and keep us safe. |
|
| Back to top |
|
 |
TeamMoki3D

Joined: 08 Oct 2004 Posts: 379 Location: Belvidere, NJ
|
Posted: Tue Dec 28, 2004 5:48 pm Post subject: |
|
|
| Meyrick wrote: | | ucando2 wrote: | | Ok Thanks saucy I will try that. To slow my roll down do I just not hold full ailerons? |
You can do full ailerons but throttle back. Almost at a stall so the plane won't roll so fast. |
yeah, a harrier is a post stall manuever, you are actually flying a powered stall, to slow your roll rate the best way is to throttle back. _________________ "uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!" |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Tue Dec 28, 2004 6:36 pm Post subject: |
|
|
| Still trying I thinks this rolling harriers is going to take me a year to learn. |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 871 Location: Fremont, CA
|
Posted: Tue Dec 28, 2004 7:54 pm Post subject: |
|
|
| ucando2 wrote: | | Still trying I thinks this rolling harriers is going to take me a year to learn. |
Just keep trying. I thought the same thing when I was trying to do them. Took me a couple weeks to get my fingers trained on the sim and a couple of months on the actual plane. Now I'm working on getting them lower. This time it's all about getting rid of fear... _________________ --Meyrick-- |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Tue Dec 28, 2004 8:29 pm Post subject: |
|
|
Thanks Meyrick I wont give up Why is it that some planes dont do a good harrier but will do a good rolling harrier  |
|
| Back to top |
|
 |
Fredy

Joined: 25 Jul 2004 Posts: 45
|
Posted: Tue Dec 28, 2004 9:55 pm Post subject: |
|
|
i also wanted to ask about my whings rocking during harrier. how much spoilerons should I mix? _________________ I would pay a monthly fee for a 24hr daily "R/C Channel" that can show in Mexico. |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 871 Location: Fremont, CA
|
Posted: Tue Dec 28, 2004 10:23 pm Post subject: |
|
|
| Fredy wrote: | | i also wanted to ask about my whings rocking during harrier. how much spoilerons should I mix? |
Which plane Fredy? _________________ --Meyrick-- |
|
| Back to top |
|
 |
Fredy

Joined: 25 Jul 2004 Posts: 45
|
Posted: Wed Dec 29, 2004 6:49 am Post subject: |
|
|
this one:
http://3dbatix.com/forum/viewtopic.php?t=279
I want to see if someone that has it, can help me feel safer about the wings rocking to bad. I mean I want to know if it wont suddenly stall spin on me near the ground...... _________________ I would pay a monthly fee for a 24hr daily "R/C Channel" that can show in Mexico. |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 871 Location: Fremont, CA
|
Posted: Wed Dec 29, 2004 7:28 am Post subject: |
|
|
| Fredy wrote: | | i also wanted to ask about my whings rocking during harrier. how much spoilerons should I mix? |
Try half an inch spoilerons. _________________ --Meyrick-- |
|
| Back to top |
|
 |
| |